ReviewsTapping Arms

Threading & Tapping attachment-lathe tailstock die holder set MT3

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Check Stock

Tapping Block Flooring Tools - Tapping Block for Vinyl Plank Flooring Install Flooring Tapping Block with Big Handle Lengthen Floor Tools 12’’ x 2-3/4’’ Large

  • ⚒【What Tapping Block Does】Joins flooring planks without damaging the floor. Close gaps during flooring installation with the Lengthen Flooring....
  • ⚒【Our Unique Point】LARGE HANDLE DESIGN - Easy to grip handle. Will is not hit your hand when using a hammer. Comfortable Handle Easier to exert....
  • ⚒【Use Attention】Protects the tongues and edges of your flooring. Tapping with a soft head mallet only, never with a metal hammer, this tapping....
  • ⚒【Lengthened Tapping Block】This professional tapping block prevents damage when seating delicate tongue and groove flooring. Unique combination....
  • ⚒【Satisfied or Get Full Refund】We make it our commitment to provide total customer satisfaction with all of our tools. If for any reason you're....
Check Stock

uxcell Thread Milling Threading Tap 7/16\-20 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

  • Tap Size: M20 x 2.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Thread Milling Threading Tap 3/8\-24 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

  • Tap Size: M10 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

Acrux7 14mmx1.5 HSS Right Hand Thread Tap, Metric Thread Tap, Thread Milling Tap M14 X 1.5mm Pitch

  • 【MATERIAL】-Made of made of high speed steel and are good for most general purpose applications,offering a combination of hardness and toughness for wear resistance.
  • Standard thread design,clear and tidy,provide rapid chip removal for efficient threading.
  • 【FEATURE】-Straight flute taps are used for through hole and shallow blind hole tapping.
  • Adjustable forward and reverse,ratchet rotation,compact and convenient.
  • 【NOTE】-Before tapping,confirm whether the diameter of the round hole is appropriate.
  • If the hole is too small for tapping,the tap will wear out more unnecessary,which will increase the risk of tap breakage.
  • 【APPLICATION】-The taps are used formanual equipment or special processing consoles,such as tapping machines,drill-in-one bench drills etc.
  • With this tap,you can finish tapping on stainless steel,iron,aluminum,copper,general steel and other materials.
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock