ReviewsSynth Pedals For Guitar

Ex Portable Aluminum Guitar effects Pedalboard With Waterproof Soft Bag, ENO Ex Guitar Effects Pedals Accessories (21" Medium Pedalboard with Bag)

  • SIZE: 20" Medium pedal board and bag kit to put a few pedals, critical pedals on it to organize your studio.
  • Pedalboard: Solid construction, nice black finish, and sturdy rubber feet. Bag: Waterproof delicate Stompbox Bag, enough room to put the pedals and board together.
  • Good choice for beginners and professionals.
Check Stock

Digitech DROP Compact Polyphonic Drop Tune Pitch Shift Pedal with Momentary Latch Switching and True Bypass with Electronic Power Supply and Patch Pedal Cable

  • A polyphonic, multi-mode downward pitch-shifter guitar effect pedal.
  • Foot pedal settings 1-7 provide 1 to 7 semitones of downward pitch shifting. True-bypass switching preserves your tone when the effect is bypassed..
  • Digitech foot pedal has 2 additional settings provide octave down shifting with or without dry signal.
  • Guitar pedals Hold/Tap switch lets you select momentary or latching footswitch operation.
  • Guitar pedals, digitech pedal guitar, digitech foot pedal, foot pedal, guitar pedal, foot controller, guitar effects..
Check Stock

ART CleanBOX II Hum Eliminator 2

  • The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer’s ground, then into a mixer’s power ground..
  • The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit..
  • The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second....
  • The CleanBOX II easily removes ground loops without any signal degradation..
Check Stock

Pedal Board,With Completely Isolated Power Supply ,19*5 Inch 1.8 LB Aluminium Alloy Guitar Pedalboard, Included Carrying Bag , Pedal Cable,Charger,40*1.2 Inch Self Adhesive Hook Loop Tape,Cable Ties

  • ISOLATED POWER SUPPLY:The pedal board is equipped with a completely isolated power supply, which is more convenient to use, eliminating the trouble of carrying an additional power supply,Just need to connect the pedalboard and pedals..
  • INDEPENDENT SHORT CIRCUIT PROTECTION:includes 7 ways 9V 200mA, 1 way 12V 200mA, 1 way 18V 200mA, 1 way USB 5V 500mA.One output is short-circuited, other outputs can still work.The guitar pedals board power supply has a noise reduction function and direct current increases the stability during use..
  • ALUMINIUM ALLOY MATERIAL:High-strength aluminum alloy integrated die-casting guitar effects pedal board,which is solid to hold and protect the pedals nicely and durable to use..
  • PERFECT DETAILS DESIGN:Slight incline design more comfortable for you to step pedals on the board and the frosted surface offers no worries for scratches.Rubber feet make the pedal is quite stable..
  • ALL IN SUITE ACCESSORIES:The whole piece of customized hook surface velcro and professional grade adhesive backed hook-and-loop for securing pedals. Coming with pedalboard carrying bag , guitar pedal cable,Charger,40*1.2 Inch self adhesive hook loop tape,cable ties.
Check Stock

On-Stage KSA8585 Keyboard Accessory Tray

  • Tray inserts into any 1" round or square tubing.
  • Accommodates small mixers, drum machines, synth modules, effect pedals, small speakers, and more.
  • Can be used on single and 2-tier keyboard stands.
  • Posi-lok mechanism allows for precise, locking angle adjustments.
  • Includes hook & loop to securely fasten your gear.
Check Stock

9V 1500mA Power Adapter for Donner DPA-1 Guitar Pedal Supply Tip Negative with 5 Way Daisy Chain Cables

  • Input: worldwide 100-240 VAC 50/60Hz, output: 9volt 1.5amp, MaxRated Power: 13.5 Watts, DC Plug Size:5.5×2.1mm Inner Negative(-). No interference & noise, 6.6ft Long cord,.
  • For Guitar Pedals - Our 5 way pedal power supply adapter for use with electric guitar multiple effect pedals. Package includes one 9v power adapter and 5 way daisy chain cord. Splitter - High quality copper core daisy chain cable. The professional noise isolation performance ensures you a quiet pedal chain condition while play..
  • 5 WAY - 5 way power chain cables are specially designed for guitar players who want to power several pedals at the same time with only one adaptor or outlet from power supply..
  • Fit for stompboxes and negative tip keyboards/electronics that have the same voltage requirements. It is compatible with most effects pedals models from BOSS, Behringer, DigiTech, Jim Dunlop, MXR, Nobels, NUX, Roland, TC Electronic, Xotic, and Zoom. Note: It is NOT compatible with Casio CTK-5000..
  • Stably safely Continuously input and output for your device. Please make sure the parameter is compatible with your devices If you have any problem after receive this item, please don't hesitate to contact us, we will try our best to resolve all issues,provide you with all after-sales service....
Check Stock

