ReviewsTapping Oil For Stainless Steel

uxcell Straight Flute Taps M12 x 1.5 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool

Straight Flute Taps: Thread size: M12 x 1.5.
cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..

Check Stock

uxcell Metric Machine Thread Milling Tap M16 x 1.5 H2 Titanium Coated Ti-coated High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool

Thread Size: M16 x 1.5. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications..
The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps..
Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes.
Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.

Check Stock

uxcell Metric Machine Tap Left M5 Thread 0.8 Pitch H2 Accuracy 3 Flutes High Speed Steel

plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.

Check Stock

uxcell Thread Milling Threading Tap 7/16\-20 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 4 Straight Flutes 2B Tolerance Grade

Tap Size: M20 x 2.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

uxcell Thread Milling Threading Tap 3/8\-24 UNF, Left Hand Machine HSS (High Speed Steel) 6542 Uncoated 3 Straight Flutes 2B Tolerance Grade

Tap Size: M10 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

★ Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..

Check Stock

4mm x 0.7 M35 HSS-CO Metric Right Hand Tap M4 x 0.7mm Pitch For Stainless Steel

plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.

Check Stock

uxcell Metric Machine Tap M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool

Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

ABN Large Tap and Die Set Metric Tap and Die Kit Rethreading Tool Kit Thread Maker Hole Threader 110-Piece Set, Metric

plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide downward chip removal.
Material & Finish: High-speed steel tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
Applications: Great for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc..
How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps.
Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping.

Check Stock

uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Milling Tap 5pcs

Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..

Check Stock

US Stock ZAC Electric Tapping Machine with Auto Oiling and Blowing Function 110V Flexible Tapping Arm Machine Touch Screen M3-M16 Tapper ANSI Full Set Tap Holder Included

Model: M16R with Auto Oiling and Blowing, Universal Type, Supply Voltage: 110V, Rated Power: 600W, Rotated Speed: 0-375r/min Working Radius: 1045mm.
Main Feature: Oil spraying and air blowing volume adjustable.
When tapping, ZAC electric tapping machine can automatic oil filling, automatic air blowing, instead of manual oil brushing, greatly improving work efficiency.
Standard accessories: Tapping arm+servo motor and reducer+tap holder M3-M16(ANSI full set)+Universal Joint+Auto Oiling and Blowing Function. If you need DIN/JIS/ISO standard, pls contact with us.
Good at vertical and horizontal work of complex and heavy workpiece, locate quickly, and process accurately. Applicable materials: aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
One Year Warranty. ETA: 7-9 Days to your Door via Express.

Check Stock