ReviewsSwitch Power Board

Charger for Nintendo Switch,AC Adapter Compatible with Switch OLED and Switch Lite,15V/2.6A Power Supply Support Switch TV Mode,5 FT Power Cable USB C Port,2.5 Hours Fast Charge Switch Power

Replacement for Official Nintendo Switch Charger--switch charger come with a certified PD protocol.It not only compatible nintendo switch ,switch OLED and nintendo switch lite,but also compatible most type c devices(pro controller,nintendo switch dock,Third party switch dock,switch charging station,etc).
AC Adapter 40W Fast Charger--AC adapter provide two output mode-5V1.5A and 15V2.6A, Intelligent assign electric current according to your devices. Most up to 40 Watt.Fully charge within 2.5 hours（One hour of high-speed charging 60% and 1.5 hours of slow charging to extend battery life).
Support Switch TV Mode --15V2.6A full power output 39 watts support switch tv dock mode well. No display break or low power issue. Ideal replacement ac power adapter for switch. No need to unplug the official charger from the charging board often..
Multi Protection and Safe Charge--switch power built smart PD IC chip comes with CE/FCC/ROHS Certifications, and provides the over-charging protection, over-voltage protection, over-current protection, short-circuit protection.In addition,switch charger thermally conductive and fireproof ma....

Check Stock

seeed studio - Grove - HCHO Sensor (Semiconductor VOC Gas Based WSP2110)

【Powerful and Compact】Jetson Mate is a carrier board which can install up to 4 Jetson Nano/NX SoMs. There is an on board 5-port gigabit switch enabling the 4 SoMs to communicate with each other.
【Easy to build and config】One master node with 3 worker nodes with the ability to power on/off the worker nodes separately.With one 65w PD power adapter and 1 ethernet cable, developers can easily build their own Jetson Cluster.
【Applications】GPU Server,GPU Cluster,Homelab,etc..
【Part List】Jetson Mate x 1,Jeston Mate Cooling Fan Top x 1,Jetson Mate Dedicated Case x 1.
【Note】The kit does not include the 65w PD power supply, please make sure you have this sort of power supply for charging.

Check Stock

Dorhea ESP8266 ESP-12 NodeMcu D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board + Relay Shield + 2.54mm 40Pin Single Row Male Pin Header - 3Set

The esp8266 module is 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
1 analog input(3.2V max input). Micro USB connection.
WiFi internet development board 5V 1A switching power supply (switching power supply）onboard..
5V relay shield is a digital switch to control much higher voltages and currents than esp8266 mini microcontroller, controlled by the D1 , the relay will switch to allow current to flow or turn off, depending on wiring..
40 pin 0.1inch (2.54mm) male pin header connector PCB board pin strip electronic component, they are easy to be cut to any length if needed, you can cut or score with some electronic tool..
The pin header is an ideal connector for the PCB board and intergrated circuit, used widely in the computer and breadboard, compatible with raspberry pi or other electronic project..

Check Stock

Maleficent Free Fall

A DARK TWIST ON MATCH 3 – Switch and slide the board of enchanted gemstones to create matches of 3 or more as you trigger cascading combos and conquer original objectives!.
EVIL HAS A BEGINNING – Begin your first chapter as young Maleficent, journey through the map to explore the untold story, unlock her raven, Diaval and discover MANY other mysterious surprises!.
THE POWER OF MALEFICENT – Cast Maleficent’s green magic to instantly vanish the same color gemstones, call upon Diaval to swoop down and rearrange the board, or cast tendrils of thorns to clear entire rows and columns! Unlock more unique power-ups along the way and experience Maleficent’s fierce desire for revenge!.

Check Stock

Replacement Power On Off Circuit Board Reset Switch Board for Playstation 2 PS2 70000 75000 77000 Slim & Lite

Applicable model: Playstation 2 PS2 70000 75000 77000 7000x Slim & Lite.
Repair your broken Power on/off switch board and cable.
Please make sure that this is the model and product type you need, wish you a pleasant shopping.

Check Stock

Love and Lies (Ep)

Class D MOSFET Monoblock Power Amplifier.
Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts.
Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz.
Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150.
Stable at 1 ohm | Remote Subwoofer Level Control Included.
Highly Efficient Heatsink Design allows for Maximum Reliability & Performance.

Check Stock

Makeronics Developer Kit for Jetson Nano -7inch Touch| IMX 219-77 Camera with Case| 64GB Class 10 TF Card with Card Reader | Jetson Nano Acrylic Case For Both A02 and B01| 8265 Wireless Card + Antenna

✔️Include Nano Acrylic Case(black),7inch HDMI LCD 1024x600 IPS Capacitive Touch Screen , 8265 wireless card with 6DB antenna,IMX219-77 camera board with camera holder, 64GB class 10 TF card along with a card reader. HDMI cable. Notice: Jetson Nano Board is not included. The newly updated case (start from 2020/07/15) is compatible for Jetson Nano board B01 and A02 Version..
✔️[Power on and Reset Function] Equippped with power switch and reset switch.
✔️[Dedicated PWM Cooling Fan] DC 5V,4Pin reverse-proof connector(with PWM function), Dimentsions 40mmx40mmx10mm,Make Sure Nano Work Stable..
✔️[Wireless-AC8265] Supports 2.4GHz / 5GHz dual band WiFi and Bluetooth 4.2. Equipped with dual 6DBi antennas.
✔️[PROFESSIONAL SUPPORT] Detialed instruction manual. Quick-responding technical support..

Check Stock

Geekworm X820 Metal Case + Power Control Switch + Cooling Fan Compatible with Raspberry Pi 3B+/3B & X820 V3.0 SSD&HDD SATA Storage Board & X735/Rock64

Case Size(Installation): 11.3cm x 9.1cm x 6.2cm / 4.45inch x 3.58inch x 2.44inch.
Note: the Max. compatible thickness of the 2.5" SATA SSD/HDD is 10.4mm/0.41inch. (The stander 2.5" SATA SSD/HDD is 9.2mm/0.36inch)..
This is metal case with super mute cooling fan kit for X820 V3.0 SSD/HDD storage board user, very easy to install, perfectly compatible with Raspberry Pi 3 Model B+/3B/2B/B+/Rock64 & X820 V3.0 Board&X735 Board..
Note: Raspberry Pi, X820 board, SSD/HDD and power adapter is not included in the packing list..
Installation Video refer to Geekworm WiKi search X820.
Power switch with beatiful LED indicator to control the power of X820 V3.0 and the Raspberry pi.
Support super mute cooling fan, hundreds of round cooling holes on both side of the case, almost no weekeness for the bluetooth and WIFI signal..

Check Stock

DPST 1NO 1NC 8Amp Power Relay Module, Briidea 24V AC/DC Power Relay Control Voltage, White

INPUT CONTROL SIGNAL: Voltage AC or DC 24V, Current 17mA..
OUTPUT CURRENT: Output switch DPST 1NO 1NC(Double Pole Single Throw, 1 Normally Open and 1 Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
SIMPLE & PRACTICAL: This passive power relay module is simple and practical, which is very convenient to use. It can support both Normally Open and Normally Close..
EASY MOUNT: The power relay is of compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
LED INDICATION: This power relay has a led indicator for relay action indication. It is obvious to know the status of the switch at a glance..

Check Stock

CRAFTSMAN Sander, 1/4-Inch Sheet (CMEW230)

COMPLETE TASKS WITH EASE: 2.0 Amps and 13,500 OPM of the electric sander gives you the power to complete tasks with ease.
ON-BOARD DUST BAG: High performance dust collection of the 1/4 sheet sander featuring on-board dust bag and connection to 1-1/4-inch vacuum hose.
DURABILITY: Dust sealed switch provides added durability.

Check Stock

Desktop Computer PC Power Button Switch: Mechanical Key External Desktop Computer Power On Off LED PC Power Switch Button Extension for Motherboard Boot

External Desktop PC Power Switch:This button is made of keyclick of mechanical keyboard, keystroke sounds crisp and loud, durable and reliable for more than1,000,000 times,It is recommended for home users, computer rooms, bare board machines, water-cooled chassis DIY, etc.
Easy to install by Magnet and Sticker: Please check the installation instructions on product description. Just connect the POWER LED+, POWER LED-,POWER SW connectors with motherboard and stick the adhesive plate or use the magnet on the right place..
DIY your own Key Caps: The Cap of the pc button is removable, you can replace the cap to your DIY caps easily (+ type of key caps will be compatible), extra caps are not included.
Put the PC Power Button in the right place: If the case is placed in a hard-to-reach place, use this switch to lead to a place where it is convenient to operate..
Package included: 1x Magnet Computer Power Switch ON/OFF with 2M cable.

Check Stock