ReviewsT Type End Mills

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

...free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs..
【WIDE APPLICATION】This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you..

Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
Used for slotting and peripheral milling.

Check Stock

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
General purpose end mill for working on all types of materials.
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

Les Mills™ SMARTSTEP™ Dual Purpose Cardio and Strength Platform System

The athletic step and cardio platform engineered for Les Mills..
The Les Mills SMARTSTEP features four red risers (two each side). When two risers are locked into each side of the platform the complete unit has a height of 7.8 inches. Non-slip rubber feet hold the step firm on indoor flooring, without scratching. Rubber feet improve shock absorption and reduce strain on joints..
LOCKING SYSTEM + STORAGE: Riser lock-down system means the Les Mills SMARTSTEP is easy to put together before exercise. The lock-down system and circular riser design work together to keep the platform stable, even during intense cardio training. So you don’t have to worry about the platform falling off the risers during exercise..
CONSTRUCTION + WARRANTY: Manufactured by injection molding for high precision and strength using engineering plastics. The Les Mills SMARTSTEP platform and risers are life tested for a 300lb person in a high use, gym environment..
Backed by 2-year manufacturer’s warranty..

Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

BAL 20032 Hex Head Crank Handle

For "T' type and Telescopic stabilizing jacks..
T 8820 type and Telescopic stabilizing jacks.

Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
Long service life, Decreasing the times of changing cutters,Saving production time.
Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.

Check Stock

Hot Favorable T-Track Hold Down Clamps,6-3/8

1-YEAR WARRANTY - We, as the seller & brand owner - Hot Favorable, provide exclusive extended warranty for our Hold Down Clamps. If you have any problem with your purchase throughout one year, please let us know. We will solve it as soon as possible by all means..
STURDY COMMERCIAL QUALITY - Constructed of High Strength Aluminum Alloy 6063 for durability and wear resistance..
PRODUC SIZE - Each clamps size is 6-3/8"L x 1-1/4" Width x 3-19/32" H..
FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies. Heavy-duty rubber pads on each end of the clamp bars to prevent slipping and any potential damage to a workpiece..
MULTIFUNCTION : Our Hold Down Clamp Set is great for use with routers, drill presses, CNC, table saws, jigs, panels, vertical mills and more..

Check Stock