ReviewsSwivel Trailer Jacks

3/4 Impact Driver Hex Socket Magnetic Nut Driver RV Lift Truck Trailer Stabilizer Leveling Scissor Jack Socket 2pcs

  • ✓ Raise and lower scissors jacks more quickly and easily using power drill torque to raise/lower jacks..
  • ✓ Works on both 19mm or 3/4" Hex Head Scissor Jack RV Trailer Stabilizers..
  • ✓ Reduces time and effort to raise or lower your scissor jacks..
  • ✓ Constructed of heavy duty. 1-year replacement warranty..
Check Stock

CURT 28112 Marine Boat Trailer Jack with 6-Inch Wheel 1,200 lbs 11 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,200 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to....
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with a 6-inch diameter trailer jack wheel.
  • EASY OPERATION. This trailer tongue jack allows for 11 inches of vertical movement and operates using a side-wind handle (12-1/2-inch retracted....
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up....
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a....
Check Stock

Dumble 5th Wheel Tripod Stabilizer Gooseneck Trailer Jack - 5000lb Cap Adjustable RV Jack Stabilizer RV King Pin Tripod

  • ... Heavy Duty RV Stabilizer Jacks will minimize front-to-back and side-to-side motion so you can enjoy your everyday activities discreetly.
  • [Physics At Work]: Align gooseneck camper stabilizer jacks under the king pin of your camper or motorhome to lift the front end of your trailer and adjust the center of gravity.
  • 5,000-pound (2.5ton) weight capacity adds support and enhances stability.
  • [Built to Last]: Steel RV fifth wheel tripod stabilizer jack is powder-coated to resist elements and provide optimal durability.
  • Zinc-plated chain keeps RV stand legs aligned for optimal strength and reliability.
  • [Fits Your Needs]: 4.5-inch (11.4cm) tall cup has a 3-inch (7.6cm) internal diameter to fit the king pin on your travel trailer, camper, boat, and mobile home.
  • Threaded bar makes it easy to adjust the cup height.
  • [Adjust and Store Easily]: King pin 5th wheel stabilizer jacks adjust to heights between 39 and 57 inches (99.1 x 144.8cm).
  • When not in use, adjustable tripod folds to 7-inch (17.8cm) diameter for easy storage.
Check Stock

CURT 28156 Marine Boat Trailer Jack with 6-Inch Wheels, 1,500 lbs. 10-3/8 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This boat trailer jack is rated to support up to 1,500 lbs. trailer tongue weight, and it comes with bolt-on mounting hardware to readily attach to the trailer tongue.
  • CONVENIENT MOBILITY. For easier coupling and positioning of your boat trailer, this jack comes with dual 6-inch diameter trailer jack wheels.
  • EASY OPERATION. This trailer tongue jack allows for 10-3/8 inches of vertical movement and operates using a side-wind handle (12-5/8-inch retracted height, 23-inch extended height).
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a heavy-duty pull pin to securely lock into place.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this marine boat trailer jack is protected in a durable zinc-plated finish.
Check Stock

Boat Trailer Jack,Heavy Duty Trailer Jack with 6 Inch Dual Wheels,1500 lbs Swivel Trailer Tongue Jack,Bolt-on Trailer Jacks,10\ Vertical Travel, Black

  • 【Corrosion Resistant Finish&Bearing Capacity】Boat Trailer Jack body is made of high quality black powder-coat corrosion-resistant steel,Zinc finish on the rest.Overall heavy-duty steel structure, reliable strength, long-lasting corrosion resistance.Features 1500 pound bearing capacity..
  • 【Adjustable Height&Easy to Operate】 This trailer tongue jack allows 10 inches of vertical movement (12.6 inches retracted height, 22.6inches extended height).The ergonomic hand crank handle is easy to grasp and comfortable to hold,which allows you to easily swing jack in place,The height of the whole dual wheel jack will can be stretchable from 24.8inch to 34.8inch..
  • 【Double Wheel Design】 For easier coupling and positioning of your boat trailer,each boat trailer jack is equipped with 6inch diameter double wheel at the base, can rotate 360 degrees,giving your trailer enhanced maneuverability without requiring you to fully lift up the trailer tongue.Compared with most wheels on the market, dual wheel trailer jack wheel replacement is stronger and more stable..
  • 【Swivel Plate & Pull Pin Design】 For increased safety while towing and ease of use, this trailer jack stand is equipped with a swivel bracket,can 360° swivel.the jack swings up and out of the way for....
Check Stock

