ReviewsTapping Machine Wrench

100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)

Product includs:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, a....

Check Stock

CQYD Snow Blower Impeller KIT -1/4" 3-Blade Universal- Modifies 2-Stage Machine

Three Blade Snow Blower Impellers Qty (3) rubber paddles Qty (3) metal straps Qty (9) bolts & lock nuts Qty (3) self-tapping screws.
(3) 1/4" thick rubber paddle (2"W x 5"L),(3) metal strap with holes - 1 3/8" W x 3 3/4"L,(9) bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket),(3) self-tapping screw (#14 x 1).
Made of superior quality raw material, stable characteristics and high reliability..
Included item are detailed in the product pictures.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..

Check Stock

CQYD Snow Blower Impeller KIT - 3/8" HD 3-Blade Universal- Modifies 2-Stage Machine

Qty (3) rubber paddles, Qty (3) metal straps,Qty (9) bolts & lock nuts,Qty (3) self-tapping screws..
(3) 3/8" thick rubber paddle (2"W x 5"L),(3) metal strap with holes - 1 3/8" W x 3 3/4"L,(9) bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket),(3) self-tapping screw (#14 x 1).
Made of superior quality raw material, stable characteristics and high reliability..
Included item are detailed in the product pictures.
Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..

Check Stock

Champion Cutting Tool Brute Platinum XL22-1/4-20 Heavy Duty Spiral Point Tap: (Individual Pack)- MADE IN USA

Heavy duty spiral point taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
Ideal for through holes applications since spiral point quickly Shears and ejects chips ahead of the tap.
Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life.
Recommended for use with Brute xlt Tapper and Brute Lube Fluid. Can also be used in handheld tap wrench.

Check Stock

DEWALT 20V MAX* Impact Wrench Detent Pin Anvil Kit, Mid-Range, Tool Connect, 1/2-Inch (DCF896P2)

...ws user to set runoff speed in reverse helping to prevent fastener runoff. In forward, users can set pause before impact and auto shut off times to aide in fastening consistency..
Precision Tap automatically alternates the tool between forward and reverse allowing for easier and faster cutting of threads (vs. manual tapping)..
DEWALT built brushless motor for increased efficiency and runtime vs. brushed models..
Variable speed trigger helps provide speed control to the user..
Through the Tool Connect app receive diagnostics on your impact wrench such as internal coin cell battery life, tool temperature, number of trigger pulls and how long the tool has been running..
Track your tool utilizing the last seen feature which provides the street address of where your tool was last in range of a Tool Connect enabled device. Help prevent theft by setting the tool to disable when out of range and receiving out of range alerts..
Easily and quickly assign tools to jobsites and users on fthe Tool Connect Inventory Manager Software, increasing accountabilty and reducing lost tools..

Check Stock

DEWALT 20V MAX Tool Connect 1/2' Mid-Range Impact Wrench with Hog Ring Anvil, Tool Only (DCF896HB)

330 ft-lbs of max fastening torque and 600 ft-lbs of max breakaway torque to complete a wide variety of applications..
Compact design of only 6.95" and 3.48 lbs allows access to tight spaces and reduces user fatigue..
3 fully customizable modes allow you to personalize your impact wrench through the Tool Connect™ app including setting: Speed, LED brightness and delay, Precision Wrench™ Control and Precision Tap™ Controls..
Precision Wrench™ allows user to set runoff speed in reverse helping to prevent fastener runoff. In forward, users can set pause before impact and auto shut off times to aide in fastening consistency..
Precision Tap™ automatically alternates the tool between forward and reverse allowing for easier and faster cutting of threads (vs. manual tapping)..

Check Stock

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
Tips: Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..

Check Stock

86PC Tap and Die Set Combination Metric Tap and and Die Set Tungsten Steel Titanium SAE and Metric Tool

Premium Quality: High-duty heat-treated Tungsten steel construction, high-hardness, wear-resistant, and its service life is 5-10 times longer than that of non-tungsten taps, durable and reliable for your long-lasting use..
Excellent Performance: Fully ground & high-precision tap is super-sharp for your tapping and chip removing operation, running smooth and efficient, offering you excellent performance..
Reinforced Stability: Each dies is designed with a lock hole, it can be locked tightly after the screw is aligned and locked, ensures double stability during your operation..
Adjustable Tap Wrench: Tap wrench is adjustable: you can set the adjustable basin wrench to either its position for turning clockwise (tightening) or turning anti-clockwise (loosening). You can do this by flipping the jaws 180 degrees over its pivot..
Sae And Metric Included: This tap and die set comes with 86 pieces in total: 39 pcs taps,39 pcs dies, 2 tap holders (M6 to M20 - 1/4" to 3/4"& M3 to M12 - 1/16" to 1/2"), 2 die holders (M25 - 1") & (M38 - 1-1/2")and 1 T-bar tap wrench, most popular sizes included..

Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..

Check Stock

Thaekuns TB123A Washer Spanner Wrench for GE Whirlpool Washing machine

⭐Washing Machine Spanner Wrench AP4503397, TB123A, TB123 replaces TJ90TB123A, AP4503397, 1021707, 12393, 123931, 2020913, 22038313, 38313, 41-123, 70110, ERTB123A, OVR23A, TB123.
⭐ Includes 1 x TB123A Washing Machine Spanner Wrench. This TB123A Spanner Wrench is approximately 14" Long x 2 1/2" Wide x 3/8" High. Please double check the size of the product you need before placing an order, so it won't work due to incorrect size.➤Perfect Torque Tool - The wrench is specifically designed to remove and install the washer tub retaining nut.If your washing machine needs to be installed or repaired, you can use TB123A Washer Spanner Wrench..
⭐The TB123A multifunctional washing machine wrench is a wrench used to remove and install the fixing nut of the washing machine tub. Provide tools for tightening and installing the nuts on the washing machine..
⭐TB123A Universal Spanner Nut Wrench make it easier and simpler for you to repair your machine. Made of higher quality and safer materials, not easy to break, not easy to rust, and easier to use. It is a good helper for your installation..

Check Stock