ReviewsTapping Machine Kit Imperial

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..

Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
Free Shipping.ETA:7-12 days.No Import Duty.1 year....

Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..

Check Stock

GuaShaco Jade Gua Sha Comb For Hair Scalp - Chinese Scalp Acupuncture

Hair and Scalp Care - Hair and scalp care is as important and vital as skincare. Use this jade comb with easy DIY steps to enhance overall scalp....
How to use - Simply press the jade comb on your scalp and run it through the hair in a constant direction to massage. You can use it along with small....
Embedded In TCM, Made With Love - Use our Jade Gua Sha Scalp Comb to relief stress and tension to help in migraine/headache. Deep scalp guasha also....
From Imperial Deluxe Kit - This individual Jade Comb is one of the most popular jade tools from our Imperial Jade Deluxe Kit. Now available to get it....
Guaranteed Authenticity - Every Jade Gua Sha Scalp Comb is made from genuine Xiu Yan Jade. All our jade tools are certified in authenticity..

Check Stock

Kids Maple Tree Tapping Kit - Taps & Tubes Kit - Fun and Educational Maple Sugaring Kit

Our Kids Maple Tapping Taps and Tubes Kit comes complete with a Children's book, Kid's Guide to Maple Tapping, filled with photos and fun activities!.
Kit specially designed children. Some adult supervision required.
Everything your junior sugarmaker needs to become a real Maple syrup maker.
Educational and fun. Protes a healthy back to nature activity for children.
Kids learn while they are having fun. A great family or kids group activity..

Check Stock

X-DREE Replacement Brass Tone 14mmx10mmx5mm Self Tapping Threaded Inserts 2Pcs(Reemplazo de tono de latón 14mmx10mmx5mm Inserciones roscadas autorroscantes 2 piezas

[50Pcs M3 M8 Self Tapping Thread Inserts Set]: There are 50Pcs stainless steel inner threads, including M3, M5, M6, M7, M8, M9, M10 M11 and M12, could meet your different needs in your repair work.
[Self Tapping Thread Inserts]: These thread inserts have the self tapping capability, which is easy to use. You can directly use the installation tool to screw it into a specific hole without pre tapping.
[Organzier Box for Easy Storage & Use]: Our screw repair sleeve assortment Kit is equipped with a plastic storage box, which is small in size and easy to carry. There are small compartments in the box, which allows you to sort and store thread reinforce repair tools in a more organized way. And it also makes it easier and faster for you to identify and access the screws.
[Sturdy Stainless Steel]: Our screw sleeve Assortment kit is made of stainless steel, which has good rust and corrosion resistance. The high quality materials make these thread inserts durable and not easy to deform, break or slip.
[Wide Application]: The stainless steel inner thread set could be us....

Check Stock

INTBUYING Pneumatic Air Tapping & Drilling Threading Machine Air Drill Tapper Flexible Arm (M3-M12 Tap Collets Vertical)

Tapping Ability of Pneumatic Tapping Machine: steel/aluminum: M3-M12, stainless steel: M3-M8, Range of Rotation: 400rpm(stepless speed regulation), Working radius:39.37"（1.0m）,Working pressure:0.6-0.8Mpa.
Pneumatic Tapping Machine: Avoid the limitations of manual tapping, time-saving and labor-saving, no damage to thread, and the tap is not easy to break. Wide range of activities, heavy workpiece do not need to be moved.Smaller gas pressure and gas (5-8Kg / cm2), large torque output..
Premium Quality: M3-M12 Pneumatic Air Tapper adopts high strength aluminum alloy, smooth running, low noise, stable performance, simplified operation. Clamping cylinder with overload protection device can avoid tap damage.
Applicable Materials: M3-M12 Air Tapper can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
Heavier work matter does not need positioning device or mobile, installed plus universal head can easily get.Rapid fast positioning and high cutting speed, increased production capacity..

Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

Northern Brewer - Dragon's Silk Imperial Stout Extract Beer Recipe Kit

Beware the dragon that lurks in the inky shadows of this potent ale. On the surface, Dragon's Silk Bourbon Barrel Imperial Stout exhibits a facade of chocolate, coffee and approachable roast. But as you delve deeper into the lair you will discover a tremendous hoard of sweet bourbon, rich oak and smooth notes of opulent vanilla..
Brewing this recipe kit is much easier than slaying any dragon, thanks to an abundance of premium ingredients and brewmaster know-how. But the complexity of the finished ale is as layered and captivating as any quest. We urge you to face off with a pint of this commanding ale, and savor your victory..
Brewing Notes - Style: Bourbon and oak aged Imperial Stout, Fermentation Range: 60 - 73F, OG: 1.096, SRM: 35, IBUs: 43, ABV: 9.8%.
Tasting Notes - Bourbon sweetness, Smooth oak, Full bodied, Moderate roast, Hints of chocolate and coffee.
Recipe Kit Includes: Malt extract, grains, hops, yeast, priming sugar and step-by-step instructions. Makes 5 Gallons.

Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.

Check Stock