Camco Patented FasTen Leveling Blocks for RVs, Interlocking RV Leveling Blocks 4 x 2, Pack of 10 (21023)

  • RV Leveling Blocks: These 10 interlocking leveling blocks stack to the desired height for safe and easy leveling.
  • each block measures 17 x 8.5 inches each and adds a full inch to stack height.
  • Incorporated Handle: Camper leveling blocks come with a handle that holds the blocks together by screwing them to the base.
  • helps to carry, keep, and store the trailer leveling blocks.
  • Strong and Durable: Lightweight and durable, these RV levelers are made of UV-stabilized resin designed for years of rugged use.
  • Multiple Uses: RV blocks can be used with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, 5th wheel jacks, and tandem axles.
  • product dimensions are 17 x 8.5 x 1 inches.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

Dumble RV Stabilizer Jacks Camper Leveling Blocks 2-Pack – Heavy Duty Leveling Blocks for Trailer, Camper, Motorhome

  • NO MORE SWAYING: Use the Dumble | Camper Stabilizer RV Leveling Blocks to stabilize, secure, and level your RV, camper, or travel trailer.
  • Transfer weight on a constant vertical plane, support a car in storage to save from a tire going flat, use on trailer with single axle to keep the trailer from tipping back with too much weight in the wrong places, use under weak steps, or place in crawl space to stop floor creaks and rattles.
  • For stabilizing only recreational vehicles – Do not use to raise.
  • FITS YOUR RV & TRAILER: Adjustable from 11.5 inches to 17.5 inches (29.2cm to 44.5cm).
  • Make sure the height is correct for your use.
  • Includes 6.2” x 6.2” x 8.75” inch (15.7cm x 15.7cm x 22.2cm) base and 6” x 8.8” inch (15.2cm x 22.3cm) threaded rod.
  • Rod includes 1.75-inch (4.4cm) diameter slightly dished pad that makes a tight connection under your application.
  • BUILT TO LAST: Each jack supports up to 6,000 pounds (2,722kg) or 3 Tons (2.7MT).
  • All components constructed from aluminum for maximum strength and longevity that resists corrosion.
  • RV levelers nest into each other (stack) for storage.
  • EASY TO USE: The long bolt in the center of the jack stand is threaded.
  • At the top of the jack stand is a large nut that fits into a pocket to keep it from turni....
Check Stock

CURT 28356 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 15 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 15 inches of vertical movement and operates using a top-wind handle (16-1/2-inch retracted height, 31-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock

CURT 23582 Stainless Steel Swivel Trailer Hitch Pin, 5/8-Inch Diameter, Fits 2-Inch Receiver

  • NO CLIP NEEDED. The unique, integrated swivel clip of this hitch pin eliminates the need for a separate hitch clip. There's no risk of losing the clip because it is permanently attached and always right there when you need it.
  • VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches.
  • EASY TO HANDLE. The 105-degree bend in this swivel trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount.
  • NON-CORROSIVE. This tow hitch pin is constructed from stainless steel to ensure dependable strength and long-lasting corrosion resistance in spite of the elements.
  • SIMPLE, SECURE INSTALL. To install this swivel trailer hitch pin, simply insert your ball mount or other hitch accessory into the receiver. With the pin holes in the side of the receiver tube lined up, insert the pin and turn the clip.
Check Stock

CURT 28300 Weld-On Bracket-Style Swivel Trailer Jack, 2,000 lbs. 10-1/2 Inches Vertical Travel

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 2,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10-1/2 inches of vertical movement and operates using a top-wind handle (11-1/2-inch retracted height, 21-1/2-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel bracket for ready welding.
Check Stock

CURT 28354 Weld-On Pipe-Mount Swivel Trailer Jack, 5,000 lbs. 10 Inches Vertical Travel , Black

  • DEPENDABLE STRENGTH. This trailer jack is rated to support up to 5,000 pounds trailer tongue weight.
  • SWIVEL DESIGN. To ensure plenty of clearance while towing your trailer, this trailer jack stand is equipped with a swivel bracket. The jack swings up and out of the way for towing and features a pull pin to securely lock into place.
  • EASY OPERATION. This trailer tongue jack allows for 10 inches of vertical movement and operates using a side-wind handle (10-1/4-inch retracted height, 20-1/4-inch extended height). The integrated grip allows for easy raising and lowering.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat and zinc-plated finish.
  • SECURE INSTALL. This trailer tongue jack is designed to mount onto the trailer frame with a weld-on installation. It comes with a raw steel pipe bracket for ready welding.
Check Stock