ReviewsSwivel Holder

KTRIO 10 Pack Lanyards with ID Badge Holder, Breakaway Flat Polyester Lanyard with Clear ID Holder, Name Tag Badge Holder for Office, School and Nurses

  • [ Dimensions ] Vertical ID card holder: 4.6 x 2.7 inches.
  • Fit card size: 3.58 x 2.52 inches. Neck strap is around 19" long. Discreet ⅜”width is not too wide or short..
  • [ Badge Holder ] ID badge holder using premium PVC material, water-proof, dust-proof and high transparency..
  • [ ID Lanyard ] Black lanyard with detachable buckle, Breakaway Lanyards are made of polyester fabric with higher strength and durability..
  • [ Swivel J-hook ] Metal J-hook allow your ID card swivel freely, lightweight and easy to connect..
  • [ Quality Guarantee ] Each KTRIO product is guaranteed with 100% satisfaction assurance. Any issues related to product quality please feel free to contact us for a full refund or replacement..
Check Stock

Portable Webcam Stand and Phone Holder with 2 Cell Phone Clamp 360° Swivel Mount Compatible with Logitech C920 C920S C922 C925e C930e Brio 4K, iPhone, for Live Stream, Video Conference(2 Pack

  • Portable Webcam Stand: with steel swivel 1/4" thread head and 2pcs universal cell phone clamps, can work as webcam stand or phone holder in needs. Not only storage easily but portable..
  • Desk Webcam Mount be made of steel material, its stiff jaw can clamp on the any surface plate tightenly . Be widely used on laptop, desk pc, computer, desk, bed, office, guitar, piano....
  • Phone Holder: Each cell phone stand with universal phone clips, Width of cell phone clamp can range up to 3.5 inch, compatible with almost ALL smartphones with or without phone case, suitable for iPhone, Samsung,Xiaomi, Huawei, and other Android smart phones..
  • Each webcam stand or cell phone brackets equipped a 360° steel swivel with 1/4" thread head, can be easily swivel to any angle in needs. Perfect for Live Stream, video conference, make-up, Facebook, YouTube, Twitter, Snapchat, FaceTime...
  • What you get: 2pcs computer webcam stand (or cell phone holder), 2pcs universal cell phone clamps. NOTE: The max load of webcam stand mount less than 1.1lbs.
Check Stock

CPU Holder Under Desk Mount - Adjustable Wall PC Mount with 360° Swivel Heavy Duty Computer Tower Holder Holds up to 22lbs by HUANUO

  • CONVENIENT CPU HOLDER, MORE SPACE UNDER DESK: Hold the CPU Tower under your desk while keeping your CPU off the floor so you can free up space for a....
  • UNIVERSAL COMPUTER TOWER HOLDER: The height(11.5" to 21") and width(2.7" to 8”) of our CPU mount is adjustable, making sure this holder fits most....
  • ADJUSTABLE CPU MOUNT WITH 360 DEGREES SWIVEL:This fully adjustable mount features 360øof swivel so you can place your CPU at a better angle and....
  • HEAVY DUTY & STURDY CPU STAND: Well constructed with solid materials, this CPU stand can securely hold up to 22lbs without a problem. Rest assured....
  • EASY ASSEMBLY WITH GREAT PROTECTION: Comes with required tools and an installation guide. This CPU mount is super easy to install. The sticky foam mat....
Check Stock

WIRESTER Personalized Retractable ID Badge Holder Alligator Clip, Custom Badge Reel with Your Photo for Office Worker, Medical Staffs, Nurse, Doctor, Teacher, Student

  • CUSTOMIZE : Click 'Customize Now' and upload your photo to create a custom badge reel ID holder. NOTE: WE DO NOT ACCEPT IMAGES THAT ARE PORNOGRAPHIC OR HAS COPYRIGHTED CONTENT. Personalized items cannot be returned, unless there is a manufacturing error or product defect..
  • MATERIAL: Made of quality acrylic material, the ID name badge holder reels with swivel clips are lightweight, durable and retractable..
  • SIZE: The acrylic ID badge reel measures approximately 2 x 3.54 inches (5 x 9 cm)..
  • CONVENIENCE: The acrylic badge holder reels come with an swivel clip on the back for easy attachment to your clothing, so they are very convenient for your daily work. The retractable cord extends to allow your badge to be swiped or retracted easily. Likewise, the clip on the back can tightly clamp on your uniform and the sturdy plastic snap strap securely protects your ID cards, name cards or badges without falling off your uniform..
  • NICE GIFTS: These cute acrylic badge holder reels will be a great gift choice for your friends, colleagues, families as an excellent decoration for ID cards, name cards or badges.
Check Stock

Vive Attachable Cup Holder - Cupholder for Stroller Wheelchair Desk Water Bottle Coffee Mug Drink Glass Can - Adjustable Mountable Clip for Bike Rollator - Large Universal Portable with Clamp

  • NOW YOU CAN ALWAYS KEEP YOUR BEVERAGE NEARBY: Our Fully Adjustable Cup Holder by Vive easily attaches to many devices (walkers, rollators, scooter,....
  • SECURE, TOOL-FREE INSTALLATION: You can easily attach our cupholder to the side or front bar of any walker, rollator, scooter, or similar mobility....
  • EXTENDABLE SWIVEL BASE: Its extendable base accommodates containers with a base size of up to 3” in diameter. The base also swivels, allowing you to....
  • VERSATILE AND UNIVERSAL FIT: Featuring a strong clamp mechanism and a swivel base, our durable Vive drink holder accessory easily attaches to any....
  • VIVE GUARANTEE: You can purchase this durable cup holder now with confidence. We offer a one-year guarantee..
Check Stock

4 Pieces Dinosaur Badge Holder Dinosaur Badge Reel Cute Felt Retractable Badge Holder with Alligator Clip Nurse Doctor Volunteer Teacher Student

  • Soft material: the dinosaur felt badge holder is made of quality felt, plastic and metal, wear-resistant and durable, processed with exquisite stitching and cute appearance, durable enough for long time using.
  • Adorable dinosaur: the felt retractable badge holder is designed with novel dinosaur shape and embellished with three pink hearts, mainly in green color will brighten up your sight during boring work, also add vigorous scene for your work.
  • Size information: each dinosaur badge reel measures approx. 8 x 3.5 cm/ 3 x 1.4 inches, and the retractable nurse badge clips can up to 60 cm/ 24 inches long, which allows you to show your ID easily without having to take it off all the time.
  • 360 Degree swivel alligator clip: the felt badge holder is designed with a 360 degree swivel alligator clip, which makes it easy and convenient to wear from any angle and make your badge straight up at the same time.
  • It's convenient for carrying your keys, ID badge holder, credit cards and working badges.
  • Package content: you will receive 4 pieces of cute dinosaur badge reels with clip, enough to meet your daily use and replacement, you can also share with your colleagues and friends.
Check Stock

Shower Head Holder All Metal Handheld Shower Wand Bracket Adhesive Shower Wall Mount Holder Brass Shower Spray Holder Brushed Nickel Drill Free Glue Installation

  • ...justing】:This shower head holder bracket is movable and adjustable. Due to the leverage, hand shower holder is easy to adjust and move after putting handheld shower into shower head wall mount holder and installing on the wall. But if without hand shower and any support point, it is hard to move and adjust. The swivel ball joint is tightened to bear heavy shower heads without sliding down easily. After using for some time, the shower wand holder works fine..
  • 【Card Slot Diameter】:The shower head holder nickel is designed with tapered card slot. Its top diameter is 0.9”(23mm), the bottom diameter is 0.78”(20mm), its depter diameter is 1.14”(29mm), fits for shower hose bottom diameter between 0.75inch-0.78inch(19-22mm). Please mind and measure your shower hose bottom diameter before you order. NOT fits for shower hose bottom diameter >=0.9inch(>=23mm). (NOTE: Waterpik Massages Handheld Shower doesn’t work for this shower head wall holder)..
  • 【Drill-Free Hand Shower Holder Mount】:Provided with a strong adhesive glue for installation. This adhesive shower head holder is easy to install in just few minutes. No drilling, No screwing needed, No harm to wall surface. The adjustable shower head holder can freely swivel and adjust to ....
Check Stock

AboveTEK Universal Magnetic iPad Wall Mount Swivel Holder 360° Rotating Clamp Fits 6.6-13 Display Tablets Strong Attach to Metal Surface on Cabinet Whiteboard Kitchen Fridge Steel Car Chasis

  • STRONG MAGNETIC TABLET MOUNT - Eight solid magnets wisely arranged in large pattern for strong magnetic power with extreme stability to be a solid....
  • TWO EXTRA HOLDERS - Two size rubber padded bracket holders collectively fit various Apple iPad Mini Samsung Galaxy Tab Android tablets with width or....
  • 360° SWIVEL TABLET HOLDER - Highly flexible 360° swivel ipad holder combined with horizontal/vertical design offers great adjustment without missing....
  • SOLID & STEADY STRUCTURE - Strong joint between magnetic panel and bracket holder ensures sturdy structure. No need to worry about your pricey tablet....
  • WIDELY USED - Not only is this a magnetic ipad mount to be used at home office school metal surface such as classroom whiteboard, metal....
Check Stock

2 in 1 Metal Phone Tripod Mount+Rotating Cold Shoe Tilt Angles,Compatible with iPhone Samsung Smartphone Holder Adapter, Desktop Tripod for Cell Phone,Video Live Streaming Vlogging Rig

  • Double locks design: The locks for both the clamping of your phone and rotation are superb! Clamping lock: you can rotate the steel ring lock making it impossible to remove the phone from the mount. Let you use it absolutely safely.
  • Rotation lock: push the metal lever locks and unlocks the swivel. You can swivel the mount to any angle and with a less than 3 mm motion of this metal lever the swivel is locked in place..
  • Unique cold shoe design: with the Unique design rotating cold shoe mount, you can adjust the angle of the additional microphone or OLED light any degrees at any time you want, no need to remove and reinstall. Patent design.
  • One holder for all: ARNARKOK mobile phone holder adapter has several standard ¼ inch screw attachments, so you can attach your phone to virtually any tripod, monopod, stabilisers and selfie stick with a ¼ inch screw. This is an indispensable device for YouTubers, Vloggers and outdoor photographers..
  • Compatible with iPhone 13/13Pro/13Pro Max/12/11Pro/11Pro Max/X/Xs/XR/Xs Max,8/7/6/6s, iPhone 6/6s plus, iphone SE,Samsung Galaxy s10s10 plus S9/S9+,S8/S8+/S7/S6/S6 edge, Note 10 9 8 5 4 3 and many other brands and models.
  • NOTE: Smartphone and LED light are NOT included.
Check Stock

Metal Phone Tripod Mount w Rotatable Cold Shoe,360 Rotation & Tilt Angle,Compatible with iPhone Cell Phone Tripod Mount Adapter, Phone Mount for Tripod,Tripod Phone Mount,Video Vlogging Rig Attachment

  • Double locks design: The locks for both the clamping of your phone and rotation are superb! Clamping lock: you can rotate the steel ring lock making it impossible to remove the phone from the mount. Let you use it absolutely safely.
  • Rotation lock: push the metal lever locks and unlocks the swivel. You can swivel the mount to any angle and with a less than 3 mm motion of this metal lever the swivel is locked in place..
  • Unique cold shoe design: with the Unique design rotating cold shoe mount, you can adjust the angle of the additional microphone or OLED light any degrees at any time you want, no need to remove and reinstall. Patent design.
  • One holder for all: ARNARKOK mobile phone holder adapter has several standard ¼ inch screw attachments, so you can attach your phone to virtually any tripod, monopod, stabilisers and selfie stick with a ¼ inch screw. This is an indispensable device for YouTubers, Vloggers and outdoor photographers..
  • Compatible with iPhone 13/13Pro/13Pro Max/12/12Pro/12Pro Max/11/11Pro/11Pro Max/X/Xs/XR/Xs Max,8/7/6/6s, iPhone 6/6s plus, iphone SE,Samsung Galaxy s10s10 plus S9/S9+,S8/S8+/S7/S6/S6 edge, Note 10 9 8 5 4 3 and many other brands and models.
  • NOTE: Smartphone and LED light are NOT included.
Check Stock

InnoGear Microphone Stand, Boom Scissor Arm Stand Webcam Stand for Microphone Webcam with Mic Shock Mount 3/8\ to 5/8\ Screw Adapter Windscreen Pop Filter Mic Clip Holder Ball Head Phone Holder

  • All-in-One: Package includes all the items you need for studio recording and live sound, microphone stand, phone holder with gooseneck, pop filter, windscreen, shock mount, swivel ball head to attach devices with 1/4 thread and cable ties..
  • Upgraded Boom Arm: Unlike other microphone stands on the market that having knob gets in the way and causes spring deformation. InnoGear arm stand is upgraded with extended structure to fully protect the spring and get out of the way of the adjusting knob, ensuring long lifetime..
  • Hands-free Phone Holder: Free your hands when podcasting or livestreaming. The phone holder is detachable from the gooseneck and easy to manipulate for desired angle. Both the phone holder and gooseneck are adjustable. The sponges and pads on the phone holder will protect your phone from scratches and keep it staying in..
  • Bouncy Windscreen & Free Angle Pop Filter: The high density windscreen protects your mics against wind interference and other noises to achieve clear sound, which fit for microphone with 43-52mm outer diameter. It is thick and soft enough to lower impact force. The 360° adjustable gooseneck is easy to twist in any directions..
  • Strong Compatibility Swivel Ball Head: It is applicable for devices with 1/4 threads, like B....
Check Stock