ReviewsTap Taper Interface Reamer

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • ...w it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.
Check Stock

MOTOKU New HSS 1/16-27 NPT Taper Pipe Thread Tap

  • Cuts internal threads in pipes. Ideal for pipe fittings..
  • Nominal size of the tap is that of the pipe fitting being tapped.
  • Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP).
  • Includes one taper tap each of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt, and 1" - 11-1/2 npt. Made in the USA..
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...riors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carryin....
Check Stock

Hand Pipe Tap Set Drill Taper NPT 1 Inch Steel Bits Tool for Machining Thread with Plastic Box 1PCS,Tap

  • Hand Pipe Tap Set are designed to clean and re-thread damaged or Jam Pipe threads.
  • Hand Taper Set allows chips to collect in the Flutes and are well suited for most applications.
  • Drill Taper Sets have an action that engages when they are run in a clockwise direction.
  • Pipe Tap Taper, sizes 1"-11-1/2 NPT carbon steel Pipe taps in plastic pouch case.
  • Drill Pipe Tap Set feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

Amazon Brand - Denali 14-Piece Drill and Tap Combo Set

  • ideal for quick, easy thread cutting and hole making.
  • Includes a 14 piece set with 1/8-27NPT Pipe, 6-32 Taper, 8-32 Taper, 10-24 Taper, 10-32 Taper, 12-24 Taper, 1/4 - 20NC, Taper 1/4 - 28NF Taper, 5/16 - 18NC Taper, 5/16 24 NF Taper, 3/8 - 16 NC Plug, 3/8 - 24 NF Plug, 7/16 -14NC Plug and 1/2 -13NC Plug, 1-case.
  • Hardened, precision ground and polished surfaces with a rust resistant satin finish ensure long lasting strength.
  • Product dimensions: 5.12x2.95x0.83 inches(LxWxH, Carry Case).
  • This product is covered by the Accessories 1-Year Limited Warranty.
Check Stock

YaeKoo 2 pcs Tapered Reamer T Handle 6 Fluted Chamfer Bridge Pin Hole Hand Held Reamer Sizes 1/8\-1/2\ (3-13mm) & 5''-5/8'' (5-16mm) Handle Drilling Tools

  • The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels.
  • The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort.
  • Reamer T handle for easy reaming.The removable handle facilitates compact storage..
  • Material of Taper Reamers: high carbon steel heat treatment, longer service life.
  • Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13mm) size and 1/5" -5/8 "(5mm -16mm) size.
Check Stock

HHIP 2006-0085 15/16-1-1/16\ High Speed Steel Adjustable Blade Reamer, 6 Blades, 9\ OAL, Size H

  • Straight flute reamers should be used in thru-hole applications only.
  • Blades are adjusted by loosening one nut and tightening the other.
  • Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool.
  • Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
Check Stock

Rannb Adjustable Hand Reamer Square End Hole Cutting Tool Adjustment Range 17-19mm

  • ⭐【Material】The Adjustable Reamer is made of premium HSS with good hardness and toughness..
  • ⭐【Square End】Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench..
  • ⭐【How to Adjust】Blades are adjusted by loosening one nut and tightening the other..
  • After reaming the hole can get the exact size and shape..
  • ⭐【Applicable Material】A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials..
Check Stock

Pro Fresh Citrus Reamer

  • Premium materials: High quality steel manufacturing, high hardness, high durability. Its taper is 1:10, its structure is stable, and its performance is excellent..
  • Stable structure: It is designed with a 1:10 reamer structure and uses a cutting edge. It has high cutting capacity and high precision, which can be reliably stable in use..
  • Exquisite processes: It meets quality control standards, manufacturing advanced technology, achieving high quality and good performance..
  • Long-term service life: Equipped with cutting edges, high cutting capacity, high precision, long service life..
  • Uses: For reaming mold processing and manual processing..
Check Stock

T-Handle T Type Tap Wrench Set of 3 Pieces Solid Collet Jaws

  • T-Handle Tap Wrench Solid Jaw 3 Piece Set.
  • Set of 3 Piece - Jaw Opening Ranges 1/16" to 5/32", 5/32" to 1/4" & 1/4" to 1/2".
  • The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice for a wide variety of applications.
  • Unused PartsDesigned for Use with Taps, Reamers, Screw Extractors, & Other Tools with Square Shanks Works the Same.
Check Stock