ReviewsTaurus Slim Sights

Concealment Express OWB Paddle KYDEX Holster fits Taurus PT709 / PT740 Slim | Right | Black

  • OUTSIDE THE WAISTBAND KYDEX PADDLE HOLSTER fits: Taurus PT709 / PT740 Slim (ONLY unless Specified). Our minimalist OWB paddle holsters are designed to....
  • EXCLUSIVE HOLSTER FEATURES: Undercut Trigger Guard keeps the KYDEX from interfering with your draw. Over-Cut Open-Face accommodates Threaded Barrels....
  • ADJUSTABLE ‘POSI-CLICK’ RETENTION & CANT: When you holster your Taurus PT709 / PT740 Slim, you'll hear a satisfying ‘CLICK’ letting you know....
  • 100% MADE IN USA - GUARANTEED FOR LIFE: Our holsters are designed and built from start to finish in the USA by Americans on All US made Machinery &....
Check Stock

BLACKHAWK SERPA Concealment Holster - Matte Finish, Size 25, Right Hand, (Smith & Wesson M&P 9/40 & Sigma)

  • Fits Most Revolvers with 7 1/2" - 8 3/8" Standard Barrel without Porting Extension. WILL NOT FIT REVOLVERS WITH SCOPES OR TALL FRONT OR REAR SIGHTS.
  • WILL NOT Fit the Taurus Raging series guns or Guns with Shrouded Barrel. Extended Barrel Lug or X Frame Guns (S&W 460 & 500).
  • Right Hand Use - Vertical Carry - Six way size adjustment.
  • Double Speedloader Pouch - Dual Stay Flat Shoulder Pads.
  • Belt Tie-Down Straps - Snap Closed Thumbreak Strap.
Check Stock

Taurus G2C&G3C Holster w/Olight PL Mini 2 Valkyrie -Optic Cut- Inside Waistband Concealed Carry Holster for G2C G3C PT111 G2 PT140 Fit 1.5 1.75 Wide Belt Adj Retention

  • 【Taurus G2C, G3C, PT111 G2, PT140 with Olight PL Mini 2 Valkyrie】Custom Made for Taurus G2C, G3C, PT111 G2, PT140 with Olight PL Mini 2 Valkyrie..
  • 【Optic Cut】Fit pistol with Red Dot/ Optical sights..
  • 【Hand Polished Edge for Comfort Carry】All the edges are polished and smooth to make you feel comfortable when it’s again the skin..
  • 【Fit both 1.5’’ & 1.75’’ wide belt】The holster is preassembled with 1.5’’ wide belt and there is an extra pair of clip for 1.75’’....
  • 【FINE CRAFTSMANSHIP】Lives can be saved, and that is what drives our craftsmen to make sure every holster is reliable in quality, durability,....
Check Stock

Taurus G2C G3C w/Olight Baldr Mini -Optic Cut- Inside Waistband Concealed Carry Holster for G2C, G3C, PT111 G2, PT140, Fit 1.5'' 1.75'' Wide Belt, Adj. Retention, RH

  • 【Taurus G2C, G3C, PT111 G2, PT140 with Olight Baldr Mini】Custom Made for Taurus G2C, G3C, PT111 G2, PT140 with Olight Baldr Mini..
  • 【Optic Cut】Fit pistol with Red Dot/ Optical sights..
  • 【Hand Polished Edge for Comfort Carry】All the edges are polished and smooth to make you feel comfortable when it’s again the skin..
  • 【Fit both 1.5’’ & 1.75’’ wide belt】The holster is preassembled with 1.5’’ wide belt and there is an extra pair of clip for 1.75’’ wide belt..
  • 【FINE CRAFTSMANSHIP】Lives can be saved, and that is what drives our craftsmen to make sure every holster is reliable in quality, durability, comfort and fit for actual combat and daily carry..
Check Stock

XS SIGHTS R3D Tritium Night Sight for S&W M&P, Sig, Canik, Taurus, and HK Pistols, Front and Rear Glow in The Dark Tritium for Tactical Applications (Green, Taurus G2)

  • Fits Taurus G2C, G2 PT III, G2C Millennium G2, G2S, & G3.
  • R3D 3-Dot Tritium Set With Front Sight Available In An Orange Or Green Photoluminescent Glow Dot. Self-Illuminated Tritium Glows 24/7 Providing A Bright, Battery Free, Low Light Visible Sight Picture..
  • Photoluminescent Glow Dot Provides High Contrast Visibility In Bright Light, Absorbs Ambient Light, And Glows With The Self-Illuminated Tritium.
  • Blacked-Out Rear Sight Drives Focus To The Front Sight. Rear Sight Ledge Allows For One-Handed Slide Manipulations..
  • Steel Sights, Made In The USA, No Questions Asked Warranty.  XS Sights Are Machined In Fort Worth, TX From American Made Steel.  We Stand Behind Our Products With A 10-Year, No Questions Asked Warranty..
Check Stock

DPP Titanium Sight Mount for Taurus G3c/GX4 Vortex Venom & Viper Burris Fastfire Ade

  • Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodized finish..
  • For Taurus G3c/GX4 vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights.
  • Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold..
  • 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount..
  • 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.
Check Stock

Meprolight Glock Tru-Dot Night Sight for G-26 & G-27 adjustable set

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear....
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more....
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very....
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Taurus 709/740 Slim with Laser IWB Leather in The Waistband Concealed Carry Holster CCW Black RH

  • Fiber Optic front sight for your Taurus G2C, G2S, G3 w/Original factory Metal sights , PT111 G2, PT140 G2, PT709, PT740, TX22.
  • The front sight comes with 3 fiber optic rods in green, red and orange so you can use any combination of color that you prefe.
  • They are machined from tough 7075 Aluminum Alloy and hard anodized and provide outstanding contrast in daylight..
  • The sight set comes with a new screw for the front sight.
  • The front sight is held in with a screw and thread locker and no sight pusher is used in the installation. The tools needed include a flat blade....
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • ...ate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not ....
Check Stock

Kosibate PU Leather Pancake Holster with Neoprene IWB Gun Holsters, Compatible with Glock 26 27 30 33, M&P Shield, XDs, Taurus PT111 Holster

  • 【MATERIALS】Pancake holster made of ultra-light PU leather and IWB gun holster made of Neoprene material. soft and breathable..
  • 【STURDY CLIP】:The clip has enough strength to stay in place even when drawing with one hand..
  • 【PANCAKE HOLSTER】Fits most full size, compact and sub compact in Glock 19 23 32 26 27 33 30 | M&P Shield, XDs, Taurus PT111, Slim 709, Beretta Nano, SCCY SKY 9mm, Ruger SR9, S&W M&P 9 Compact, Sig P320, Sig P250, Sig 224, Sub Compact, Beretta Px4 Sub Compact, Sprinfield XD9 Sub Compact, FNS 9mm Compact FNS 9C, XDM with 2-3" Barrel, H&K P2000 SK Sub Compact, H&K USP C-40, P30, Hi-Point Sub Compact..
  • 【IWB GUN HOLSTER】 Fits for GLOCK 26, 27, 29, 30, 39, 28, 33, 36, and 43 |S&W 9MM | M&P Shield in 9mm, .40, and .45 ACP | Ruger LC9 ,380 | Taurus Slim Line, PT111 | Springfield XD Series | Beretta | Bersa | Kahr Arms | Colt | Walther | and many more Compact Pistols..
  • 【KOSIBATE GUARANTEE】Kosibate offers life time warranty on our IWB gun holster, guarantee with 100% satisfaction service..
Check Stock

Kingslayer

  • ...or Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 ....
Check Stock