ReviewsTail Light Lens Paint

LIMICAR 4 RED 2 White 6' Oval LED Trailer Tail Lights Kit 10-LED Stop Turn Brake Reverse Back UP Marker Tail Light for Truck Trailer Tail Bus RV Jeep 2 Pack

BRIGHT & ENERGY-EFFICIENT: Advanced LED combination light with better heat distribution, no glare, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather..
Multi-use Tail Lights: Includes 4 red + 2 white oval LED lights. Red lens and 10 LEDs function as turn signal, tail and parking lights. Clear lens and 10 white LEDs function as reverse and backup lights..
WATERPROOF: Waterproof rate IP65, effectively protects the tail light from dust, sand, moisture, rain and other impact of inclement weather. Each lens is sonically welded to the housing and built to ensure maximum durability in working conditions for your vehicles..
EASY INSTALLATION: Designed with 3 specific colored wires for easy connection. White wire: negative. White + Black Wire: Low Brightness / Running Light.
White + Red Wire: High Brightness / Brake Light..
UNIVERSAL FIT: Ideal for most 12V vehicles including trucks, trailers, tractors, semi-trailer, Dump Truck, bus, boat, special vehicles, etc..

Check Stock

Qiilu Auto Lens Repair Kit, 3 Pieces Car Lights Crack Repair Film Multi-Pack Headlight Taillight Repair Tools (Red, Amber, Clear)

[ Function ] --- This tail light repair tape is designed to repair tail lights, turn signals, and clear lenses crack easily without removing the housing.Simple repair process, just cut and paste. Size: 192 * 95mm..
[ Precise Design ] --- The repair panel designed with a pre-formed grid pattern, which matches your original lens closely..
[ 3 Colors Design ] --- Multi-pack repair kit comes with 3 colors, red, amber and clear..
[ Good Seal Performance ] --- Our tail light lenses tape adopt special adhension will form a weather proof seal, allows to paste on flat or curved surfaces..
[ Instructions ] --- ①Remove all crack and broken pieces around damaged area②Clean lens around area thoroughly with dry cloth③ Hold panel over damaged area to determine size of lens repair panel. Position the pane allowing 1/2 inch over lap on all sides of damage. if size selected needs to be smaller, trim along the inner grid lines④Peel backing from panel and center over area to be repaired. Press the panel to the lens and run your fingers around the edges to insure a good bond..

Check Stock

KATUR 1Pcs Red 12V Motorcycle Tail Light Brake Stop Running Light with License Plate Holder Black Compatible with Harley Bobber Chopper Cruiser Dyna Glide Sportster

√ 1Pcs Motorcycle Tail Brake Light,1Pcs Motorcycle License Plate Bracket.
√ Fits: Most Motorcycle, Custom Bike, Cruiser, Chopper, Bobber ,Cafe Racer ect..
√ Application:Function as Running Tail Light, Brake Stop Light, License Plate Holder,etc.
√ Housing Color: Black,Light Color: Red,Lens Color: Red,Voltage: 12V,Wattage: 20W (20W incandescent light bulb),Thread Diameter: 8mm (not included in package),Adjustable Mounting Slot Spacing: As the picture shown,Cable Length: 9.85" (25cm),Material: Good Quality Steel Housing + PC lens,Weight: 300g,3 wires connection system..
√ Recommended Reason:Made of High Quality Steel Housing and PC Lens,Designed for Most Custom Motorcycle,Upgrade your motorcycle a Unique Style Appearance.

Check Stock

Partsam 2pcs 15' inch Clear Lens Red 11 LED Flange Mount Trailer Truck RV Stop Turn Signal Tail Lamps 3rd Third Brake Light Bar Warning Light ID Bar

Partsam ( 2 x Red in clear lens ) Super bright LED Surface Mount 15" light bar, completely sealed & waterproof..
Each light has 11 Super Diodes for a Bright Performance.
Polycarbonate lens is sonic welded to the housing. For use on heavy duty trucks, semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting..
Functions as marker, clearance light, identification light, ID bar, stop tail brake light, turn signal light, 3rd brake light for trailers trucks SUV camper and even on and Polaris RZR series as the customer feedback suggest, any application you can imagine..
HARDWIRED WITH THREE WIRES: White Wire - Ground.
Red Wire - high brightness as Stop/Brake light.
Black Wire - low brightness as tail/running light.
NOTE: the stop and tail light will not be functioned at the same time.
Light Size: Dimensions: 15.5" x 1.25" x 0.5".

Check Stock

Partsam 20 x 3/4" Round Led Light Trailer Boat Marker Clearance High Low 3SMD Clear Lens, 3/4" round LED combination turn signal running lamp fender lights 3-WIRE assembly Taillights(10Red+10Amber)

Package includes 20Pcs(10Pcs Red and 10Pcs Amber) 3/4" Led Marker Lights 3 Wires in Clear Lens, 3 diodes per light, Fix 3/4" Hole.
Sealed Light, 3 Wires Setup, High Low Function.
3/4" amber led marker lights 3 wres in clear lens: 3/4" round LED lamp for use as a combination turn signal and running lamp, can be installed anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp(one function at a time). It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused.
3/4" red led marker lights 3 wres in clear lens: Clear Lens Red Mini 3/4" Stop Turn Tail Lights 3 LED with Rubber Grommets,very bright for it's size. Dual brightness. install with a rubber mounting grommet and requires a cutout hole of 3/4" diameter. These 3/4" led lights come with 3 wires (white wire ground, black wire is tail light/marker light/clearance light/running light and red wire is for stop and turn functions). This light is DOT approved as your only tail light or turn signal.
These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet....

