ReviewsT8 Electronic Ballasts

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 3000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 4000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

GE Lighting 96720 GE232-MVPS-L 120/277-Volt UltraStart Electronic Fluorescent T8 Programmed Rapid Start Ballast 2 or 1 F32T8 Lamps

  • Programmed Rapid Start T8 Ballast will accept up to 2 or 1 F32T8 lamps.
  • Accommodates multi-voltages from 120 to 277-volts, extra versatile for your unique projects.
  • Extends lamp life in frequently switched applications, more than 100,000 on/off cycles.
  • Ultra-efficient programmed start ballasts with more than 90-Percent efficiency.
  • Mounting dimensions: 8.9-Inch L x 1.1-Inch W, Mounting slot set 0.3-Inch apart.
Check Stock

Philips 479634 - F32T8/TL950/ALTO 32 Watt - T8-36,000 Hours - 2600 Lumens - 5000K Full Spectrum - 900 Series Phosphors - Case of 30

  • Pack of 6, T8 High Performance Straight fluorescent light bulb, 17-Watt, Medium Bi-Pin Base.
  • ROHS Compliant, can be used on both instant and rapid start ballasts, providing continuous beautiful light from end to end with no dark spots.
  • Cool White 4100K, CRI 83 and an average life of 20,000 hours, Ideal for both indoor and outdoor use.
  • T8 fluorescent tubes provide high light output and long life, making them perfect for commercial and industrial applications.
  • High Efficiency 1400 lumens providing an industry-high light.
Check Stock

Keystone KTEB-120-1-TP-EMI Fluorescent Ballast 1-Lamp F20T12 20W T12 120V

  • F20T8, F20T12, F18T8, F17T8, F15T8, F15T12, F14T8 or F14T12.
  • Keystone KTEB-120-1-TP-EMI electronic rapid start T12/T8 ballast..
Check Stock

Yescom 1000W HPS MH Electronic Dimmable Ballast for Grow Light Bulb Lamp w/Cooling Fan

  • [Compatibility]: 14 3/16" x 4 5/16" x 2 15/16" 1000W electronic ballast is designed for connecting with HPS & MH grow light to maintain the working....
  • [Powerful Performance]: Ballast features power output options of 600W,750W,1000W and Super Lumens for ass the light to adjust brightness and create....
  • [High Efficiency & Stable]: Compared with magnetic ballasts, electronic ballasts feature energy-saving design to reduce input power more than 10% and....
  • [Durable & Cooling Design]: Strong aluminum construction for providing sturdiness, rust & corrosion resistance, can be used for a long time.
  • [Safe Protection]: Overheating protection for stopping working when the operation temperature reaches to the maximum value, open/short circuit....
Check Stock

Dimmable LED Edison Light Bulb, G25 (G80) Globe Bulb, 60W Equivalent, 5000K Daylight, Christmas Light, E26 Standard Base, UL Listed, 6-Pack

  • Directly relamp and replace the 85 watt fluorescent bulb F72T12/HO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • All plastic diffuser for better light distribution, less spot reflections. O Rings to waterproof rotating caps and sealed diffuser for indoor and outdoor applications.
  • Energy saving of 51% from 85 watts to 42 watts with 4620 lumens output (S), Energy saving of 36% from 85 watts to 54 watts with 5940 lumens output (D).
  • T12 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

KTEB-432RIS-1-TP-SL 4 Lamp F32T8 120V Electronic Ballast

  • DESIGN: Quick Disconnect harness for easy replacement in the field.
  • COMPATIBILITY: For use with linear T5/T8 and 4-pin compact fluorescent lamps using instant start, rapid start, and slimline ballasts.
  • RATINGS: UL listed. 0° - 50°C (32° - 122°F). Meets UL 924, NFPA 101 (current Life Safety Code), NEC and OSHA illumination standards.
  • VOLTAGE: Multi-voltage input capability (120V-277V.
Check Stock

GE Lighting 72277 GE232MV-N-DIY LFL ProLine Electronic Multivolt Instant Start Ballast for 2 or 1- F32T8

  • Mount length: (M) 8.9-Inch / Mount width: (X or F) 1.1-Inch / Mount slots: (MS) 0.3-Inch.
  • GE's ballasts are among the highest energy-efficient ballasts available.
  • Ballast factor: Normal, lamp wiring: Parallel.
Check Stock

DC 0/1-10V Knob LED Dimmer, Mini Controller Rotary Switch Low Voltage Passive Dimmer PWM Dimming for 0-10V or 1-10V Dimmable Electronic LED Driver, 2packs

  • Outstanding Features - 0-10v dimmer are used to control various dimmable LED drivers and dimmable electronic ballasts with 0/1-10V dimming signal. The dimming range is 0-100%, which can fully realize 0 V dimming, and can realize the shutdown function with the set 1-10V power supply..
  • Switch Specifications - Effective dimming signal current: ≤ 40mA.
  • working temperature: -15-50, triode withstand voltage 180V..
  • Dimensions and Height - The rgb controller size is 36*23*36mm (plus the twist height), the wire is 0.75*2 national standard wire, the wire diameter is 0.6, the wire length is 35CM, the brown is the positive electrode, and the blue is the negative electrode..
  • Wide Range of Applications - The dimmer knob can be widely used in downlights, track lights, wall washers, grow lights, electronic LED drivers, electronic ballasts, etc. It is compatible with most LED drivers..
  • Tips - It is forbidden to place the drive in a place with direct heat source, and it needs to be placed in a well-ventilated place.
  • if the drive is built-in, sufficient ventilation must be ensured to dissipate heat..
Check Stock

TOPGREENER Occupancy Vacancy PIR Motion Sensor with 0-10V Dimmer Light Switch, 800W Electronic Ballast or LED Driver, Single Pole Low-Voltage Dimmer, TDODS5-010, White

  • Motion sensor switch with low voltage 0-10 dimming, designed to control electronic ballasts or dimmable LED drivers, it allows you to dim the brightness levels of low voltage lighting.
  • Motion detection: Passive infrared (PIR) sensor reduces false triggers from unwanted movements and turns lights on when motion is detected. Lights will automatically turn off when the selected time delay expires.
  • Dimmer gradually brightens and fades lights by holding the top or bottom buttons.
  • lights turn on to last used brightness level.
  • Adjustable: Variable time delay from 15 sec (Test) to 30 min, detection range, ambient light level.
  • Specifications: For use with dimmable electronic fluorescent ballasts or dimmable LED drivers ONLY, neutral wire required, 120-277VAC, 800W max, 1200 sq ft coverage area, single-pole, wall plate not included, UL listed.
Check Stock