ReviewsTap Drill Set

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

[What You Will Have] Set of 6 metric tap drill bit set M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5 Short size is not easy to shake and can drill accurately.
[Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic greatly save processing steps and time costs, improve working efficiency.
[Material] HSS4341 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
[Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
[Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please c....

Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
Storage case is lightweight and durable for easy storage and is portable for all job environments.

Check Stock

aiyun 6 Pack Drill Tap Metric M3-M10 Tap Set Metric Drill Taps for Steel Aluminum, Sheet Metal and Other Hard Metal Thin Plates(HSS6542)

[What You Will Have] Set of 6 tap drill set metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5.
[Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on aluminum, sheet metal and other hard metal thin plates, greatly save processing steps and time costs, improve working efficiency.
[Material] HSS6542 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
[Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
[Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.

Check Stock

Hand Pipe Tap Set Drill Taper NPT 1 Inch Steel Bits Tool for Machining Thread with Plastic Box 1PCS,Tap

Hand Pipe Tap Set are designed to clean and re-thread damaged or Jam Pipe threads.
Hand Taper Set allows chips to collect in the Flutes and are well suited for most applications.
Drill Taper Sets have an action that engages when they are run in a clockwise direction.
Pipe Tap Taper, sizes 1"-11-1/2 NPT carbon steel Pipe taps in plastic pouch case.
Drill Pipe Tap Set feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

Check Stock

6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC（Golden）

Complete Set: Set of 6 pcs drill bit tool, 6 different size tap drill bit, M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch, a variety of specifications to choose from, convenient for work..
3-in-1 Combination Tap: Drilling - tapping - chamfering, three-in-one composite tap with hexagonal handle can be achieved in one step without frequent replacement, and the operation is more convenient and faster, high processing efficiency..
Professional Tools: The standard 1/4 inch hex shank can be installed on ordinary electric drills and bench drills, with strong locking force and not easy to slip. The pointed tap can be tapped to the bottom of the blind hole, large helix angle, better chip removal performance.
Premium Material: Our tapping bits are made of high-speed steel with titanium coating. They have high hardness, sharpness and wear resistance, high heat resistance and strong cutting performance. They are a good helper for cutting high-hardness materials..
Widely Application: Our tap drill bits have strong cutting toughness, suitable for various cutting series, processing range: copper, aluminum, brass, iron plate, steel, metal sheet, plastic and other metals..

Check Stock

TEMO 2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit

2 pc 6-32 Combination Drill and Tap Multi Use Deburr Countersink Hex Bit.
Made of high speed M2 steel. For use with: steel, copper, brass, aluminum. drill, tap and deburr in one operation..
Drill, tap and deburr in one operation. Tapered tap design prevents thread damage from over-drilling..
One piece construction guarantees proper drill for tap size. | 135 self-centering split point tip. 10 gauge (3.5mm) capacity. Usage suggestions: use of cutting coil recommended. clean tap of metal chips to extend life. reverse drill to back out after completing tap..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

Drill America - POU3/8NPTW/DRILL 3/8\ Carbon Steel NPT Pipe Tap and 37/64\ High Speed Steel Drill Bit Set, POU Series

Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads.
Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
3/8" carbon steel NPT tap and 37/64" HSS drill bit with 1/2" Shank.
Set contains matching NPT pipe tap and high speed steel drill bit.

Check Stock

JEFE HEX 5/16\ Hex Shank Titanium HSS Twist Drill Bits, 135 Degree Easy Cut Split Point Drill Bit for Steel, Copper, Aluminum, Zinc Alloy, Wood and Plastics, Packed in a Double Blister.

【Various sizes】12pcs titanium drill bit set in SAE and metric with all popular sizes. 6 pieces SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 1/4-20NC. 6 pieces metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5. Each hex drill bits is engraved with size label, which is convenient for you to read and choose..
【Quick Change】Comes with a quick change adapter, with lock function, can be firmly and stably installed on the electric drill. Maximize efficiency by switching between different sizes easily. 1/4 inch hex shank adapter fits for electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine..
【Premium HSS】Made of premium high speed steel and titanium coating, the impact drill bit set features sharp and fast execution and better precision to retain strength and efficiency, the hex tail has good impact resistance and fracture toughness. Rust-proof and corrosion-resistant, more wear-resistant and long lasting..
【Multiple Application】The drill and tap set with high hardness, can easily work on wood, PVC, plastic, aluminum, copper and metal sheet etc. These metal drill bits suitable for drilling, tapping, deburring and countering holes..
【High efficiency】 All in one, no need to drill a hole....

Check Stock

IRWIN Tap And Die Set with Drill Bits Machine Screw/SAE/Metric 117-Piece 26377

Ideal for rethreading fasteners and fastener holes for auto and machinery repair.
Constructed of high carbon steel for durability.
Puts commonly needed taps, dies, drill bits, and extractors at your fingertips.
Perfect set for the professional craftsman.
Contains 117 of the most commonly needed machine screw plug tap and hex die sizes, drill bits, spiral screw extractors, an adjustable handle tap wrench, 2-in-1 tap wrench, t-handle wrench, pitch gauges, and a plastic case.

Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.

Check Stock

Hymnorq Metric HSS 4341 Combination Drill and Tap Bit Set of 6pcs – Including M3, M4, M5, M6, M8, M10-1/4” Hex Shank and Self-centering Split Point - For Tapping in Wood Plastic and Aluminum

Back tapered beyond tap to prevent thread damage from over-drilling.
Deburr/countersink also provided on bit beyond back taper.
Quick change adaptor included in both metric and standard kits.
All operation in one time with power drill saves labor and time.
Made from hardened high-speed steel vs. carbon steel for longer life.
Point is self-centering and eliminates the need for center drilling or center punching.
6 sizes in one drill and tap bit set (M3, M4, M5, M6, M8, M10) to meet your diversified requirements.
Drill and tap bits have high quality hex shank to confirm strong connection to drill chuck. Ideal for hole drilling, tapping and deburring/countersinking applications in wood, plank, mild steel, copper, brass and aluminum metals.

Check Stock