ReviewsTaper Boring Machine

Pointer Knob, 1-1/8, 1/4X1/2 PH, 8-32 SS

Made from alloy steel 5155 with heat treat to RC 56-58.
Head Diameter?0.747" Head Angle ?15° Drawbar Thread Size?5/8"-11 Machine Taper Size ?CAT40 Neck Diameter?0.549" Hole?0.281" Pilot?0.641" Overall Length?2.001" Shoulder To Head?0.787" Shoulder To End?1.024".
High quality black oxide finish to ensure long enduring tool life.
Each retention knob is individually magnetic particle tested to ensure free of crack.
Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob.

Check Stock

TECHTONGDA 8X31” Precision Metal Lathe Variable Speed Bench Lathe 900W Brushless Motor DIY Mini Lathe Wood Lathe 110V

[Professional Lathe]: Techtongda lathe is used for turning, facing, drilling, boring and turning thread. Also can be used for precision parts processing, sample processing and model processing. With extensive use, simple operation and extensive processing..
[900W Brushless Motor]: The newly upgraded 900W brushless motor not only gives more power but also saves you the trouble of replacing the brush..
[All Metal]: All the gears are made of metal and the spindle is supported by precision taper roller bearing. High quality materials make its service life longer..
[Safety First]: The lathe is equipped with emergency stop switch and overload protection device, which can better protect the operator in emergency..
[Infinitely Variable Speed]: This lathe allows both forward and reverse, with the spindle speed can be adjusted in the range of 50-2500rpm which give you the convenience to process the workpiece at will..

Check Stock

LINCOUNTRY LED Flameless Short Taper Candle Battery Operated with Timer Flickering Flame, 4.7inch White Candlestick,Dripless Battery Operated Window Candle Halloween Christmas Home Wedding Decor,2pcs

FLAMELESS TAPER CANDLES WITH TIMER:these black flameless taper candles flicking is elegant white Taper candle with timer, battery operated flickering taper candles warm light continuously flickering make them look like real candles,led taper candles with timer are beautiful and realistic.
TAPER SHORT CANDLES BATTERY OPERATED WITH TIMER:These battery flicking taper candles made of plastic,Battery operated flickering taper candles Measures is H 4.75 x D1 Inch, each candle uses 2 AA batteries ( Not included ), tighten or loose the cap on bottom of the candle for ON/OFF, timer setting the candle to stay on for 6 hours and then go off for 18 hours.
BLACK TAPER CANDLES BATTERY OPERATED FLICKERING FLAME:These battery flicking taper candles made of plastic,Battery operated taper candles with timer led candles battery operated with timer flickering base of candle is tapered, perfectly fit standard taper holder and taper accessories.
TAPER TIMER CANDLES BATTERY OPERATED WITH TIMER:flameless LED lights, zero carbon emission, halloween led taper candles white flameless taper candles safe for kids, pets, seniors, Perfect for home décor....

Check Stock

Amazon Brand - Denali 14-Piece Drill and Tap Combo Set

ideal for quick, easy thread cutting and hole making.
Includes a 14 piece set with 1/8-27NPT Pipe, 6-32 Taper, 8-32 Taper, 10-24 Taper, 10-32 Taper, 12-24 Taper, 1/4 - 20NC, Taper 1/4 - 28NF Taper, 5/16 - 18NC Taper, 5/16 24 NF Taper, 3/8 - 16 NC Plug, 3/8 - 24 NF Plug, 7/16 -14NC Plug and 1/2 -13NC Plug, 1-case.
Hardened, precision ground and polished surfaces with a rust resistant satin finish ensure long lasting strength.
Product dimensions: 5.12x2.95x0.83 inches(LxWxH, Carry Case).
This product is covered by the Accessories 1-Year Limited Warranty.

Check Stock

TJATSE 1/2\ Round Shank Boring Bar Set Premium Indexable Carbide Inserts with Boring Bars CNC Turning Lathe Tool Set for Metal Lathe - 4 Pieces/Set

【Industrial Quality Boring Bar Set】: TJATSE Boring Bar Set are made of Chilled Steel bar holders combine with Tin-coated carbide inserts, sturdy and durable for long time use. Great for semi-finishing on the existing hole cutter, fit boring machine, lathe machine..
【Round Shanks Bar Holder】: Designed with round shank holders which allow the operator to set positve or negative rake, chip breaker eliminates long stringer chips. Positive rake 90-degree lead. Supplied with wrench..
【Indexable Inserts Included】: Come with TCMT21.51 inserts and it can be indexed, when it is dull use another sided, a new cutting edge may be presented by simply indexing the insert. It is versatile and economical..
【Easy Organization And Storage】: Easy reference guide for insert number, screw and other accessories is printed on the tool shank, and The entire turning tool set is contained in a alumium carrying case that protects and organizes each tool and stacks and stores easily..
【TJATSE BRAND WARRANTY】: TJATSE provides an one-year no questions asked replacement warranty and friendly customer service. We aim to provide solutions for industry through both our products and professional service..

