ReviewsTaper Bore Sprockets

Fowler 54-646-401-0 Electronic Dial Bore Gage Set with 1.4–6\/35-150mm Range

  • Accurate Measurements: The bore gage features an electronic indicator with resolution of 0.00005"/.001mm and measuring depth of 9 inches.
  • Durable Construction: This electronic indicator provides both inch and metric readings.
  • two-point contact system is used to detect geometry problems such as ovality and taper.
  • carbide-tipped contact points provide extended wear and improved abrasion resistance.
  • The easily adjustable bore gage is self-centering and includes a 2-inch contact extension holder.
  • Minimum Hold Feature: This electric gage locks and holds the bore size as the gage is rocked within the part to be measured.
  • Set Includes: A storage case, 2 batteries, 15 measuring anvils, 4 spacers and an instruction manual.
Check Stock

Kimble 17132F-5 5mL Class A Micro Burette, with Integral Reservoir and PTFE Stopcock

  • Precision bore burette has a side filling tube with a separate stopcock to control liquid within the permanently attached reservoir, approximately 70mL in capacity.
  • Reservoir stopper is medium length, standard taper, 14/22.
  • Calibrated to the accuracy requirements found in ASTM Specification E696.
Check Stock

LiftMaster Gear and Sprocket Assembly 41A5658 - G2595

  • The ROP Shop replacement Gear & Sprocket Kit for LiftMaster 1245LK, 1250, 1255, 1255R, 1260 Garage Doors.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth. Refer to images 2 & 3 for more information.
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • Compatible with Residential Chamberlain, Liftmaster, Sears Craftsman, Master Mechanic and Garage Master, 1/2, 1/3, 3/4 HP chain drive models manufactured 1984 to present.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
  • Not compatible with Sears openers made before 1984 - body color of powerhead unit: brown, green, or yellow.
Check Stock

Nylon Sleeves, Type M-28, 34-Teeth, M-Style, Flexible Shaft Couplings (1 Each)

  • For use with Martin taper bushed, QD and stock, and finished bore roller-chain style couplings (sold separately).
  • Aluminum provides corrosion resistance and minimal additional weight to the coupling.
  • Synthetic rubber seals along the bore keep lubricants contained and keep contaminants out.
  • Two halves to facilitate installation, and has gaskets between the halves to prevent lubricant leakage or debris intrusion between the halves.
Check Stock

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

Beslands Dial Indicator Bore Gage Gauge, Stem Length 6'', Cylinder Dial Bore Gage with Carbide anvils (2\-6\ Range)

  • Dial indicator includes jewel bearing, including ABS storage box.
  • Ultra-precision bore gauge The deep bore gauge with a depth of 10 inches allows users to measure out-of-round conditions and cylinder taper without having to disassemble the piston-this gauge can reach critical wear areas of the cylinder block..
Check Stock

Neoteck Digital Indicator Bore Gauges, 2\-6\/0.0005\ Deep Engine Cylinder Measurement

  • Super Precision Deep Measuring Bore Gauge - Two-point contact is used to detect geometric diameter measurement problems such as ovality and taper.
  • Professional Quality - Self-centering measuring extended heads, chrome plated handle and good quality ABS storage case.
  • Zero Setting before using- Before measuring, be sure to adjust the pointer of the digital dial indicator to the “0” setting and select the measuring head of the appropriate size for measurement.
  • Digital Dial Indicator - Range: 0 ~ 12.7 MM (0 ~ 0.5 inch).
Check Stock

Shankly Dial Bore Gauge 0.001m Deep Engine Hole Cylinder Measurement Inside Micrometer Gage Cylinder Tool Kit 2m to 6m Comes with Carrying Case for Bore Measure

  • ✅ ACCURATE & PRECISE: This dial bore gauge is primarily used by machinists to precisely measure the inner diameter of bores in motor engines. When measuring cuts or hole sizes, a dial bore gauge's speed and accuracy can save a lot of time.
  • ✅ MEASURING RANGE: With this dial gauge, you can easily and accurately measure cylinder bores for taper. They have a measuring range of 2-6m and 0.001m and are equipped with a self-centering guiding protective bridge for dependable and repeated use.
  • ✅ WELL-CONSTRUCTED ENGINE TOOL: A dial bore gauge that is built to be irreplaceably reliable and precise, allowing for more efficient and trouble-free repairs. This premium bore gauge is built to last.
  • ✅ HEAVY-DUTY CARRYING CASE: Our bore gauge comes neatly in a tidy blow molded case with a built-in handle and slide latches that will make it simpler for you to keep track of each tool and arrange the entire set.
  • ✅ SATISFACTION GUARANTEED: We stand by the term "quality," and all of your items will arrive in good condition when you order from Shankly. Please contact us if you have any questions about your purchase. We will gladly assist you.
Check Stock

Gekufa Go Kart Sprocket for 40/41/420 Chain, 60 Tooth Sprocket for Go Karts and Mini Bikes

  • [COMPATIBILITY] This Go Kart Sprocket designed with 60 Tooth, works with 40/41/420 Chain for Go Karts and Mini Bikes.Note:This is a 9-3/4" sprocket and please double check what size you need.If this one is too big for you,we also have 8" sprockets B08MX2W7NF..
  • [PREMIUM QUALITY] Made of high-quality metal, durable to use..
  • [PERFECTLY FIT] Great replacement for a proper fit and easy installation..
  • [PRODUCT DIMENSIONS] 9-3/4" diameter, 60 tooth sprocket with a 2-1/8" bore.
  • 8 x 3/8" mounting holes, spaced 1-1/4" apart..
  • [BUY WITH CONFIDENCE] This 60 Tooth Go Kart Sprocket comes with 6 months warranty. For any reason you're not completely satisfied, you can ask for a replacement or full refund..
Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

  • Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

Dial Indicator Bore Gage 2' - 6' Range 0.001' Precision, Industrial Deep Engine Cylinder Measuring Tool with Carbide Anvils and Jewel Bearing, Silver Grey

  • Precise Measurement: The measuring range of cylinder dial bore gauge is 2″-6″, the accuracy is 0.001″.
  • High Accuracy Industrial Measurement: Users can measure cylinder out-of-roundness and taper without removing the piston with bore measurements up to 10″ deep – this diameter gauge can reach critical wear areas of the cylinder.
  • Sturdy and Wear-Resistant: The engine cylinder measuring tool is made of stainless steel, the measuring plunger contains a carbide tip, and the dial contains gem bearings, which effectively improves the durability of the cylinder inner diameter dial indicator.
  • High-Quality Probe: Sealed probe, glass mirror cover, waterproof and dustproof, insulated grip, effective heat insulation, clear scale, allowing you to see the data more intuitively.
  • Package: Contains all necessary spacers, interchangeable extensions and ABS storage case, easy to use and easy to assemble. If you encounter any problems during the use of our dial indicator bore gage, please feel free to contact us, we will solve the problem perfectly for you.
Check Stock