ReviewsTaper Pipe Thread Dies

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check Stock

Steel Dragon Tools® 12-R Manual Ratchet Pipe Threader Kit 418 Oiler 460 Chain Vise 2A Cutter

  • Steel Dragon Tools 12R Manual Ratchet Pipe Threader Kit..
  • SDT 12-R will thread 1/2-inch to 2-inch pipe..
  • SDT 12-R comes with ratchet head, handle, steel tool box, six (6) die heads, and six (6) alloy dies..
  • Includes a Steel Dragon Tools 418 Oiler Bucket, 460 Tripod Chain Vise, and 2A Pipe Cutter..
  • Will work with RIDGID 700 Power Drive Pipe Threader 41935..
Check Stock

Lighthouse quality tools - M14X1 LH HSS Adjustable Round Threading Die

  • Fits RIDGID NPT universal machine die heads 504A, 711, 713, 811A, 815A, 816, 817 and 842.
  • High-Speed threading die for stainless steel.
  • Threading dies have capacity of 1/2-inch to 3/4-inch.
  • Right-Hand, NPT (National {American} Pipe Tapered) thread.
  • RIDGID 47765 NPT dies have 14 TPI (Threads Per Inch).
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

GASHER 4PCS Metals Brass Pipe Fitting Hex Nipple Brass Tone 1/4 x 1/4 NPT Male Thread Pipe 1/4Inch x 1/4Inch NPT Female Thread Pipe

  • 1/4"Female NPT thread parts on both ends for connecting 1/4" Male NPT thread parts together,1/4" Male NPT threads for connecting to Female threaded....
  • Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • The kit include: 2pcs x 1/4" x 1/4" NPT Male Nipple.
  • Durable solid brass construction is resistant to corrosion and long-lasting. Operating temperature range of -65 to +250 degrees F..
Check Stock

RYOBI 18-Volt Cordless PVC and PEX Cutter (Tool Only) P593 (Bulk Packaged)

  • 【Professional Design】This electric pipe threader is designed for pipe thread processing. Equipped with 2300W pure copper motor, which has strong kinetic energy, stable and efficient operation, can realize fast threading, effectively improve threading efficiency. And there are 6 kinds of dies with diameters of 15, 20, 25, 32, 40, 50mm (1/2.
Check Stock

Redding 9mm Luger Taper Crimp Die Straight Wall Case

  • A taper crimp gently tapers tighter and tighter to hold the bullet in place.
  • This doesn't work the case mouth as hard as the roll crimp and it doesn't affect the overall length.
  • Redding Taper Crimp Dies are designed for handgun cartridges which headspace on the case mouth in which conventional roll crimping is undesirable.
  • Available for some revolver cartridges for those who prefer the uniformity of a taper crimp.
  • The die has standard threads (7/8" x 14tpi), so can be used on most reloading machines. Case lube is not required on crimp dies.
Check Stock

1/4-18 NPT HSS Taper Pipe Tap, High-Quality High-Speed Steel 6542, Used For Conventional Machine Tapping Or CNC Tapping, Can Tap Steel And Stainless Steel.

  • 5/8" - 14 HSS American National Standard Taper Pipe right hand thread tap.
  • 5/8" is nominal pipe size - the actual thread dimension is greater than 5/8".
  • The angle between the sides of the thread is 60 deg.
Check Stock

Toledo Pipe 300 15682 Complete Pipe Threading Machine, 38 RPM, Aftermarket 811A fits RIDGID 300 T2 418 with Accessory Kit

  • Toledo Pipe Tools is proud to give you an alternative quality model 300 Pipe Threading Machine..
  • This workhose will be your backbone for any job you throw at it..
  • Offering great mobility with quick tear down, you can thread on site or in your shop..
  • The Model 300 comes standard with a Toledo Pipe 811A Universal Die head, HSS NPT Dies ranging 1/2"-2".
  • Heavy duty foot pedal, quick colapsing stand, 418 oiler bucket and Accessory kit..
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock