ReviewsTaper Tap Set

aiyun 6 Pack Titanium Combination Tap Drill Bit Set, Thread Tap Drill Bits Set M3-M10 Metric Drill and Tap Set

  • ...nium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund.
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ...Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting will affect the tapping and even break the tap..
  • ✅【QUALITY GUARANTEE】 We have carried out strict quality inspection and control on each drill tap bits set before leaving the factory, and the pass rate is above 99.99%. If you have any usage or quality problems, please feel free to contact us through Amazon..
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

aiyun 6 Pack Drill Tap Metric M3-M10 Tap Set Metric Drill Taps for Steel Aluminum, Sheet Metal and Other Hard Metal Thin Plates(HSS6542)

  • [What You Will Have] Set of 6 tap drill set metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5.
  • [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on aluminum, sheet metal and other hard metal thin plates, greatly save processing steps and time costs, improve working efficiency.
  • [Material] HSS6542 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • ...es: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
  • Easy to Carry - This drill tap bits set is equipped with a storage box, which is convenient to carry and helps to keep the drill bi....
Check Stock

Omninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees

  • High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
  • Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
  • Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
  • Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
  • Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check Stock

Hymnorq Metric HSS 4341 Combination Drill and Tap Bit Set of 6pcs – Including M3, M4, M5, M6, M8, M10-1/4” Hex Shank and Self-centering Split Point - For Tapping in Wood Plastic and Aluminum

  • Back tapered beyond tap to prevent thread damage from over-drilling.
  • Deburr/countersink also provided on bit beyond back taper.
  • Quick change adaptor included in both metric and standard kits.
  • All operation in one time with power drill saves labor and time.
  • Made from hardened high-speed steel vs. carbon steel for longer life.
  • Point is self-centering and eliminates the need for center drilling or center punching.
  • 6 sizes in one drill and tap bit set (M3, M4, M5, M6, M8, M10) to meet your diversified requirements.
  • Drill and tap bits have high quality hex shank to confirm strong connection to drill chuck. Ideal for hole drilling, tapping and deburring/countersinking applications in wood, plank, mild steel, copper, brass and aluminum metals.
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M6 Thread 1mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M6 x 1 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M4 Thread 0.7mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M4 x 0.7 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M2 Thread 0.4mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M2 x 0.4 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock