ReviewsT bolt Superior Clamp

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 48, fit 2-1/8\ ID Hose, Range: 2.38\ - 2.68\ (316-SSTC-60-68)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 2. 38" - 2. 68" (60mm-68mm). SAE # 48..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

Rustark 55Pcs Spring Band Type Action Fuel Line Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamps Fasteners Assortment Kit (5 x 7mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm)

  • Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • The band of stainless steel t-bolt clamps are 0.6mm thick, and 19mm width rounded edge, which won’t damage the hose or pipes..
  • T-Bolt Clamp effective range: 45 millimeter-105 millimeter can adjustable (1.75 inch-3.75 inch)..
  • Superior welded construction, Floating bridge liner..
  • Note: If used this t-bolt hose clamps for industrial and military hose or pipes, please measure the outside diameter of them before purchase..
Check Stock

Rockler T Track Inline Cam Clamp – Mini Cam Clamp - T Track Clamp for T-Track Stops – Rubber Small Clamps for Marring or Slippage - T-Track Accessories

  • T-Track Inline Cam Clamp: Just slide these mini clamps into your T-track and pull the lever to secure your work in the position. Use these mini heavy duty clamps with any T-track that accepts 5/16” T-bolts..
  • Little Cam Clamps: When paired with a T-track table and one or more of our optional T-Track Stops (#50603, sold separately), this cam clamp provides just enough pressure to keep your work in place as you machine the unobstructed surface..
  • High Quality: The strip of rubber on the mini clamp face helps to reduce the chance of marring or slippage. The T track clamps bottom is also faced with rubber and features an inline keyed slot that locks into the T-track for further stability..
  • What’s Include: Use our cam clamps with any T-track that accepts 5/16'' T-bolts, including our optional T-Track Table and many CNC tables..
  • Low Profile Clamp: Thanks to the low profile clamp face (only 5/8'' high), you can easily sand without hitting the clamp..
Check Stock

AKIHISA T-Bolt Hose Clamps,304 Stainless Steel Heavy Duty Adjustable Tube Clamps (23-25mm 4pack)

  • [Clamps Size] T bolt clamp adjustable work range 0.9-0.98" (23mm to 25mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide varie....
Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

  • Finally, a quick release clamping system for jigs, fixtures and fences. Spending a lot of time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can ex....
Check Stock

AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch

  • [Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

10X 2 Inch 57mm - 65mm Stainless Steel T-Bolt Clamps Turbo Intake Intercooler Clamp (10Pcs 2 inch)

  • ▶Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • ▶These high quality T-bolt clamps offer high tensile strength, durability and corrosion resistance..
  • ▶Universal application,Perfect for DIY Turbo, Intercooler, Intake, Turbo Charger Projects.
  • ▶Clamp Range: 57 mm-65 mm or 2.24"-2.56".
  • ▶This T-Bolt Clamp fits for 2" or 51 mm inner diameter silicone hose fit for 2.4" or 61 mm outer diameter silicone hose..
Check Stock

Jersvimc 2Pcs 3 Inch T-Bolt Hose Clamps for Range 83-91mm, Stainless Steel T Clamp Adjustable Turbo Clamps Intercooler Hose Clamp for 3\ ID

  • 1️⃣[ What You Get ]: 2 x t-bolt hose clamp. It is suitable for pipe inner diameter of 3 inch / 76.2mm. The working range of the clamp is 3.27-3.58 inch (83-91mm). In order to ensure a pleasant shopping experience, please take a good measurement before buying to ensure the right size..
  • 2️⃣[ High-quality Material ]: The T Bolt Clamp is made of high-quality 304 stainless steel, which has more advantages than 201 stainless steel on the market. It has anti-rust, anti-corrosion, strong and wear-resistant properties, will not break even if used for a long time, and has a long life..
  • 3️⃣[ Advance Design ]: The t-clamp adopts a design with edges, and the smooth surface can protect the hose material from damage. The design of the self-locking nut prevents loosening during clamping, and has strong torsion resistance and can be disassembled and installed at any time..
  • 4️⃣[ Multi-purpose ]: The stainless steel t-bolt hose clamp is very practical, beautiful in surface, and extremely cost-effective, so it is widely used in a variety of scenarios. For example, Turbo, air intake system, piping items, intercooler, radiator hose, turbocharger and so on..
  • 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience t....
Check Stock

Squirrelly 4 Inch Heavy Duty Stainless Steel with Rounded Band Edges T-Bolt Clamp Turbo Intake Soft Hose Intercooler

  • Tired of your intercooler piping blowing off? Upgrade to these Heavy Duty Stainless Steel T-bolt Clamps and leave those old worm clamps in the dust..
  • Our T Bolt clamps are made from heavy duty 304 stainless steel with rounded band edges to protect soft hose materials from cuts..
  • These high quality T-Bolt Band Clamps provide high tensile strength, durability, and are corrosion resistance..
  • Clamp sizing: 104mm-112mm // 4.09" - 4.40". Fits 4" outside diameter..
Check Stock

Kit For Build Woodworking Jigs Fixtures Tabletop | For Cutting Routing Drilling Sanding Assembling | Inline Track Clamps | Dovetail Aluminum Tracks | T-Track Accessories | T-bolts Star Knobs FullKit

  • VERSATILE - build versatile jigs, fixtures, or hold-downs, create your own clamping jigs and fixtures, such as drill press table, bench vise, corner clamp, fence clamp and more of new clamping solutions.
  • REFRESH- use our system alongside your T-track system, Ike with T tracks woodworking (T track rail or t track clamps), this kit includes all the parts to design and build any camping jigs just the way you want.
  • COMPETIBILITY- our dovetail tracks can accept t track accessories (t track clamp, like t track hold down clamp, t track stop) that uses standard 5/16'' t bolts.
  • INNOVATIVE- Revolutionary all-in-one kit includes -30⁰ dovetail aluminum tracks, T track accessories (T bolts, star knobs), inline auto-adjust clamps (dovetail clamps) and self-adhesive measuring tape. The perfect kit for woodworking as a hobby or pro.
  • HIGHLY EFFICIENT- 18’’/450mm long track and clamping capacity of the inline clamps (dovetail clamps) up to 125Lb is more than enough for your projects. The auto adjust clamps slides into dovetail sturdy aluminum tracks for fast and easy clamping. This carpentry kit will turn your woodworking projects from a headache to an enjoyable experience, while saving you time and effort!.
Check Stock