ReviewsTable Saw Distance Gauge

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

DCT 4 Pack Safety Push Sticks – Straight Table Saw Push Blocks and V Style Push Sticks Wood Working Push Stick Set

  • ...es help to create smoother, more effective, and professional looking cuts by improving your visibility, control, and safety when working with woodworking saws and power tools.
  • DESIGNED FOR COMFORT AND EFFICIENCY: Comfortable handles help maintain consistent pressure on your stock while keeping your fingers at a safe distance from your cutting blades for increased control, visibility, and security.
  • V style push blocks feature angled handles and 6.5 inch contact length for a consistent hold on longer projects while the 11.5 inch push sticks keep your hands at a farther distance from the cutting head for increased safety.
  • MAXIMIZE YOUR CONTROL: Table saw pushers provide increased consistency and control.
  • Angled handles and butted ends allow you to push down and forward on your stock for secure movement and to help prevent kickbacks when guiding your stock through cutting blades.
  • WORKS WITH YOUR CUTTING MACHINES: V style benchtop planer push tool fit into spaces as thin as .5 inches (1.3cm) while the straight woodworking pushers fit spaces as thin as .75 inches (1.9cm).
  • Simply hook the table saw stick butt against the edge of your stock and push to guide wood through your benchtop planer, table saw, router table, benchtop jointer, or other woodworking power....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • ...t is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands an....
Check Stock

Beslands Backlight Digital Level Box Protractor Angle Finder Gauge Bevel Gage Inclinometer with Aluminium Framework Magnetic Base Saw Electronic Finding

  • Working Temperature: 32°F to 122°F (0℃ to 50℃)..
  • Strong Magnetic Base - Firmly fixed on saw tables, fences, blades and other metal surfaces.
  • reversible display reversed when inverted..
  • Easy carrying - Compact and lightweight, constructed of aluminum alloy and ABS, this magnetic miter gauge is compact and lightweight..
  • Energy Saving - Just one AAA battery (not include) can keep this energy-saving level gauge working for more than 50 hours..
  • Wide Range of Applications - this digital angle gauge can be used for in auto repair, machine manufacturing, table saw or miter saw blade lever measurement, constructional engineering, and for construction, woodworking, machinery, telecommunications, automobile etc..
Check Stock

Peachtree 2271 Saw Blade Storage Rack. Safely Store Up to Eight Saw Blades. Store Table Saw Blades, Circular Saw Blades and Either 10\ or 12\ Blades

  • No more fussing with blades stacked directly on top of one another. With the Fulton Saw Blade Storage Rack you can neatly and safely store up eight table saw or circular saw blades with no hassle. The Saw Blade Storage Rack will comfortably hold blades from 7-1/4" to 12" in diameter safely. With the rubber lined slots the rack will protect your saw blades from damage and make it easier handle the blades when needed..
  • Neatly and safely store up eight table saw or circular saw blades with no hassle.
  • Saw Blade Storage Rack will comfortably hold blades from 7-1/4" to 12" in diameter safely.
  • With the rubber lined slots the rack will protect your saw blades from damage and make it easier handle the blades when needed..
  • Designed to be mounted to your wall and is made from heavy gauge steel for excellent durability..
Check Stock

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock

Shop Fox W1837 10\ 2 hp Open-Stand Hybrid Table Saw

  • SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch..
  • UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. Poly v-ribbed belts reduce vibration and help ensure a great cut. Table flatness is measured diagonally at 0. 010” maximum gap..
  • RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe..
  • CONFIGURABILITY: Over 150 unique configurations, makes the Contractor Saw the most configurable SawStop saw. Adding a mobile base, sliding crosscut table or router table, are just a few of the ways to make this your ideal saw..
  • UNIVERSAL PERFORMANCE: The Contractor Saw offers versatility, reliability and safety for a variety of users. The cast iron table top (Cast Iron Wing Assembly, CNS-CIWA, sold separately) creates a better-than-hybrid performance in the shop at an affordable price..
  • 36-INCH T-GLIDE FENCE ASSEMBLY: The 36-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection..
Check Stock

Towallmark Table Saw, 10 Inch 15A Multifunctional Saw with Stand & Push Stick, 90° Cross Cut & 0-45° Bevel Cut, 5000RPM, Adjustable Blade Height for Woodworking

  • [BEVEL ANGLE and HEIGHT ADJUSTMENT] The blade height can be adjusted to meet your specific cutting needs with hand wheel. This table saw has a rack and pinion bevel control that provides 90°cross cutting and 0-45°bevel cutting..
  • [REMARKABLE CUTTING PERFORMANCE] Towallmark portable table saw features with high-quality 15 Amp motor, which can achieve 5000 RPM cutting performance, easy to cut all kinds of hardwood. And triangle supports at the back of the metal stand improves the stability of the table saw. Besides, extensions on both sides of the table top also allows it to handle a larger piece of wood more stably..
  • [PORT FOR DUST COLLECTOR] Towallmark table saw is designed with port for connecting dust collector at the back, which can help create a cleaner working environment. And it is also designed with storage part at the left and right sides for storing wrenches and push stick when they are not in use..
  • [Safety Design] The table saw has a transparent blade guard which can provide a clear view and prevent hurt due to accidental touch. And it also comes with a push stick to enhance security during operation. Furthermore, On-off switch and overload protection are equipped for added safety..
  • [WHAT YOU GET] Towallmark Table Saw, 10-Inch 24-Tooth Carbide....
Check Stock

Southwire 2568SW0006 50ft 12/3 SJTW Premium High Visibility Low Temp Cord Blue, 50 ft

  • High visibility blue low-temperature vinyl jacket, resists oil, grease,moisture.
  • 3-conductor, 12-gauge wire, 15-amp rating.
  • Contractor grade, circular saw, heater, table saw.
  • Power indicator light lets you know where the power is 12 GAUGE HEAVY DUTY, 50 ft..
Check Stock

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

Miter Bar, 1Pcs Durable In Use Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Suitable for Jigs Fixtures Sleds Router Tables and General Woodworking, 300 mm / 11.81 inch

  • Wide Applications : This is a miter bar usually used in table saw woodworking works, for building various jigs on your table saw, like miter sleds etc..
  • Convenient to Use : Universal threaded mounting holes for convenient use. Includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for perfect sliding action.
  • Good Performance : Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Useful and Practical : For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any application.
  • Fine Quality Aluminium Alloy Material : Made of high quality aluminium alloy, this miter bar is of strong strength and reliable durability for several year using without abusing.
Check Stock