ReviewsTable Mount Clamps

(100 Of Pack) White 9mm Cable Tie Mount Base Saddle Type Mount Screw Wire Bundle Base Holder Width Cable Large Size 0.75 inch

  • These cable tie mounts are a black color that can be easily concealed for a neat appearance..
  • Secures with a single screw providing quick installation..
  • Dimension : 23 x 16 x 9mm / 0.9" x 0.6" x 0.4" (L*W*H) , Screw Hole : 5mm/ 0.2".
  • Our plastic cable tie mounts can be used with wire management clips, electronic cord organizer, throttle cable clamps, marine cable clamps, stainless steel cable clamps, or anywhere clean looking wiring is needed!.
  • Package : 100 pcs Cable Tie Mounts Base (White Tie Mount Hole Width : 9mm / 0.35" ).
Check Stock

EVERIE Sous Vide Container 12 Quart with Collapsible Hinged Lid for Chefsteps Joule Sous Vide Immersion Circulator Cooker (Side Mount)

  • Everie Sous Vide Bundle – 12 Quart container NSF approved and lid with side mount hole to snugly mount Chefsteps Joule cooker to the container. Does not fit Anova or other brands sous vide cookers. Hole diameter 48mm/1.89″.
  • Minimum Water Evaporation – Cook long time even over night without having to refill water..
  • Collapsible Lid – The hinge is close to the machine giving enough space to check or refill or remove ingredients any time. Please check the image of the notice of installation to make sure the lid fits..
  • No Clamps Required – The lid fits to the container snugly to clamps the sealed bags to stop it from swimming in the bath, no additional clamps required..
Check Stock

BIWIST Under Desk Cable Management Tray, Metal No Drill Under Desk Cord Management with Clamp, Wire Organizer Under Desk, Under Table Cable Management Rack, Fits Most Desk.

  • NO DRILLING FOR INSTALLATION: BIWIST Under Desk Cable Management Tray Uses Clamps To Mount On The Table, No Holes To Punch, No Screws To Screw, And Won't Be Ruining Your Table. No Stickers Are Required And No Marks Will Be Left Behind. Simple And Easy To Unify The Messy Wires Under The Table Neatly..
  • LARGE CAPACITY: BIWIST Cable Management Tray Under Desk Widens To 7 Inches, Compared To Others' 4-5 Inches. Our Under Desk Cable Management Holder Can Accommodate More Cables And Plugs, Which Facilitates The Alignment And Heat Dissipation Between Cables..
  • STURDY AND DURABLE：Our Under Table Cord Management Storage Holder Trays Are Made Of High Quality Carbon Steel And Are Very Strong And Durable. The High Quality Paint Coating Is Also Excellent In Rust Prevention And Insulation Insulation..
  • FREE UP YOUR UNDER-DESK SPACE：Under Table Cable Management Tray Can Store Messy Wires And Randomly Placed Plugs, Which Can Eliminate The Appearance Of Overheated Wires And Short Circuits, While Also Freeing Up Your Under-Table Space And Making The Floor More Neat And Nice..
Check Stock

Forever Mod by Various Artists (1997-10-22)

  • The sim racing shifter for G29 and G920 Driving Force Racing Wheels: Adds realistic shifting to your racing rig.
  • Built to last: Durable solid steel gear shifter and hand stitched leather boot and knob cover and six speeds with push down reverse gear.
  • Six speed shifter and push down reverse: “H” pattern gear box for fast, smooth shifting. System Requirements Logitech G29 or G920 Driving Force Racing Wheel. Games that support Logitech Driving Force Shifter (not compatible with Playstation 3). Weight without cable 1.59 pounds. Weight with cable 1.66 pounds.
  • Secure mounting: Built in clamps mount shifter securely to a table or racing rig. Connection Type: Shifter connection DB9 (female).
  • Compatible with PlayStation 4, Xbox One, Windows 8.1, Windows 8, or Windows 7, games that support Logitech force feedback racing wheel.
Check Stock

Movo 4-Pack Universal XLR Condenser Microphone Podcast Equipment Bundle for 4 - Includes Cardioid Mics, Desk Mount Stands, Shock Mounts, Pop Filters, and Audio Cables - Great for Zoom, Music, YouTube

  • TEAM ESSENTIALS: Podcast equipment kit includes 4 cardioid polar pattern condenser microphones. Each mic comes with a 30" articulating desk mount scissor arm mic stand, shock mount, cables, and dual layer nylon mesh pop filter.
  • BROADCAST-QUALITY AUDIO: Versatile cardioid condenser microphone records 48kHz/16 bit broadcast quality sound resolution with no latency, and features a powerful frequency response of 20Hz to 20kHz.
  • 1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support team is here to help.
  • CABLES INCLUDED: Condenser microphone bundle includes XLR-to-3.5mm and XLR-to-XLR connectors to meet your audio needs.
  • CREATE TOGETHER: Each desk mic mount clamps directly to table, essential to any home studio setup for recording music, youtube, gaming, podcast, streaming, singing and more. PLEASE NOTE: These microphones require +48V Phantom Power to operate.
Check Stock

Pro-Grip Straight Edge Clamps (24\ Clamp)

  • Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing..
  • Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable..
  • The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects..
  • Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play..
  • The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24" clamp..
Check Stock

ovsor Truck Clamps Set of 6 Packs for Truck Canopy Clamps, Truck Bed Clamps, Mounting Clamps for Chevy Silverado Sierra 1500 2500 3500, Dodge Dakota Ram 1500 2500 3500, F150, F250, Toyota Tundra

  • [TRUCK MOUNTING CLAMPS] – Package includes 6 truck topper clamps. They can act as truck topper clamps, truck topper clamps, camper shell clamps and truck cap clamps..
  • [COMPATIBILITY] – Compatible with Dodge Dakota, Ford F150, F250, Mitsubishi Raider, Nissan Titan, Chevy Silverado, Toyota Tundra and so on. It works with any type of truck..
  • [EASY TO INSTALL]- No drilling is required when installing our truck mount clips. First, place the two parts of the truck mounting clamps where you need to fix it, then put the small nut provided on the screw, and tighten the screw with a wrench. With a small nut on the part where the screw and the truck mounting clip contact, it can play a fixed role..
  • [TRUCK TOPPER CLAMPS MATERIAL] – The truck clamps are made of perfect aluminum alloy, ensure maximum intensity of work and hard to be corroded..
  • [OVSOR AFTER-SALES SERVICE] – Provide quality products and good customer service, we will solve the problem for you within 12 hours..
Check Stock

NEEWER Metal Table Mounting C Clamp for Microphone Suspension Boom Scissor Arm Stand Holder with an Adjustable Positioning Screw, Fits up to 1.9 inches /5 centimeters Desktop Thickness (Black)

  • An adjustable table mounting clamp is designed to securely mount your microphone stand to a tabletop or other flat surface using an adjustable positioning screw.
  • Easily clamps to any desktop up to 2.2"/5.6cm thickness.
  • Suitable for use in stores, by families, on stages, in studios, for broadcasting.
  • Heavy duty metal c clamp provides a sturdy and reliable means to hold your microphone stand.
  • Soft foam padding protection at the contact point with your table helps protect the surface from scratches or getting marked.
  • Note: Microphone suspension boom scissor arm stand, cellphone, iPad are not included.
Check Stock

VVHOOY Action Camera Motorcycle Mount Bike Handlebar Bracket 360 Degree Rotation Bicycle Clamp Holder Adapter Accessories Compatible with GoPro Hero AKASO DJI Campark Dragon Touch Action Camera

  • Motocycle Bicycle Bike Handlebar Clamp Mount:Use for Camera Stand Holder- Compatible With Gopro Hero 6 5 4 3+ 3 2 Session,YI 4K Camera,for AKASO....
  • Super Camera Clamp Mount with Tripod : Within the clamps of the a perfect Handlebar Mount are rubber grips, which provide a sturdy and non-slip hold.....
  • The adjustable screw top allows the GoPro to rotate 360 degrees and can be easily tightened your bicycle bike to prevent unwanted movement..
  • Within the clamps of the Handlebar Mount are rubber grips, which provide a sturdy and non-slip hold..
  • With standard 1/4"-20 threaded head Universal for Gopro Action Cameras, Light Camera, Mic,Iphone,Works for Any pipe or bar that s up to 1.5 Inches in....
Check Stock

EleTab Dual Monitor Stand - Heavy Duty Dual Arm Monitor Desk Mount Fully Adjustable, Fit 2/Two LCD Screens up to 27 Inch with C-Clamp and Grommet Base, White

  • Unique Appearance - EleTab dual monitor mount with brand new industrial design and strengthening structure provide the best office experience..
  • Upgraded Compatibility - Fit two screens up to 27 in size and 17.6 lbs in weight each with 75x75mm or 100x100mm backside mounting holes..
  • Two Installation Method - Mounts to your desk (from 0.3" to 2.55" thick) via a heavy-duty C-clamp or optional grommet mount..
  • Full Articulation - Adjustable arm offers +35 to -35 tilt, 180 swivel, 360 rotation, height adjustment along the center pole..
  • Cable Management - Removable cable clamps providing a neat table top and stylish appearance for the most comfortable working environment, also comes with a green set for replacement..
Check Stock

Karltys Compatible with Cell Phone Holder Ford F-150 2021-2023 F150 Car Mobile Phone Holder Dashboard Air Vent Mount for iPhone All iOS Android Phone Fully Adjustable Stand

  • ...y orientation or position for best viewing. Fairly convenient for use, one hand operation, only takes ONE touch to clamp and secure your phone or release it..
  • HOLD YOUR PHONE FIRMLY: Air vent phone mount for car features in stable mechanical triangle structure and upgraded clamps which will grab and hold your phone tightly and securely. Doesn’t shake, move around or fall off even in sharp turn or bumpy roads. Soft rubber pad inside the clamps and bottom foot will not scratch your phone and nice texture surface increases friction and helps prevent falling off..
  • UPGRADED DESIGN & WIDE COMPATIBILITY: Karltys phone holder is made of quality ABS material, scratch resistant and durable. Equipped with wider clamps, the car phone mount can hold different sizes of smart phones and mobile phones with big case. And the reserved charging port makes you easy to charge your phone while driving..
  • EASY TO INSTALL: Align the position, snap the base directly into the air vent , make the phone holder stuck on the base, fix the ring, turn on the button and put your phone holder in. Easily be removed if needed. ATTENTION: Loosen the nut a....
Check Stock