9V DC 1.7A 1700mA Center Negative Regulated Power Supply Adapter with Noise Reduction Filtering for 9 volt Guitar Effects Pedals + 5 Way Daisy Chain

  • [HIGHEST POWERED REGULATED 9V GUITAR PEDAL POWER SUPPLY AVAILABLE] - 9V DC, 1700mA 1.7A regulated output. Truly the highest powered 9V power supply on....
  • [FITS INDUSTRY STANDARD GUITAR PEDALS] - tip/center-negative, 5.5 mm O.D, 2.1 mm I.D., 9.5 mm L barrel connector. Whether you need power for a....
  • [EXTENDED LENGTH CABLE] - 6.5 foot 22 AWG cable. No more extension cords and messy stages. One 9V 1700mA power supply with 6.5' length will work for....
  • [POWER MULTIPLE PEDALS] - with the optional 5 way daisy chain power supply you can safely and quietly power up to 5 of your favorite 9v pedals at....
  • [ULTRA LOW NOISE] - ferrite magnetic ring significantly reduces noise caused by facility power constraints. Coda Music Technologies guitar pedal power....
Check Stock

GOKKO Small Guitar Pedal Board 15.7 x 4.9 inch Pedalboard with Carrying Bag

  • Small guitar effects pedal board which has been designed to mount 6 mini effect pedals or 5 standard pedals..
  • Made of aviation grade material aluminum alloy, 4 foot pads separate the pedal board from the ground to avoid scratches..
  • The mini guitar pedalboard comes in it's own carrying bag.The package also includes Velcro tape for easy attachment of the effect pedals..
  • Pedal board dimensions: 15.7 x 4.9 x 1.2 inches / 40 x 12.5 x 3 cm, super light,about 0.7kg / 1.5lb..
  • Package including：pedal board X 1，carrying bag X 1，2 pairs mounting tape..
Check Stock

Pedalboard, Metal Guitar Effects Pedal Board 17.3\x11.8\

  • Removable Guitar Pedalboard: Detachable into two separate guitar Pedalboard design adjusts to accommodate your pedal needs. Easy to Carry.
  • Dimensions before disassembly: 17.3" x 11.8" x 3.8". Disassembled size: 8.7" x 11.8" x 3.8".
  • Note: No screwdriver. Made of solid wood & metal material to hold and protect the pedals nicely and durable to use..
  • Eliminate Tangling Cables: Innovative cable management design eliminates mess and tangling. Cables stay secure, neatly out of sight, but adjustments can be made quick..
  • With Abundant and practical accessories: Guitar Cable, cable ties, pedal switch topper to protect your foot switch, Velcro necessary to fit your pedals and power..
Check Stock

Amazon Basics 1/4 Inch Guitar Patch Cable - 6 Inch

  • works with all effects pedals, including guitar and bass pedals.
  • 1/4-inch right-angle-to-right-angle connectors allow for close placement of pedal effects on pedalboards.
  • Oxygen-free copper (OFC) spiral shield and conductive PVC shield to block interference from outside sources.
  • Full metal casing ensures reliable strength and durable long-lasting performance.
  • Backed by an Amazon Basics 1-Year Limited Warranty.
Check Stock

Donner Pedalboard Pedal Tape，Guitar Pedal Board Mounting Tape Length 2M Width 5CM Hook + Loop

  • SIZE：The Pedal board Trap Length 2m (78”),Width 50mm(2”).
  • STRONG ADHESIVE ABILITY：The back glue is made of strong adhesive ability glue.Strong adhesive ability to keep your guitar pedals on your pedalboard....
  • LASTING STICKINESS：You never have to worry about your pedals falling off or the tap adhesive melting off..
  • SIMPLY DIY：Simply cut to the length of your pedals, adhere to the back, and mount to your pedal board..
  • NOT EASY TO REMAIN：It’s not easy to remove any residue from the guitar effect, so you can protect your effect..
Check Stock