ReviewsTable Saws

Woodworking Sometimes Measure Once Carpenter Circular Saw Pullover Hoodie

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM.
Perfect for slicing through both hard and softwoods of all kinds.
Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts.
Designed with 80 carbide-tipped teeth for fine-finish wood cutting.
Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws.

Fast cutting with long durability, negative rake angle design is suitable for hard materials.
Possess high hardness large cutter head, fine grinding surface, stable body.
Saw blade have stable structure, excellent performance and long service life.
Good-quality high-speed steel material, possess good strength, toughness, and strong wear resistance.
This equipment is used for circular saws, mitre saws, table saws, radial arm saws, etc..

for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance..
Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood..
0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind..
Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..

2 in 1 design that allows you to set up the table saw and set the Router depth, using the same tool.
Ideal for setting up blade height on table saws and Router bits depth.
Setup Router Blades: from 1/8" through 1" in increments of 1/16".
Made of Aluminum with laser engraved marking for ultimate clarity and long lasting durability..
Setup Table Saws blade hieght From 1/8" to 2" in increments of 1/8".

Fits all contractor-grade table saws and all right-tilt cabinet-grade table saws that have 27-Inch deep by 1-1/2-Inch thick cast iron tables..
Included ProFence quickly dismounts and hangs on provided j-hooks while you use your tablesaw..
Includes router top, fence, and mounting hardware. ProPlate is sold separately. Plate opening 8-1/4 by 11-3/4. The ProLift 40-150 has a 3/8” thick plate..

❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....

80 teeth saw blade for high cutting speed, high strength, good stability and durability..
Made of high quality high speed steel, ensures stable quality and high efficiency, having stable performance..
Metal circular cutting blade with negative front rake angle design, increase the ability of resisting the tooth edge collapse..
Large high‑hardness cutter head, fine grinding surface, stable body, suitable for cutting hard materials..
Wide application, used for circular saws, miter saws, table saws, radial arm saws, etc..

For for fast, smooth, heavy-duty rip cuts on soft/hardwood. Good performance on plywood..
To be used on radial arm saws, miter saws, table and special saws..
0.126 kerf thickness, 0.087 plate thickness, 20° hook angle, FTG-Flat Top Grind..
Micrograin carbide teeth to last longer and deliver smooth cuts..
Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion..

Featuring a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM.
Perfect for framing, trim carpentry, remodeling and more.
Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
Designed with 24 carbide-tipped teeth for general-purpose wood cutting.
Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.

Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM.
Perfect for framing, trim carpentry, remodeling and more.
Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
Designed with 28 carbide-tipped teeth for general-purpose wood cutting.
Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.

❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....