ReviewsTape Drive Head Alignment Tools

Woodworking A-Line It Basic Kit With Dial Indicator For Alignment And Calibration Workshop Machinery Like Table Saws Band Saws

  • Quickly Set-Up,Tune Up,And Check The Accuracy Of Your Shop'S Tools With This System.
  • Check Table Saw Blade And Fence Alignment,Arbor And Blade Run-Out,Miter Slot To Blade Squareness,Arbor/Chuck Run-Out,Jointer/Planer Head To Table Parallelism,Jointer/Planer Knife Alignment,Out-Feed Table Alignment,Router/Shaper Spindle Run-Out,Or Any Other Set Up Or Alignment Measurement You Desire.
  • The 1" Capacity Dial Indicator Reads In.001" Increments For Absolute Precision.
  • Self Adjusting Miter Slot Rod With Leveling Screws And Spring Plungers For Perfect Fit In Your Miter Slot.
  • Dial Indicator Mounting Bar Measures 3/4” X 3/4” X 5-1/2”,Miter Slot Rod Measures 3/8” X 3/4" X 6-1/4".
Check Stock

Outboard Trim/Tilt Pin Wrench Tools Set - MT0004 & MT0006 & MT0009 Fit for Yamaha Suzuki Johnson Evinrude

  • Application -- Compatible with Mercruiser Alpha Alpha 1 MR Bravo OMC Cobra Volvo. With this tools set, you could replace gimbal bearings and hinge pins..
  • Gimbal Bearing Puller -- This bearing puller remover can easily remove the gimbal bearings on bell housings by turning the end of the tool with a wrench..
  • Gimbal Bearing Installer -- Used to install the new gimbal bearing back, set the bearing on the installer than insert the installer in engine. Also it can be used to check engine coupler alignment with the gimbal bearing and drive..
  • Hinge Pin Tool -- This tool is used to remove and install hinge pins for Mercruiser drive units. It can separate the housing from the gimbal ring on the hinge pin bolt..
  • High Quality -- Our tool set is made of premium solid steel with nice black Oxide finish which is anti-corrosion and rustproof. The tools are specially hardened for added strength and impact protect. So the product can be durable and service a much longer time..
Check Stock

A-Line It Basic Kit with Dial Indicator For Aligning and Calibrating Work Shop Machinery Like Table Saws, Band Saws and Drill Presses

  • Quickly set-up, tune up, and check the accuracy of your shop's tools with this system. Check table saw blade and fence alignment, arbor and blade run-out, miter slot to blade squareness, arbor/chuck run-out, jointer/planer head to table parallelism, jointer/planer knife alignment, out-feed table alignment.
  • router/shaper spindle run-out, or any other set up or alignment measurement you desire..
  • The A-LINE-IT Basic Kit is the perfect starter kit for hobbyists and small shops..
  • The 1" capacity dial indicator reads in .001" increments for absolute precision. Self adjusting miter groove bar with leveling screws and spring plungers for perfect fit in your miter slot..
  • Dial indicator mounting bar measures 3/4” x 3/4” x 5-1/2”, miter groove bar measures 3/8” x 3/4" x 6-1/4"..
  • Comes with hardware and hex wrench for assembly, instructions and instructional DVD for expert guidance in getting the best performance and accuracy from your woodworking machines..
Check Stock

The GolfWorks GGS Golf Club Gripping Station

  • Save valuable time and improve consistency of your regrips with this well-designed Gripping Station.
  • Built to last under high-volume production, the GolfWorks vise mounted gripping station is compact and easy to use.
  • The alignment bar indexes the leading edge of both right- and left-handed woods and irons, ensuring proper alignment.
  • The quick clamp secures any diameter golf shaft and is safe to use with both graphite and steel shafts.
  • The GolfWorks vise mounted gripping station comes complete with a solvent recovery pan and two tape dispensers - one for each of the double-sided tape and build-up tape (Vise not included).
Check Stock

Kobalt 856855 300-Piece Advanced Mechanic's Tool Set in Foam Trays, Inch/Metric

  • This 1/4-in drive set includes 73 commonly used tools including 15 metric and SAE sockets, a 3-in extension and a 72-tooth ratchet and will be a great addition for simple fixes.
  • Other tools include 16 metric and SAE hex keys, 16 oz hammer, driver handle with 20 insert bits, 3-piece pliers set, 6-in adjustable wrench, 12-ft measuring tape, 9-in level, a pair of household scissors and retractable utility knife with 10 spare blades.
  • 1/4-in drive metric and SAE socket sizes include 10, 11, 12, 13 and 14 mm as well as 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 and 1/2-in.
Check Stock

Hyper Tough 116 Piece Tool Set UJ5387TA

  • HOME ESSENTIAL- Designed with most essential household use tools for home, house, garage, apartment, dorm, back to school, bike repair projects and as....
  • HIGH PERFORMANCE- High strength drop forge alloy steel and heat treatment provide hardness and torque for high performance.
  • DURABILITY- Tools are made with heat treatment and polished chrome plated finish which protects against corrosion..
  • VARIETY- Includes hammer, adjustable wrench, pliers, measuring tape, 3/8 inch drive ratchet handle, sockets, screwdriver bits, hex key wrenches, etc.....
  • EASY STORAGE- All tools contained in a sturdy blow molded case for easy tool storage, keeping tools safe in house or garage and good portability.
Check Stock

EZRED MR1X Extendable Ratchet, Silver

  • EXTENDABLE RATCHET: This durable ratchet features an extendable handle that extends from 25" to 40" & a precise 5-degree drive head with 24 teeth for greater access. Exceeds ANSI torque requirement..
  • NO-SLIP GRIP: This telescoping 1" drive ratchet was built to last. It has a knurled handle that ensures a firm non-slip grip so you can get the job done with all the torque you need!.
  • QUALITY HAND TOOLS: We've got all of your tool needs covered with our wide array of of lights, ratchets, tool organizers, 12v battery tools, pliers & so much more!.
  • INNOVATION AT ITS FINEST: We make high quality hand tools & accessories, tool organizers, ratchet sets, LED flashlights & work lights. We specialize in tools for battery, heating, electirical, HVAC, construction, professional tradespeople & home DIY'ers!.
  • THE EZRED DIFFERENCE: Leading with innovation, our focus is to design, manufacture & deliver the most functional & durable professional grade tools & lights. Get the job done with EZRED tools!.
Check Stock

GEARWRENCH 12 Pt. Ratcheting Combination Wrench, 19mm - 9119

  • Leading manufacturer of high-quality tools.
  • Made to withstand even the most demanding jobs.
  • International Renown for our diverse range of products.
  • All our products have been designed with the requirements of the professional in mind.
  • Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
  • Sleek head design enables access to tight spots where a ratchet will not fit.
  • Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock

Learning Resources New Sprouts Fix It! My Very Own Tool Set - 6 Pieces, Ages 2+ Toddler Learning Toys, Develops Fine Motor Skills, Toddler Tool Set, First Tool Box, Kids Tool Set

  • THEIR FIRST REAL TOOL SET: Get the little ones off the gadgets and give them a head start learning practical DIY skills with adults. Using real metal tools, not toys, the Hi-Spec Blue Kids Tool Kit Set with Tool Belt is for boys and girls to fix, build, and construct in the home or yard.
  • METAL TOOLS FOR BEGINNERS: Carefully chosen for young starter’s usage, these are real tools selected from adult DIY hand tool sets. Everything needed to hammer, screw-drive, clamp, and measure NB. Ideally suited for ages 6 years and above with adult supervision.
  • FOR YOUNG BUILDERS: Not throw-away plastic for pretend play - even the grown-ups would want to borrow these tools. A claw hammer to put-up frames and decorations, full-size screwdrivers to open and assemble, a tape measure to mark and position, and much more.
  • PROPER TOOL BELT: Put all tools in the brightly coloured handyman's tool belt with its pockets, holders, and a hammer clasp. Made of hard-wearing splash-proof fabric, it adjusts to child sizes of waist 56-69cm and fits with a simple to use clip.
  • DIY SAFETY: A pair of cool-looking adjustable length dust glasses, with cloth pouch, to keep specks and particles out. And full-leather workman’s gloves to protect fingers and hands from mishaps.
Check Stock

MPF Products USB Cable Cord Charger Replacement Compatible with WMC-NW20MU Select Sony Walkman MP3 Players (Compatible Models Listed in Description Below)

  • The CPA-9C cassette adapter is ideal for listening to your CD or MP3 player through your car's in-dash cassette player..
  • Plug the jack into your player and the cassette tape into your car's cassette deck to start enjoying your tunes while your drive..
  • Compatible with decks that make you insert the cassette with the tape opening facing the side..
  • Mini-plug inserts into your portable MP3 or CD player's headphone jack..
  • Silent mechanism reduces mechanical noise on the road. Self-adjusting spring-loaded head maintains optimum contact with your cassette deck's tape head..
Check Stock

Meetory 8 Pieces T-Shirt Alignment Ruler 2 Teflon Sheets Soft Tape Measure and 2 Rolls of Tape T-Shirt Measurement Ruler Guide for Heat Press Heat Transfer Vinyl Screen Printing

  • Package include: 8 T-shirt alignment tools, 1 measuring ruler, 2 Teflon sheets and 2 rolls of tape. Plenty of practical tools can help you sewing and....
  • T-shirt ruler: T-shirt measure ruler guide tool is made of reliable and durable PVC, which is hard to break and twisted. Besides, it can be reused.....
  • Easy to use: The T-shirt ruler with a clearly numbers, and it is easy to read with any shirt color. Just align the ruler to the collar of the T-shirt,....
  • Teflon sheets and tape: The sublimation teflon board is made of high-quality glass fiber, which is heat-resistant and waterproof. The excellent....
  • Wide applications: A useful measuring tool, suitable for fashion artists, designers, tailors, housewives who want to make some changes and fashion.
Check Stock