ReviewsSynchronous Belt Drive Pulleys

ACDelco GM Original Equipment 12639468 V-Ribbed Serpentine Belt

  • Allows for the operation of various pulleys, and drive belt accessories, with the use of a single belt.
  • Creates a secure point of contact with the pulley, which allows for traction.
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
  • Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type.
  • GM regularly updates production and service part designs to integrate new materials and technologies.
Check Stock

ACDelco GM Original Equipment 12576447 V-Ribbed Serpentine Belt

  • Allows for the operation of various pulleys, and drive belt accessories, with the use of a single belt.
  • Creates a secure point of contact with the pulley, which allows for traction. Material-Reinforced Rubber.
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
  • GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
  • Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type GM regularly updates production and service part designs to integrate new materials and technologies.
Check Stock

ACDelco GM Original Equipment 55578811 V-Ribbed Serpentine Belt , Black

  • Allows for the operation of various pulleys, and drive belt accessories, with the use of a single belt.
  • Creates a secure point of contact with the pulley, which allows for traction.
  • Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
  • Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type.
  • GM regularly updates production and service part designs to integrate new materials and technologies.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Motovecor Go Kart Torque Converter for Predator 212 Clutch Set, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, 3/4' 218353A, (0.75' 10T 40/41)-Upgrade

  • Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware..
  • Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75.
  • Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75.
  • Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end..
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
Check Stock

Genuine Mitsubishi OE UPPER Alternator Belt Tensioner Pulley MD318474 3000GT Diamante 3.0L DOHC & Turbo Engine Compatible with Stealth

  • 3.75" Dia. Add on V-Belt Pulley that mounts on the front of SBF & SBC Water Pump pulleys as an accessory drive.
  • Dual mounting patterns for both Chevy and Ford installation.
  • For Increased Pulley Life/Strength/Appearance.
Check Stock

Lisle 39000 Pulley Puller

  • The unique puller body completely houses the pulley hub to prevent slipping on even the tightest pulleys.
  • Works on traditional V-shaped pulleys and serpentine belt system pulleys.
  • Also works faster than other conventional pulley pullers.
  • Fits most domestic models including GM 3.1 and Quad 4 engines.
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

Imdinnogo 2Kit GT2 Synchronous Pulley Wheel 20&60 Teeth 5mm Bore Aluminum Timing Pulley Belt Closed Timing Belt Length 7.87inch Width 6mm for 3D Printer (60T-5mm-6)

  • Widely used in 3D printer, CNC, milling machine, gear forming machine, drilling machine, CNC machine tool lathe, hobbing machine or other mechanical transmission occasions..
  • Works closely with the synchronous belt for more smoothly transition and more stable drive. Suitable for linear motion and positioning..
  • Inner Bore Diameter: 5mm. Screw Mounting Hole: M4..
  • Material: high quality 7075 aviation aluminum, high hardness, anodized surface treatment, effective waterproof and rustproof, corrosion resistant, more beautiful and durable..
  • Package includes: 2 kt closed belt with pully wheel..
Check Stock

OTC 6613 Variable Pin Spanner Wrench & OTC 7463 Fully Adjustable Gland Nut Wrench

  • Product 1: OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • Product 1: Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
  • Product 1: Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
  • Product 1: Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • Product 2: Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
  • Product 2: Reverses to work on either 7/32 or 1/4 inch pinholes.
  • Product 2: Designed for use with a 1/2 inch drive ratchet or breaker bar.
  • Product 2: High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock