ReviewsTapered Carbide End Mill

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 6mm/0.23".
  • [Single Flute End Mills]: 5 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 3.175mm 1/8”.
  • [Single Flute End Mills]: 10 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • Offer a smooth cutting surface and chip clearing.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating

  • General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40..
  • Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible..
  • AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
  • Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
  • 35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its gr....
Check Stock

OSCARBIDE 1/8\Shank Ball Nose Carbide End Mills CNC Spiral Router Bits 2 Flutes Milling Cutter for Engraving Milling 3D sculpturing Roughing Acrylic Wood PVC Aluminum 10pcs

  • Ball Noze type,1/8" Shank X 1/8"Cutting Dia, 17mm Flute Length with 2 Spiral Flutes, Total length 38 mm.
  • Carbide Ball End mill Router bits are widely used For CNC Engraving, Milling, Roughing, Hollowing, 3D sculpturing purposes.
  • Due to the Great hardness of solid Tungsten carbide Material, it can easily remove materials like Wood, acrylic, PVC, cooper, aluminum, and steel, MDF, Resin, PCB.
  • Double Flute Spiral Design Improved the chip removal efficiency, surface mirror finish prevent chips from sticking to bits, which makes cutting more smooth.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

  • ★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
  • ★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
  • ★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
  • ★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
  • ★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

JIANXING 4mm 5mm 6mm Carbide Square End Mill Set,4 Flute Cutting Tools,HRC 55 Deg,Tialn Coating,Straight Shank Square Nose End Mills Cutter,CNC Router Bits,Widely Used in Alloy Steels/Hardened Steels(1 Set)

  • 【Cnc 4-Flute End Mill 】Adopt Modern Grinding Machine Equipment For High-Precision Grinding. Resists Wear And Offers High Cutting Performance.
  • 【Material】: Carbide With Tialn Coating For HRC 55 Deg, The Tialn Coating Has Stable Performance And Is Not Easy To Wear Under High Temperature Environment. It Has Higher Hardness And Wear Resistance And Excellent Cutting Performance.
  • 【The 35 degree helix angle design】 Greatly Improves The Production Efficiency, Sharp And Durable, Convenient For Chip Removal.
  • 【Applicable materials】 Include Ordinary Steel, Carbon Steel, Alloy Steel, Hardened Steel, Cast Iron, Etc. The End Milling Cutter Bit Is Suitable For Plane / Side Milling, U-Groove Milling And Other Additive Methods..
  • 【Package Included】: 1set (4mm+5mm+6mm) Carbide End Mill.
Check Stock

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
  • Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing:Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency:Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting:The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Kodiak Cutting Tools KCT133681 USA Made Solid Carbide Ball Nose End Mill, Coated, 4 Flute, 1/4\ Shank, 1/2\ Length of Cut, 2\ Overall Length, 1/4\ Diameter

  • Premium Sub-Micrograin Carbide End Mill Made In the USA.
  • 1/2" Flute Length (Length of Cut), 30 Degree Helix.
  • 1-1/2" Overall Length Center Cutting Carbide Endmill.
Check Stock