ReviewsTaper Shank Side And Face Cutters

Drillbit Taylor (Extended Survival Edition)

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

Drill Bits (feat. David Slusser)

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

This Is Not A Drill: An Extinction Rebellion Handbook

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

3/16

  • Clamping Range: 3/16" - 3/4". (PLEASE NOTE THE DRAWS DO NOT CLOSE ENTIRELY TO ZERO RATHER IT CLOSE TO 3/16").
  • Shank Size: 2MT (Morse Taper #2) PLEASE NOTE THE TAPER IS MT2 (SPINDLE HOLE DIA OF DRILL PRESS SHALL BE 0.70'. ).
Check Stock

Michigan Drill 200 Series High-Speed Steel General Purpose Drill Bit, 2 Morse Taper Shank, Spiral Flute, 118 Degrees Conventional Point, 19/32\ Size (Pack of 1)

  • Size: 1-1/4, Material: High Speed Steel, Finish: Black Oxide, Flute Length: 7-7/8, Overall Length: 13-1/2, Shank Size: 4MT, Shank Type: Taper, Style: Taper Shank, Cutting Angle: 118, Point Type: Conventional Point, Number of Flutes: 2, Cutting Direction: Right Hand.
Check Stock

LANTRO JS MT5 to MT2 Morse Taper Drill, Hardness Wear Resistance Taper Drill Sleeve Reducing Adapter for Lathe Milling

  • MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
  • SPECIFICATIONS: Accuracy: 0.015mm, Hardness: 50 HRC.
  • QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
  • APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
  • QUALITY INSPECTION: Each product has been strictly tested before leaving the factory, and rejects defective products.
Check Stock

Accusize Industrial Tools R8 to 3/4'' Weldon Shank for Annular Cutters use on Bridgeport Milling Machine, Mc08-0034

  • R8 to 3/4'' Weldon Shank Arbor for Milling Machine.
  • for Annular Cutters use on Bridgeport Milling Machine.
  • Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shank.
Check Stock

Morse Taper Sleeve Middle Sleeves Spindle MT2 to MT1 Drill Sleeve Reducing Adapter for Lathe Milling Industrial CNC Fixture Tool

  • High-S-peed Steel Material: This Morse taper sleeve is made of high-quality high-s-peed steel material, which is hard and durable. You don't have to worry about breaking during use, ensuring that it can bring you a better experience..
  • Refined Full Grinding: In the production process, each product will undergo several fine grinding treatments after processing. We ensure the best surface treatment to make it easier to operate and use..
  • Long Service Life: After quenching, the cone sleeve components have very high hardness and wear resistance. They will not be easily damaged during use, and the service life is very long..
  • Scope of Application: Exquisite adapter, suitable for lathe milling, specially designed for the use of Morse taper shank, taper shank drill, suitable for CNC fixture..
  • Performance Parameters: The diameter of this taper sleeve is MT2-MT1, hardness: 50 HRC, accuracy: 0.015mm..
Check Stock

Wood Plug Cutters, 8 Pcs Straight and Tapered Plug Cutter Set 1/4', 5/16”, 3/8', and 1/2' Taper Cutting Tool Cork Drill Bit Knife Set with 1/4 Hex Shank

  • Set of 8 Wood Plug Cutter Kit: 4 four-tooth chamfered tapered wood plug cutters and 4 standard straight plug cutters in 1/4", 5/16”, 3/8", and 1/2" diameter..
  • Quick Change Shank: Our dowel cutters equipped with 1/4" quick change shank, which is Universal size, compatible with all 1/4" Quick Change Chucks in drill press..
  • For Better Woodwork: Chamfered Cutters for tapered plugs to conceal screw head and countersunk holes, and to match wood grain.
  • Standard plug cutters for removing imperfections in workpiece..
  • Sharp and Neat: Sharp clean and smooth cutting for round plugs for hiding screw heads, making decorative plugs.
  • Important Tips for Use: In order to have a perfect diameter, a drill press is needed due to the nature of plug cutting. The Plug Cutters are not for hand drills, it is going to wander, be sloppy, or cutter break..
Check Stock

Rockwood Air Hammer 4 Chisel Set Kit Requires 4CFM

  • High-Performance 4500 Bpm (Blows Per Minute) Design For Quick And Efficient Operation..
  • It Accepts Any Standard 0.401 in. Parker Taper Shank Air Hammer Tool Bit And Includes Four Of The Most Popular Tool Bit Configurations..
  • Shank Capacity: Standard 0.401 in. Inch Parker Taper & Bpm: 4,500 Free Speed & Air Consumption: 4 Cfm [113 L/Min] 90 Psi [6.2 Bar] & Max. Operating Air Pressure: 90 Psi [6.2 Bar] & Inlet Thread Size: 1/4 in. Fnpt.
Check Stock

Qualtech 1-1/2\ HSS 4MT Taper Shank Drill Bit, DWDTS1-1/2

  • Cobalt taper shank drills are made of heat resistant cobalt..
  • Engineered with heavy-duty construction to perform well in tough, hard-to-machine materials..
  • Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • Designed to perform in a broad range of materials in the iron and steel families.
Check Stock