ReviewsT shaped Bolt

GANOPPER 38T Single Speed Crankset for MTB Crank Arm Set 170mm with Mountain Bike 68mm Bottom Bracket

Material: Alloy 6061 MTB Bike Crank .7075 Alloy Aluminum 38T Narrow Wide Chain ring,rainbow plating chainring bolts.
Chain Ring Size: 38T,Shape:Crown. Chainring Weight: 71.5g(0.15 lbs) ,Fit for 9 Speed,10 Speed,11 Speed Mountain Bike crank set,Easy to refit 30T,32T,34T 1x MTB Crankset , Road Bike Crank Set etc.,.
PCD: 104 BCD .Crank Arm Length: 170mm .Color: Matte Black . Compatible with 9/16 inch pedals.
Bottom Bracket: Cups-1.37*24T/68mm~73mm,Compatible with: Shimano, FSA, Gaint ATX770 ATX770-D XTC 750 etc.,.
Package Includes:1 x one fordged crank Arm set,1 x Hollowtech 2 Bottom Bracket,1 x 38T Single Chainring,4 x Chainring bolts(set),1 x M18 crank screw,1 x Crankset bolt Allen Wrench.

Check Stock

uxcell M8x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 8pcs

Head Size: 10 x 6 x 3mm/0.39" x 0.24" x 0.1"(L*W*T).
Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..

Check Stock

uxcell M8x25mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 10pcs

Head Size: 18 x 8 x 5mm/0.71" x 0.31" x 0.2"(L*W*T).
Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..

Check Stock

uxcell M8x30mm T-Slot Drop-in Stud Sliding Bolt Screw Carbon Steel for 40 Series Aluminum Profile 5pcs

Head Size: 19 x 8.5 x 5.5mm/0.75" x 0.33" x 0.22"(L*W*T).
Advantage: Carbon steel T screw bolt screws nuts surface chrome finish, quenching and tempering heat treatment, not easy corrosion, and high-hardness..
Application: Used widely for aluminum alloy, rack assembly and clamping lock, used with T-nuts, good fastening effect..
Notice: When purchasing, please confirm the size of your aluminum profile or T-groove to ensure that it matches the size of our T-bolt..

Check Stock

Rustark 55Pcs Spring Band Type Action Fuel Line Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamps Fasteners Assortment Kit (5 x 7mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm)

Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
The band of stainless steel t-bolt clamps are 0.6mm thick, and 19mm width rounded edge, which won’t damage the hose or pipes..
T-Bolt Clamp effective range: 45 millimeter-105 millimeter can adjustable (1.75 inch-3.75 inch)..
Superior welded construction, Floating bridge liner..
Note: If used this t-bolt hose clamps for industrial and military hose or pipes, please measure the outside diameter of them before purchase..

Check Stock

Vera Bradley Keychain, Ginger Snap

Made in the USA with globally sourced materials and lasts up to 10x longer.
High quality import designed by the company that invented the original key security device.
Strong nickel plated bolt snap attached to 1 inch (2.5 cm) leather split ring holder.
Bolt snap allows keys to be removed easily, measures 5 inches (12.7 cm).
Nickel plated tempered steel 1.25 inch (3.2 cm) split-ring returns to original shape after expansion.

Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
Bolts and washers are 5/16”-18 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BUILT TO LAST: T knobs package includes ....

Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
Bolts and washers are 1/4”-20 x 1-1/2-inch.
Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
BUILT TO LAST: T knobs package includ....

Check Stock

Solary Magnetic Induction Heater Tool, 1000W 110V Hand-hled Flameless Electromagnetic Induction Heater Kit with 12 Coils, Rusty Bolt Removal Tool

...be removed quickly. No open flame cause by the heating, to ensure your working environment in safe..
【With 12 Coils And Tool Box】Our induction bolt removal tool comes with 12 coils: 1 x 20mm coils.
1 x 1000mm coil. And it is also equipped with a blue aluminum alloy tool box, which can help you store tools neatly, keep your studio tidy, and is easy for you to carry out for work..
【Design】Our induction heating machine with LED light, can light up work area to provide clearly view even in dark environment. Can more clear understanding of the work progress, and know the status of heated objects..
【Overheating Protection System】Our induction heating tool is equipped with a cooling fan at the end, which can fully dissipate heat.
the built-in overheating protection system will stop working when the machine temperature is too high, avoiding machine overheating damage and protecting your work safety. When the machine temperature returns to normal, you can continue to work, you don't have to worry about it..

Check Stock

absoluteBLACK Shimano Oval Traction Chainring Black/96 BCD (M8000 XT), 30t

Connection: 4-bolt, M8 regular "double" bolts.
Compatible Components: Shimano M8000 XT, Shimano M9000 XTR.

Check Stock

absoluteBLACK Shimano Oval Traction Chainring Black/96 BCD (M8000 XT), 32t

Connection: 4-bolt, M8 regular "double" bolts.
Compatible Components: Shimano M8000 XT, Shimano M9000 XTR.

Check Stock