ReviewsTapered End Mill Bit For Steel

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Radius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool

  • 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
  • Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
  • Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
  • For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

findmall 5-Piece R8 End Mill Holder Set 1/4 3/8 1/2 5/8 3/4 Adapter for Bridgeport Type Milling Machines

  • Diameters - Contains 1 each R8 holders: 1/4, 3/8, 1/2, 5/8, & 3/4..
  • Well-made Processing - The surface of the face mill cutter arbor is quite smooth, which offers a comfortable feeling and nice appearance..
  • Premium Quality Material - This end mill holder is made of alloy forged tool steel, rugged and durable, which is enough to ensure a long time use..
  • Easy to Use - This end mill holder set is suitable for both double ended and single ended, which is more convenient..
  • Application - This end mill holder is suitable for milling machines with R8 spindles.The set includes 5 sizes of end mill holder to meet your various needs..
Check Stock