Check Stock

OSCARBIDE 1/2'' x 7''Indexable Boring Bar,Right-Hand Sclcr Boring Bar with Carbide Insert CCMT09T304(CCMT32.5),1 Piece

Sclcr Boring Bar 1/2" Shank Diameter, Overall Length 7”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.

Check Stock

WEICHUAN 11.5

CANDLESTICK HOLDERS: -- All matched: The measures of glass candlestick holders is 1.9W 2.5H approximately 0.9(candle hole diameter). Suitable for regular taper candles, flameless LED candle for candlesticks which diameter less than 0.9 (Candles not included)..
TAPER CANDLE HOLDERS:-- Decorating occasion: Letine taper candle holders are perfectly suitable for windowsill and table decoration for wedding and Valentines, Christmas, Thanksgiving, sweet birthday party. Thanks to the clear pattern of the crystal candlestick holders, taper candle holders decorate with taper candles in different colors to look special..
CANDLESTICK HOLDERS SET: -- Make it yours: The intaglio design among candlestick and the grain that protrude comes to make taper candle holders become very stylish, the grain of candle cup bottom makes whole candle holders look more three-dimensional. Round base provide firm support for candlestick holders, stable and safe for your use..
TAPER CANDLE HOLDERS BULK: -- Safety: Each clear candle holder features a thick glass wall and weighted base to prevent it from overheating or cracking. Bulk of 12 taper candle holders comes safely packaged in individual compartments inside a protective box with bubble bags to avoid damage..

Check Stock

DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More on Radial Arm or Table Saw

NO MORE GUESSING: The DCT Taper Gauge Jig Tool Kit Set for Tapering (Angle Cutting) Wood Tapered Legs and More allows for complete workpiece control when making taper or angle cuts on any radial-arm or table saw.
Making a taper on a piece of wood is difficult with only a table saw and dangerous attempting free-hand, so this jig with a removable and adjustable stop allows you to make tapers safely and accurately.
Easily taper table legs or use for construction and remodeling.
VARIOUS TAPERS APPLICATIONS: Reversible for left-hand or right-hand operation so anyone can cut out items like tapered table legs, tapered waste baskets, magazine racks, molding cuts, and dado cuts.
The thumb wing nut enables fine adjustment of the jig for all applications up to 24 inches (length of jig legs).
ACCURATE MEASUREMENT: Includes an easy-to-read graduated scale that measures up to 3 inches per foot or 15 degrees of taper.
Gauge allows you to make adjustments to change the angle to your fence so you saw safely with a consistent and reproducible taper.
EASY TO USE: Mark your piece of wood with the angle cut you want to create, set the taper jig next to the piece of wood and measure the distance from the marked angle to the taper jig on both the small and large sides of the ....

Check Stock

OSCARBIDE Indexable Boring Bar 3/4 x 10 Overall Length,Right-Hand Sclcr Boring Bar S12S-SCLCR3 with CCMT09T304 CCMT32.5 ,1 Piece

Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
Replacement insert for this kit ,please search the Asin of this item:B07W7PVWR1 to buy it.

Check Stock

Chicago Latrobe - 53848 110S High-Speed Steel Taper Shank Drill Bit, Black Oxide Finish, #3 Morse Taper Shank, 118 Degree Conventional Point, 3/4\ Size

Carbide tipped taper shank drills feature heavy-duty construction.
Heat treated body for optimum wear resistance.
Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

Check Stock

CANDWAX 8 inch Taper Candles Set of 4 - Dinner Candles Dripless - Tall Candles Long Burning Perfect for Dinner Party or Christmas Candles Decor - Dark Blue Candles

Full colored candles - We do not save on the production of Candwax navy dripless taper candles. So you can be sure that we do not paint taper candles just from the outside. Our 8 inch tapered candles are completely colored inside, when they start to burn you will not see white paraffin inside our taper candles dark blue..
Smooth and soft flame - Forget about flashes and ever-fading long candles. Thanks to well-checked production technology, our 8 inch taper candles do not drip and leave no trace of wax. 8 inch royal blue taper candles have natural cotton wick inside thanks to which the flame is smooth and soft, it’s a real pleasure, just believe us. Dripless candles is the right decision to keep your house clean..
Carefully made - With care and attention we make navy blue taper candles, which you can use as dinner candles. Have an evening in the bosom of your family with tapered candles navy by Candwax. And you will feel how soulful and cozy your evening is. Our royal blue taper candles are long burning up to 10 hours depending on their size - 8 inch taper candles have 6 hours of burning time..
Unscented candles- Candwax emergency candles long burning are without any smell, what is a real advantage because they will be suitable for every occasion and ....

Check Stock