ReviewsTaper Measurement Gauge

MICROJIG GRR-RIPPER TJ-5000 Microdial Tapering Jig For Table Saws, Yellow

  • The Most PRecise, Versatile Tapering Jig.
  • The MICRODIAL gauge locks in exact incremental taper angles.
  • Precision tapered cutting as accurate as 1/8 of degree.
  • Works with the GRR-RIPPER 3D PUSHBLOCK system for ultimate safety and control.
  • Set your taper angle by degree or rise and run for last cutting.
Check Stock

Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand..
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common..
  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence..
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks..
  • Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instru....
Check Stock

NewkeepsR 18G 1.0mm 316L Steel Calor Style Taper Insertion Pin for Ear/Nose/Eyebrow Stretcher Body Piercing Stretching Kit Assistant Tool

  • Size: 18ga(1.0mm),2.0 inches length (50mm). The large end is hollow( "No Thread Inside" will NOT screw onto your externally threaded jewelry,Just....
  • Function:① Stretch/enlarge hole for gauge modification purpose,gauge up size from 20g to 18g.(Used some alcohol during this process) ② Used for....
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into....
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time....
  • Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the size that suits you best..
Check Stock

NewkeepsR 2PCS-16G(1.2mm) 316L Steel Calor Style Taper Insertion Pin for Ear/Nose/Navel/Nipple/Lip/Eyebrow Stretcher, Body Piercing Stretching Kit Assistant Tool

  • ... helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 18g to 16g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk a bit or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time to adjust. ③ Can be autoclaved and reused as steel taper more comfortable and durable.④ Why no thread inside the hole? as your external thread bar isn't made from our shop,I'm not sure if both end threads match,so holding bar will be better..
  • 316L Implant Grade Stainless Steel Material. Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the size that suits you best..
Check Stock

NewkeepsR 2PCS-14G 1.6mm 316L Steel Calor Style Taper Insertion Pin for Ear/Navel/Nipple/Lip/Tongue Stretcher Body Piercing Stretching Kit Assistant Tool

  • ... helps prevent slipped and cover external thread to avoid injuries while insert.Protect skin from external threads scratch. ② Style B Function: Stretch/enlarge hole for gauge modification purpose,gauge up size from 16g to 14g.(Used some alcohol during this process).
  • Advantage: ① More safe and smooth than acrylic taper which hold bacteria and difficult to heal. ② Painless and safe when piercing bar push into hole as the large end cover external thread. ③ Doesn’t irritate as our taper grow from small to large gradually.④ Reinsert/reopen a piercing hole that had shrunk "a bit" or begin to close up,Actually don't need go back to piercer.⑤ It's not as needle sharp but pointed enough..
  • Tips: ① Go slow when stretching,or using some lubricant,it glided through smoothly and painless. ② Push piercing bar through slowly to allow time to adjust. ③ Can be autoclaved and reused as steel taper more comfortable and durable.④ Why no thread inside the hole? as your external thread bar isn't made from our shop,I'm not sure if both end threads match,so holding bar will be better. ⑤ Can't fit to any threadless piercing jewelry..
  • 316L Implant Grade Stainless Steel Material. Insertion Taper's option with 20g/18g/16g/14g/12g/10g/8g,Please choose the siz....
Check Stock

Elitech PG-30 Blue Digital Low Pressure Gauge for HVAC Refrigerant with Backlight -14.5~500 PSI 1/8” NPT

  • ...fold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
  • 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
  • 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure-evaporation temperature database, also calculate the subcooling superheat, to facilitate the direct reading of operating process data. Also, it tests the percentage of vacuum measurement..
  • 4.【Durable and Multifunctional HVAC Manifold Gauge Set】The ....
Check Stock

Vbestlife Air Pressure Gauge, 30PSI Single Barometer with High Pressure Hand Pump, Kayak Accessories for Rubber Dinghy Inflatable Boat Measurement

  • [Accurate Measurement ] --- The measurement range is 0-2 BAR or 0-30 PSI, meets most of the air pressure measurement of inflatable boats. Accurate measurements and clear hands make it easy to read pressure data..
  • [Reliable] --- The air pressure gauge is marked with PSI and BAR units and is reliable to use. It can used with high pressure hand pumps, air pumps or air valves..
  • [Detect Air Pressure] --- Check air pressure drop changes at any time to identify potential problems in the rubber boat, easy to install and operate..
  • [Quality PVC Materials] --- This air pressure gauge is made of high quality PVC material, sturdy and durable, suitable for inflatable boat, rubber boat, support plate, etc..
  • [Scope of Application] --- This PSI air gauge is suitable for sports: outdoor projects, rafting, water skiing, surfing..
Check Stock

Painful Pleasures Threaded Taper for Ears Piercing and Stretching Kit For Navel Nose and Other Areas Medical Grade Stainless Steel 1 Inch Long 1.2mm at Thickest Point 16g

  • MADE FROM STAINLESS STEEL - This threaded taper is made from polished, 316L ASTM F-138 Implant-Grade Stainless Steel. This helps to prevent irritation and can be easily cleaned..
  • SINGLE OR MULTIPLE USE - Sold individually. These ear tapers can be autoclaved for multiple insertions or disposed of after a single use. Each one is sealed and wrapped..
  • TAPER SIZE - Measures 1-inch long and 1.2mm at its thickest point. The taper gauge offers internal threading of 0.9mm. Can be used on navel, nipple, and other areas..
  • FOR THREADLESS OR INTERNALLY THREADED JEWELRY - Use the pin hand taper for a hassle-free install of 16g threadless or internally threaded jewelry in one, swift motion..
  • VERSATILE - Ideal to use as a piercing and ear stretching kit. Or to stretch out and change jewelry in existing nose piercings, nipple piercings, belly piercings, lip piercings and eyebrow piercings..
Check Stock

3 Pieces Stainless Steel Feeler Gauge Dual Marked Metric SAE Offset Valve Thickness Gauge 32-Pieces/ 26-Pieces/ 16-Pieces Feeler Gauge for Measuring Width Thickness

  • Feeler fauge sets: package contains 3 pieces of feeler gauge, including 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), 26-pieces feeler gauge (measurement: 0.0015-0.025 inch/ 0.04-0.63 mm) and 16-pieces offset feeler gauge (measurement: 0.005-0.02 inch/ 0.127-0.508 mm).
  • Adequate size and style to meet your needs, you can choose appropriate feeler to use according to the actual needs.
  • Quality material: made of 65 manganese steel, each feeler gauge is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
  • Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
  • Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
  • Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corr....
Check Stock

OEMTOOLS 24807 Smart Tire Pressure Gauge, Multifunctional Programmable Digital Tire Pressure Gauge, PSI Tool, Tire Deflator, LED Flashlight, Backlit LCD

  • CONVENIENT AND ACCURATE: Our tire pressure gauge for cars quickly and accurately measures tire pressure.
  • Air Gauge Tire Pressure Measurement Range: 5 to 100 PSI (0.3 to 6.9 bar / 0.4 to 7.0 kg/cm).
  • Press the unit button to select PSI, bar, kg/cm.
  • PROGRAMMABLE SETTINGS: This digital air pressure gauge is equipped with a system that stores up to four (4) tire pressure air gauge readings.
  • Last programmed setting remains available after the digital tire gauge shuts off.
  • DEFLATES TIRES: The digital pressure gauge also features a tire deflator function for easy tire pressure adjustment.
  • Green tire deflator button on the back of this electronic tire pressure gauge releases pressure.
  • LOW-LIGHT FUNCTIONALITY: This air pressure tire gauge features an LED flashlight and a backlit LCD screen.
  • This tire pressure gauge with light sensitivity allows you to easily check tire pressure while on the road at night.
  • PRODUCT SPECIFICATIONS: Operating temperature: -4 degrees to 122 degrees Fahrenheit.
Check Stock

Beslands Dial Indicator Bore Gage Gauge, Stem Length 6'', Cylinder Dial Bore Gage with Carbide anvils (2\-6\ Range)

  • Dial indicator includes jewel bearing, including ABS storage box.
  • Ultra-precision bore gauge The deep bore gauge with a depth of 10 inches allows users to measure out-of-round conditions and cylinder taper without having to disassemble the piston-this gauge can reach critical wear areas of the cylinder block..
Check Stock