Check Stock

MZS Tail Light LED Integrated Turn Signal Blinker Smoke Compatible with CBR1000RR CBR 1000RR FIREBLADE 2008-2016

NOTICE - This is an aftermarket parts, not an OEM part, it will fit the models listed. Before purchase, please make sure it will fit your model and....
HIGH QUALITY COMPONENTS - MZS tail light use high quality ABS injection molded housing and UV protected lens element..
ADVANTAGE - The integrated LED Tail Light with Turn Signals have waterproof, dustproof, durable and high toughness..
ALL IN ONE - This tail light can be used as running light, brake light, turn signal light(turn left/right), Dual mode red/yellow LEDs, is used to....
INSTALLATION - Original tail lights have 7 wires inside and LED only have 5 wires, if connected the wrong one to make the light not light. So before....

Check Stock

ANKIA 60-LED 12V Motorcycle Tail Light Brake Turn Signal Lamp License Plate Light for 2002-2010 FXST Models Harley Davidson Dyna Sportster 1200 883

Working Vottage: DC 12V. Light Color: Red&Amber.
All in one integrated tail light:60-LED Tail Light with running light/brake light/Turn Signal Light,White Light used as license plate light,this tail....
Wire for functions: Running--White Wire, Brake--Red Wire and Turn Signal: Yellow wire-- right turning.
Fitment: All 1991-2010 FLST Models (except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSE).
Package: 1 x Harley Smoked Led Tail Light Brake Turn Signal Lamp.

Check Stock

NTHREEAUTO Motorcycle Smoked LED Tail Light 12V Brake Taillight Integrated with Turn Signals Compatible with Honda CBR600RR 2003-2006 CBR1000RR 2004-2007

【Compatibility】The tail light compatible with Honda CBR600RR F5 2003-2006, Honda CBR1000RR 2004-2007..
【Easy Installation】 It can be used as tail light, turn signals, brake light. Easy installation. No modification required. Black wire-- Negative.
【2X Brighter Than Factory Light】 10Pcs LED diode bulbs lit up for tail light and brake light, 2x brighter than factory light, make you easier....
【Advanced Design】 Smoked lens cover with smooth line, made of high quality ABS plastic material and processed with ultrasonic housing,....
【Buy with Confidence】 Come with 1Pcs tail light. You are backed by 6-Month warranty since order purchase date. If you have any questions, please....

Check Stock

Tail Light [Eagle Claw Design] DOT Approved Brake Running Lights Motorcycle LED Taillight Compatible with Harley Sportster Dyna Softail Touring Road Glide Road King 1 PCS

【EAGLE CLAW DESIGN】New and cool led tail light lay down style. Black with red lens, clear protective cover. The back shell of motorcycle led tail....
【LIGHTING MODE & SPECIFICATIONS】Red(running), Bright red(brake), White(license plate), The tail light comes with Osram led chips, voltage - DC 12V....
【EASY INSTALLATION】It's easy to install the led tail light. Wire connection: black-ground, blue-running light, red/yellow-brake light, Insert the....
【REFUND IF NOT APPLICABLE】Fitment: [Sportster] XL1200C Custom(1999-2006), Custom (EFI) (2007-2010), XL 1200S sport(2000-2003), XL883 (2004-2006),....
【PACKAGE INCLUDED】1 Pcs tail light + 1 Pcs electrical connector. 12 months warranty. SHOP WITH CONFIDENCE: (1) Not fit for your vehicle= Return it....

Check Stock

ANKIA Motorcycle Chopped Rear Fender Edge LED Brake License Plate Tail Light Stop Running Light Turn Signal Lamp for Harley Sportster XL883N 1200N XL1200V XL1200X Red

The Motorcycle Tail Light Working Voltage: DC 12V.Wattage:1.44W(8 LED,0.18W/LED). Light Color: Red. Lens Color: Red/Smoked black/transparent.....
Standard Fender Edge LED tail light for Harley Davidson,used for running light,brake stop light,rear tail light, license plate light,turn signal light.
Motorcycle Stop Light Curved design provides perfect match to the chopped rear fender.
Led Motorcycle Brake Light 5 Wires Connection System: GND (Black wire).
Motorcycle Tail Light Fitment:For Harley Davidson 2004-2014 Sportster 883,Sportster 1200.

Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

Package includes 2 Pieces 8.5 Inch Oval Led trailer tail lights in Red Lens, 2pcs self tapping screws are included for complete mounting. It is a really nice Low profile trailer light for the back of your trailer, RV, Camper, Airstream or motor home. This led taillight is universal design 12V DC and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on.
These oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the....

Check Stock