ReviewsTapered Countersink Sets

FTG USA Replacement Wood Countersink Drill Bit Set 3 Piece Same Size #6 9/64 Parabolic Flute Taper Point for Woodworking with Straight Shank - Tapered HSS M2 Drill Bit Only

  • ...flute space, dispersing chips away from the cutting edges more rapidly and increasing coolant flow. The parabolic spiral allows chips to flow up quickly leaving less damage to be corrected after drilling. Package contains 3 Piece Same Size 9/64" (#6 screw) Replacement Tapered Drill Bit Only Without Four-cutter Countersink, made to replace the 9/64” bit of #6 Countersink FTG 6810PRB.
  • FTG Parabolic Flute allows chips to flow up quickly leaving less damage to be corrected after drilling. Improved chip evacuation leads to a better surface finish in the hole. The parabolic drill tip can slip-on wood surfaces.
  • it is recommended to hold it rigidly and drill slowly until the tip grabs the material.
  • Higher Quality cutters FTG Parabolic Flute drill bits are manufactured from premium High Speed Steel M2 Grade 6542. Parabolic flutes are constructed with a wider flute shape for increased chip flow.
  • THIRD-PARTY TESTED High Speed Steel M2 countersink drill bit for wood with tapered drill bits. FTG Parabolic Flute drill bits are premium products, they are higher quality cutters. Due to their unique design, with improved chip extraction, FTG Parabolic Flute drill bits drill holes faster than other drill models.
  • Company Based in Bloomfield, NJ, USA. This product is....
Check Stock

Mesee 8 Pieces Wood Plug Cutter Drill Bit Set, Carbon Steel Straight and Tapered Tape Claw Drill Bits Woodworking Hole Saw Cutting Tool Cork Drill Bit 5/8″ 1/2″ 3/8″ 1/4″

  • The Plug Cutter Sets Include 4 Standard Plug Cutters & 4 Chamfered Ones. Dimension: 1/4″, 3/8″, 1/2″, 5/8″ (6.3mm/ 9.5mm/ 12.7mm/ 15.8mm).
  • Made of High-Quality Carbon Steel & Titanium-Coated | Durable, Sharp & Smooth..
  • Combined Claw & Barrel Design to Meet Any Demands..
  • Chamfered Cutters Make Tapered Plugs to Fill Countersink Holes..
  • Please Note: Fit for Bench Drill | We Suggest That The Speed Should Not Be Too Fast..
Check Stock

MulWark 82° Countersink Drill Bit Set incl. 5pcs Free Replaceable HSS Drill Bits for Wood｜3/8\ Quick-Change -Chamfered Adjustable Drilling Tool Kit on Pilot Counter Sink Holes for Woodworking- 5 Pack

  • HIGH DURABILITY - This countersink drill bit set is proudly made of classic High Speed Steel with excellent hardness of HRC 62-64.
  • it offers superior cutting power, high durability, and good abrasion resistance.
  • TRUE 82° ANGLE: These pilot screw countersinks bits are designed to match the most commonly used woodworking 82° screws you might encounter in the US and Canada.
  • SELF-CLEARING: Drill bits are precisely fit into the countersink sleeves and the two chamfered flutes enable faster operation and self-clearing drilling on the swarf, making perfectly sized and shaped holes.
  • PERFECT YOUR CARPENTRY - The 2 in 1 design turns two-step countersinking into one-step operation. This can make perfect countersink holes for both flush-set and plugged screws, without splitting the wood and enjoying neat projects with drill bit sets.
  • VERSATILE USE: Comes with 5 pieces of replaceable drill bits as a bonus and covers the full range of screw sizes. The countersink bits are ideal for bench drill, hand drill, and a conventional electric drill, perfect for wood, fiberboard, particleboard, plywood, plastic, PVC, rubber, etc...
Check Stock

Rocaris 23-Pack Woodworking Chamfer Drilling Tool, 6pcs 1/4\ Hex 5 Flute 90 Degree Countersink Drill Bits, 7pcs Three Pointed Countersink Drill Bit with L-Wrench, 8PCS Wood Plug Cutter, and Automatic

  • Package included 23pcs woodworking chamfer drilling tool, 6pcs 1/4" Hex Shank HSS 5 Flute 90 Degree Countersink Drill Bits, 7pcs Three Pointed High Speed Steel Countersink Drill Bit with One L-wrench for Wood Drilling or Woodworking Chamfer, 8pcs wood plug cutters drill bit set and 1pcs Automatic center punch for marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering.
  • 3/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material,used for tapered 1/4.
Check Stock

28 Pack Woodworking Chamfer Drilling Tools with a Case Rocaris Including 6 Countersink Drill Bits Set 5 Metric Step Drill Bit 7 Counter Sinker Drill Bit Set with L-Wrench 8 Wood Plug Cutter.

