ReviewsSwith Mode Power Supply

CUXMUX Remote Control Dog Balls, Peppy Pet Ball for Dogs, Aggressive Chewers Toy, Automatic Interactive Rolling & Bouncing Busy Ball Orange

  • Remote Control Interactive Dog Toys: CUXMUX dog balls can be turned on/off, change the direction, swith between crazy and normal mode with the remote control..
  • Suitable for Medium Dogs: The size of this 3.15" dog toy is perfect for medium to large dogs, premium high toughness food grade TPR rubber case resist the dog balls from aggressive chewing.
  • Power & Charging Tips: The power button and charging hole are on the machine, you need to unscrew the outside covering to recharge and turn on/off of the ball. With 2 Hours fully charge, the peppy pet ball for dogs can work 4 hours in crazy mode constantly..
  • Attract Dogs Actively: Unlike the dog ball thrower launcher, CUXMUX active rolling ball for dogs rolls on its own, bounces and shakes for 10 seconds, then have a rest, the smart dog toy will roll automatically after 2 minutes to attract dogs. The RGB lights will also flash intervals to enhance dog's attraction..
  • The waterproof smart busy ball works on hard floors and low pile carpet, it struggles on medium high pile area rug, it swims well on the surface of water. It....
Check Stock

NOYAFA-NF-488 PoE Tester Inline Tester For Power Over Ethernet, Network Cable Continuity Checking, DC Power & Switch Loop-back Test PoE Detector by - Black

  • .Test the information of the standard PoE device, such as af t standard, power supply voltage, power supply polarity and mode..
  • · Identify the supply voltage, power supply polarity and mode of non-standard PoE devices..
  • · Check the short circuit, crossover and open circuit status in the network cable..
  • · Test the current, voltage and power consumed by DC appliances..
  • . The loop-back test function of the switch..
Check Stock

TP-Link N150 Wireless 3G/4G Portable Router with Access Point/WISP/Router Modes (TL-MR3020)

  • Interface: 1 10/100Mbps WAN/LAN Port, USB 2.0 Port for 3G modem, a mini USB Port for power supply.
  • Button: Quick Setup Security Button, Reset Button, Mode Switch.
  • Wireless Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b.
  • Ships in Certified Frustration Free Packaging.
  • Compatible with Select ATT/Verizon/Sprint/T Mobile USB Modems.
  • Industry leading 2 year warranty and unlimited technical support.
Check Stock

bnafes 4Sets Magnetic Reed Switch, Magnetic Door Switch/Magnetic Contact Switch/Normally Open Closed NC NO Door Alarm Window Security, for DC 5V 12V 24V Light

  • Contact Capacity: 500(mA) (Maximum Switch Current).
  • 3. Great for alarm,LED,Relay,GPS low voltage devices...etc.,Trigger Range: 10-20mm.
  • 4. Magnetic Contact sensors can be added to an existing wired Alarm Systems. They are ideal for protecting doors,.
  • 5. Package Content: 4 Sets x Magnetic Door Swith.
  • Size: 55*12.5*11.5mm / 2.17" x 0.45" x 0.45"(L*W*H) a package of screws.
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • Note: If you use UPS to power Raspberry Pi3b/3B+ while charging, please make sure that the input power is not less than 2.5A. Recommended use: 3V 2.5A power supply★ The document link is obtained in the product description.
  • The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
  • The UPS has overcharge and overcurrent protection functions: When the UPS e....
Check Stock

FiiO AM3 Balanced Output Headphone Amplifier Module for X7 Portable High-Resolution Audio Player, Titanium

  • ...ayer. Not only are "H" type heat dissipation and VC liquid cooling technologies adopted, the bluetooth mp3 player M17's 151g unibody aluminum alloy frame also effectively transfers heat out of the device. Finally, the cooling fan stand also further makes sure heat is rapidly transported away..
  • [Desktop-quality power supply]: The M17 desktop mp3 player contains two power supplies – a battery power supply and a power supply powered by external DC power. The battery power supply allows you to use the M17 lossless mp3 player in situations where there is no access to a power outlet. Under DC power supply, voltage in the analog circuit is increased by 35% up to 11.5V compared to under battery power supply.
  • and the battery is kept healthy since it is not used in this mode..
  • [Desktop-grade gain]: Under battery power, there are 4 gain levels: low, medium, high, and headphone mode. When under DC mode, the enhanced over-ear headphone mode gain is unlocked, with a truly desktop level of amplification gain. In balanced output, gain can get as high as 16dB – allowing the M17 audio player to easily drive most headphones..
  • [A true smartphone-like experience]: Android 10 OS open to install 3rd party apps.
  • Bluetooth 5.0 with support for aptX Adaptive, supports u....
Check Stock

DC Power Supply Variable, 30V 10A Bench Power Supply with Memories, Output Switch, Adjustable Switching Regulated Power Supply with 4-Digits Display, Encoder Adjustment Knob

  • High Precision with 4-Digit and Power Display: Kungber 30V 5A DC benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.001A. You can easily tune it within 0-30V and 0-5A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, Therma....
Check Stock

EX Mini Digital Reverb Pedal

  • 3 Different Reverb Settings: "Spring" mode is snappy and dark. This works very nicely with stabbed chords. "Well" mode is bouncy, sounding like notes bouncing off the walls. "Room" mode allows you to get some very wet and atmospheric sounds and works beautifully with ambient sections..
  • With the help of the function knobs, this reverb pedal can bring you to some strange territory rather quickly. The Dry/Wet knob controls the amount of reverb in the mix, the Time Knob adjusts decay time, and the Level Knob controls the overall volume..
  • Features - LED changes color depending on different reverb modes. Red for "Room", Green for "Spring", and a Red/Green Mixture for "Well", which makes it very clearly distinguishable on a dark stage..
  • Housed in a compact, die-cast box. 1/4 inch input and output jacks and an AC adapter input on the top of the unit. Uses a standard 9-volt negative tip power supply, or add a daisy chain to run multiple pedals from the one power supply source. (Adapter not included)..
  • NOTE: If you have any problems with this device, try using it with a high quality alkaline battery or the 9V battery adapter from our store to determine compatibility with your pedalboard power supply..
Check Stock

ISDT P10 LiPo Battery Balance Charger Duo 250WX2 400W Dual Channel Output 1-6S Li-ion Life NiCd NiMH LiHV PB Smart Battery (Power Supply is NOT Included)

  • [High Power Synchronous Dual Channel,with Smart Charging]-Smart High Speed Processor delivers parameter interfere to each port.Hassle Free with Maximum charging power up to 250W for single port..
  • [Synchronous Parallel charging]-Built-in High Speed Processor Synchronous Balance two channel charging.Maximum Parallel Charging power up to 400W.P10 deliver charging current range from 10A ~ 16A..
  • [Support USB interface to upgrade firmware]-Connecting the computer through the USB-C interface, upgrade to the latest firmware.Always maintain the advanced performance and features..
  • [Adjustable Digital Power Supply]-The CH1 of the charger can become a DC power supply.In adjustable digital power supply mode,the Max. power is 120W.CC: 0.2~5A,CV: 5~24V..
  • [Lights off in the dark,introducing the dark mode]-scOS 2.0 new dark mode feature,Suitable for low light scenario,System will adjust the interface in dark tone,Reduce light damage to user’s eyes.While remaining the iconic and comfortable charging display style..
Check Stock

1Pcs Sound Activated Light, LED RGB Light Bar, 32 Bit Music Pickup Rhythm Light, USB Rechargeable, Ambient Light for Car, DJ, Gaming Room, Party, TV

  • Two Buttons: Mode button and light mode button. When the light bar blinks, you can select the mode and press "III" to change the color. SSS key transformation mode..
  • Superior Performance: The rhythm light has 32 LED beads, 32 bit ARM processor, 18 color modes to choose from, no less than 8 display modes to achieve dynamic performance of music and sound..
  • Nose Reduction: Color changing LED strip adopts ABS housing. Built in high sensitivity microphone, AGC intelligent noise reduction function, to ensure that LED light bar can be used in a noisy environment..
  • Power Supply: USB power supply, plug and play, support mobile power supply charging, family plug USB, computer USB, car USB charging, widely used, safe and secure use..
  • Application and Gifts: The rhythm light bar is suitable for relatives and friends gathering, birthday party, home theater, outdoor activities, DJ studio, game room, PC, TV. It is the perfect gift for family and friends..
Check Stock

ORIA Digital Clock, LED Alarm Clock, 6.5inch Large Display LED Clock with Snooze, USB Charging Ports, 3 Adjustable Brightness Suitable for Bedroom, Office

  • 5 Display Modes:This upgraded version the alarm clock has 5 display modes: clock mode, alarm mode, date mode, temperature mode, night mode, which can meet your daily needs..
  • 3 Levels of Brightness: Digital alarm clock provides 3 different levels of brightness, which can be adjusted to a comfortable brightness manually to protect your eyes and save energy at night..
  • Dual Power Supply Methods: It supports USB power supply and AAA. This alarm clock has a time memory function when using AAA.
  • When powered by USB alone, there is no memory function after power off. NOTE: The screen will not always be on when the AAA provides power instead of the plug mode..
  • Large LED Display: This Digital alarm clock comes with 6.5 in large screen and large font so that you can easily read the digital display..
  • Heartwarning Reminder: If there are any problems with the use or function of the product, or if the product is defective/damaged, please contact the seller first, we will do our best to solve the problem for you..
Check Stock