ReviewsTapping Machine M12

Threading & Tapping attachment-lathe tailstock die holder set MT3

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....

Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..

Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

FirstPower 4.0Ah 18V DC9096 DC9098 Replacement Battery - Compatible with Dewalt 18V XPR Cordless Power Tools DC9096 DC9098 DC9099 DW9095 DW9096 DW9098 DE9038 2Packs

【Capacity Upgraded】Capacity: 6000mAh | Battery type: Lithium | Voltage: 12 Volts | Wattage: 72Wh | Package: 2 Pack | Ship from US | Replacement battery compatible with (M12) Milwaukee 12v tool battery.
【100% Replacement for Milwaukee M12 12V Batteries】Replacement for Milwaukee original M12 12-Volt Compact & Extended Capacity Lithium-Ion battery packs 48-11-2460, 48-11-2440, 48-11-2420, 48-11-2412, 48-11-2401, 48-11-2410, 48-11-2411, 48-11-2402 and 48-11-2430.
【100% Compatible with Milwaukee M12 12V Tools】Compatible with all 12 volt Milwaukee tools. Such as M12 hammer drill, M12 impact cordless tools, M12 heated jackets and etc. Also for the M12 12v battery charger.
【M12 12V High Output Batteries】6000 mAh high capacity, quickly charged, long-running time, power your M12 tools, make you work more effective without charging again and again, this M12 battery 6.0Ah comply with FCC RoHS and CE security testing standards.
【What You Get】2 pack M12 12V 6.0Ah Batteries. 90-Days Money Back and 12 Months Warranty! Please REACH OUT to us on your order page if having any issues. We're grateful for the opportunity to learn from your experience, and we'll make it better.

Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....

Check Stock

M12™ FUEL™ SURGE™ 1/4 in. Hex Hydraulic Driver 2 Battery Kit

TIM SANMERSENOD ▲M12 3/8 in. Drill/Driver (2407-20)▲ Delivers up to 275 in lbs of Torque and 0-400/0-1,500 RPM. New ergonomic handle design for increased comfort. Metal Ratcheting Chuck for maximum durability. The onboard LED light and fuel gauge help you increase productivity and avoid interruptions..
▲M12 1/4 in. Hex Impact Driver (2462-20)▲ Milwaukee Impact Mechanism delivers 1,000 in-lbs of torque. 0-2,500 RPM for increased fastening speed. New ergonomic handle design for increased comfort. On-board battery fuel gauge displays remaining run time..
▲M12 Hackzall Recip Saw (2420-20)▲ Only 11" and 2.2 lbs. for cutting in tight spaces. Variable Speed Trigger for increased user control. Accepts both HACKZALL and SAWZALL style blades. Keyless QUIK-LOK Blade Clamp allows for quick and easy blade changes. Battery Fuel Gauge displays remaining run-time. Built-In LED Light illuminates work surface..
▲M12 3/8 in. Ratchet (2457-20)▲ Powerful 12-volt motor: Delivers up to 35 ft-lbs of torque. Superior fastening speed: Produces 250 RPM, with variable-speed trigger for greater control. Built-in LED light: Illumina....

Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

...read that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools..
Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much more robust and used for a broader range of material. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..

Check Stock

Khanka Hard Storage Case Replacement for Milwaukee 2485-20 M12 FUEL Right Angle Die Grinder, Case Only

Sleek design, a case designed for milwaukee 2485-20 right angle die grinder, fits perfectly. The hard shell of this milwaukee m12 grinder is black. You can put the m12 grinder in a hard case specially designed for the milwaukee right angle die grinder for easy portability when you go out..
This milwaukee m12 angle die grinder hard case, the interior is made of high quality velvet, the soft inner structure ensures the protection of the milwaukee tools angle grinder. The milwaukee m12 die grinder has a hard case with a mesh design on one side to store your m12 die grinder accessories and soft storage on the other side for your milwaukee die grinder..
This milwaukee die grinder m12 hard shell case is made of high quality EVA material, which is shockproof, dustproof and waterproof, it can protect your milwaukee small angle grinder from shocks and splashes when you go out to carry. Put the milwaukee angle grinder tool in the box after using the milwaukee 2485-20 right angle die grinder at home to prevent the milwaukee m12 grinder from accumulating dust.
This hard case designed for m12 2485-20 grinder keeps your milwaukee right angle die grinder safe, convenient and lightweight. The classic zipper design makes it easy to open and close. This milwaukee m12 ang....

Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..

Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
Free Shipping.ETA:7-12 days.No Import Duty.1 year....

Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..

Check Stock