  • Cool Christmas Gifts for Dad:Are you searching for a suitable woodworking gift for dad? This Multi function drill tool kits can solve this problem, which Including countersink drill bits, L-wrench, wood plug cutter, step drill bit, center punch.
  • 5 Pack HSS Titanium Coating Step Drill Bits: 3/16-1/2'', 1/8-1/2'', 1/4-3/4'', 3/16-7/8'', 1/4-1-3/8'', suitable for sheet metal, wood board, plastic, aluminum alloy, copper, NOT recommended for high carbon steel, hard metal..
  • 7 Pack Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8 Pack 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6 Pack 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steel, they are pectect for sinking 90° hole in Wood and PVC board for ountersunk screw. Diameter- 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"),....
Check Stock

Rocaris 39 Pack Woodworking Chamfer Drilling Tools, Including Countersink Drill Bits, L-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool

  • 39 Pack Woodworking Chamfer Drilling Tool Kit Include Including Countersink Drill Bits, L-Wrench, Wood Plug Cutter, Step Drill Bit, Center Punch, Drill Stop Bit Collar Set, Twist Drill Bit Tool. Pecfect gift for fathers, friends, carpenter and DIY lovers..
  • 7Pcs Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasive resistance, large chip flute and five edge chamfers can drain saw dust faster and easier(Size - 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drill depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfection. Can cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 3 Pcs 1/4" Hex Shank HSS Step Drill Bit Set – Great heat/ corrosion/ rust resistance with titanium coating. Specification: 4-12mm / 4-20mm / 4-32mm. Suitable for drilling holes in Iron Plate, Copper Plate, Aluminum Plate, Wood, PVC sheet, Insulation Boards. Not recommend for hard and br....
Check Stock

amoolo 10-Pack Countersink Drill Bit Set with 1 Free Hex Key Wrench, 7 Pcs High Carbon Steel Countersink Drill Bits for Wood, 3 Pcs Hex Shank Wood Countersink Bits (1/2\ 5/8\ 3/4\), Woodworking Carpentry Reamer

  • 【IDEAL COMBO SET】7 countersink drill bits size of Ø7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm), 9/32”(7mm), 5/16”(8mm) combine with Ø19/32”(15mm) countersink pedestal, 13/32”(10mm) combine with Ø45/64” countersink pedestal. 3 countersink bits with most commonly-used sizes of Ø12mm(1/2"), 16mm(5/8"), 19mm(3/4") A 1/10”(2.5mm) Free Hex Key Wrench Plus. Come with a portable plastic case for easy convenient select, storage and organization..
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects..
  • 【EFFICIENT DESIGN】For 7 countersink drill bits, 3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling.
  • 2-spiral flute makes chip removing easy and efficient. For 3 countersink bits, 90°on the point & 1/4" hex shank for quick change make the countersink process convenient. All drill bits get 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness..
  • 【REMOVABLE& ADJUSTABLE】Perfect for Wooden planks, Fiberboard, Particle boar....
Check Stock

MOHOO Countersink Drill Bits, 7pcs Woodworking Countersink Drill Bits Set, Woodworking Chamfer High Carbon Steel Countersink Drill Bits for Woodworking 3 4 5 6 7 8 10mm with Hex Key

  • TRI-POINTED DESIGN: The tri-cuspid countersink make sure drills will not produce offset, not easy to slip, good for accurate and fast drilling. The five-edged chamfer design of the countersink drill helps to remove chips from the holes on both sides automatically and quickly.
  • HIGH CARBON STEEL : MOHOO Countersink drill set is made of high and carbon steel which offers solid countersink, sharp drill bits with high hardness and good abrasion resistance.
  • REMOVEABLE& ADJUSTABLE: The countersink bits are easily adjustable with the included hex key wrench which makes it convenient to adjust the depth of the bit before the countersink hits the material.
  • PACKAGE CONTENTS: One set of countersink drill bits comes with 7 pieces of countersink drill bits in 7 size, #3 #4 #5 #6 #7 #8 #10mm, and 1 piece of L-shape hex wrench included.
  • MULTIPLE USES: This countersink drill bits set is widely used in woodworking projects, softwood & hardwood, fiberboard, particle board, plywood, plastic, PVC and soft metals.
Check Stock

SGS 1/8\ Head Diam 1/8\ Shank Diam 3 Flute 60 Solid Carbide Countersink(Pack of 2)

  • Holemaking,G2,Countersink Accessories,I2,.
Check Stock

amoolo Countersink Drill Bits Set 7Pcs, Counter Sink Drill Bit for Wood, Woodworking High Carbon Steel Carpentry Bit with Chamfering Combination Pedestal, 1 Free Hex Key Wrench Attached

  • 【IDEAL COMBO SET】 A set of 7 countersink drill bits with 7 drill size, φ7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm), 9/32”(7mm), 5/16”(8mm) combine with 19/32”(15mm) countersink pedestal, 13/32"(10mm) combine with φ45/64"(18mm) countersink pedestal. A 1/10"(2.5mm) free hex key wrench. Come with a portable plastic case for easy select, storage and organization..
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects..
  • 【EFFICIENT DESIGN】3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling.
  • 2-spiral flute makes chip removing easy and efficient.
  • 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness..
  • 【MULTIPLE APPLICATION】 Perfect for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, PVC and soft metals. Suitable for hand drill, bench drill and electric drill. The drilling depth of countersink drill bits are adjustable by screws with various lengths.
  • Meanwhile, their bits are removable for easy cleaning, sharp....
Check Stock

Replacement Bits For No 8 Trim Smart-Bit Pre-Drilling And Countersinking Tool Item No BDA141

  • [Specifications and packaging]: Countersink drill bit set includes 5 pcs countersink bits and 1 pc aluminum carrying case.Include size:1/4", 3/8",....
  • [Function]: Counter sink drill bits sink holes into most machinable metals, plywood, softwood, hardwood, fiberglass plastic, mild steel..
  • [Material]: Metal countersink bits are made from industrial grade high-speed steel for increased durability.Each sink has a black oxide coating to....
  • [Advantage]: 82 degree countersink a five-flute design removes chips faster and dills smoother and ensures an extended life..
  • [Special 82-Degree Tip Drills]: Steel countersink bits 82-degree tip drills can drill holes on almost any material, with unique design, high....
Check Stock