ReviewsT8 Lighting Fixtures

Lithonia Lighting L48 3000LM RDL MVOLT 40K 80CRI WH CLX LED 48 Inch Strip Light 3000 Lumens Lens 4000K 22W Round Diffuser

Round lens LED strip light provides 3000 lumens in a very low profile, simple to install design that is perfect for industrial and Warehouse....
Replaces 2-lamp 17W T8 fluorescent Fixtures and provides more light with a fraction of the energy costs. It was designed as a cost effective option....
LED strip provides end to end illumination so that when linked together there are no Dark spots.Rated for up to 40 degrees C/104 degrees F so that the....
Clx LED strips are replacing the popular Lithonia Lighting z strip family. Clx offer better light, efficiency, functionality and appearance.
100, 000 hours of light: made from high quality materials, these LED lights are designed to provide Lighting that lasts for up to 100, 000 hours of....

Check Stock

Led Cooler Light 6ft,V Shape Integrated LED Fixtures 56W,5600LM, AC85-277V, SMD2835 Clear Cover, Cool White 6000K. led Shop Light 25 Pack

Stocked in the USA, usually arrives within 3-8days.
T8 integrated V-shape tube ,Cooler door lighting 270 degree glowing .so no need to use existing light fixtures..
Dual row V-shaped led light bulb gives 270° lighting with no wasted light. Brighten your world.The installation kits are included in each individual light box!.
Save 62% instantly- Save 62% on your electricity bill! Replace 120W fluorescent tubes with 56W LED Led Tube Light.
This LED light has its own integrated fixture, so you do not need to have an existing fixture or to modify a fixture since this light has its own built in fixture and mounts..

Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..

Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..

Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 3000K

...ights may be used with your existing shunted or non-shunted tombstones, we highly recommend replacing aging tombstones with new ones to avoid potential arcing and overheating..
BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..

Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

...ights may be used with your existing shunted or non-shunted tombstones, we highly recommend replacing aging tombstones with new ones to avoid potential arcing and overheating..
BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..

Check Stock

Sunlite F32T8/SP841 32-Watt T8 Linear Fluorescent Light Bulb Medium Bi Pin Base, 4100K, 30-Pack

G13 Medium Bipin, 48" long, Good Efficiency 75% less energy than incandescent, CRI 75.
3250 Lumens More than 100++ lumens/watt (efficacy) Bulb Meets Federal Minimum efficiency Standards.
Environmental responsibility low mercury meets TCLP requirements, Brand Cross Reference F32T8/741/ECO-F32T8/SP41/ECO-F32T8/TL741/ALTO-FO32/741/ECO.
Works with INSTANT / RAPID Start Fixtures, Long Life: 20,000 hour ,Bulbs sleeved safe wile shipping.
Energy efficient, high energy savings in an environmentally responsible lamp.

Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..

Check Stock

Luxrite 12-Pack 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC

...ext 45 years, based on 3 hrs/day use. Each t8 LED bulbs 4 foot has a frosted cover and is shatterproof which allows for safer installation compared to glass fluorescent lights. Use these in your shop, garage, workshop, office, basement, indoor, outdoor, or anywhere in your home requiring t8 LED lamps..
RELIABLE LIGHTING - Zero flickering light, zero delay, and zero worries with 4' tube light bulbs that provide high quality indoor and outdoor lighting. Each LED tube lights is quick to install, has a 3cct tunable switch, damp location rated, comes UL listed and UL classified for your safety, DLC listed for reliability, works in direct wire ballast bypass single or double end installations, existing ballast fixtures, is g13 2-pin base, and backed by a 5 YEAR WARRANTY..

Check Stock

LUXRITE 4FT T8 LED Tube Light, Type A+B, 18W=32W, 3 Colors 3500K | 4000K | 5000K, Single and Double End Powered, Plug and Play or Ballast Bypass, 2340 Lumens, F32T8, Frosted Cover, UL, DLC (4 Pack)

...ext 45 years, based on 3 hrs/day use. Each t8 LED bulbs 4 foot has a frosted cover and is shatterproof which allows for safer installation compared to glass fluorescent lights. Use these in your shop, garage, workshop, office, basement, indoor, outdoor, or anywhere in your home requiring t8 LED lamps..
RELIABLE LIGHTING - Zero flickering light, zero delay, and zero worries with 4' tube light bulbs that provide high quality indoor and outdoor lighting. Each LED tube lights is quick to install, has a 3cct tunable switch, damp location rated, comes UL listed and UL classified for your safety, DLC listed for reliability, works in direct wire ballast bypass single or double end installations, existing ballast fixtures, is g13 2-pin base, and backed by a 5 YEAR WARRANTY..

Check Stock

Hyperikon T8 T10 T12 8ft LED Tube Light, 36W (75W Equiv.), Dual-End Powered, Ballast Bypass, Shatterproof, Fluorescent Replacement, 4000k, Frosted, 4200 Lumens, Workshop, Warehouse, Garage - 12 Pack

✔ BRIGHT, HIGH OUTPUT LED – Illuminate your space with 4000+ lumens! See things in a new light when you replace old fluorescent tubes with super bright, high output 8ft LED tubes..
✔ LONG-LASTING TUBES – Our shatterproof 8ft LED tube lights have an outstanding life rating of 45,000+ hours! These tubes can last 20+ years depending on use, eliminating maintenance costs and reducing relamp frequency..
✔ EASY BALLAST BYPASS INSTALL – Hyperikon 8ft LED tube lights are dual-end powered and require a simple, energy-saving, ballast bypass (direct wire) installation. Refer to our installation guide for details..
✔ FLUORESCENT TUBE REPLACEMENT – Hyperikon LED tubes are ideal for 8ft fluorescent replacements. They are compatible with existing T8, T10, and T12 fluorescent fixtures, making LED conversion easier than ever. Retrofit your garage, warehouse, and more..
✔ BEST-IN CLASS-WARRANTY – Hyperikon’s hassle-free UNLIMITED 5 Year Warranty is unrivaled in the commercial lighting industry and covers all of our T8 8ft LED tubes. Contact our customer service team 24/7!.

Check Stock