ReviewsTbeam Esp32

UpBright 36V AC/DC Adapter Compatible with Kodak HP-A0601R3 ESP 2150 3250 5300 5500 3/5/7/9 Hero 5.1 6.1 7.1 9.1 1k7602 Printer APD DA-74A36 DA-60A36 Delta EDPA-108BB A LITEON PA-1800-01HK-ROHS 1K2998

  • World Wide Input Voltage 100-240VAC 50/60Hz.OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP:....
  • UpBright New Global 36V AC / DC Adapter Compatible with DC36V Kodak ESP Office 2170 2150 3250 5250 6150 5000 5100 5200 5300 5500 3/5/7/9 Series Hero....
  • Compatible with: Kodak Easyshare ESP Office ESP 3/5/7/9 series ESP-3 ESP-5 ESP-7 ESP-9 ESP3 ESP5 ESP7 ESP9 ESP 3.2 32 ESP3.2 ESP32 2100 2150 5210 5260....
  • Compatible with: APD DA-60A36 DA-18A36 DA-74A36 DA60A36 DA18A36 DA74A36 Asian Power Devices AcBel AD9024 P/N: EADP-108AB A EADP-108ABA PN....
  • Fits: Kodak HP-A0601R3 HPA0601R3 P/N: VP-09500084-000 1K5669 1K5667 1K2866 1K5862.
  • Kodak Hero 3.1, 5.1, 6.1, 7.1, 9.1 91 All-in-One Multifunction....
Check Stock

AITRIP 3PCS Type-C USB ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters for Arduino

  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
  • 2.4GHz Dual Mode WiFi + Bluetooth Development Board.
  • Durable material: This product is made of high-quality material, durable, long service time, firm and stable in use..
  • Package: You will get 3 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

ACEIRMC ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE (3pcs)

  • 1.ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE.
  • 2.Ultra-Low power consumption, works perfectly with the for Arduino IDE.
  • 3.SupportThree Modes: AP, STA, and AP+STA.
  • 5.ESP32 is a safe, reliable, and scalable to a variety of applications.
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

AITRIP 5PCS ESP32 GPIO Breakout Board 30Pins ESP32 Development Board Type-C USB and Micro USB CH340C WiFi+Bluetooth Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board

  • Note: AITRIP Expansion Board ONLY can fit 30pins ESP32. ref asin: B08D5ZD528.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • Integrated 520-kBSRAM, 448-kBROM16-kBSRAMinRTC.
  • USB driver chip: CH340C, with good system compatibility, higher download speed, and more stability..
  • you will get 5PCS ESP32-DevKitC-32 ESP-WROOM-32 Expansion Board.
Check Stock

Adafruit (PID 3591) HUZZAH32 – ESP32 Feather Board (pre-soldered)

  • Module is nestled in at the end of this Feather contains a dual-core ESP32 chip.
  • ESP32 has way more GPIO than the ESP8266.
  • Recommended for makers who have some experience with microcontroller programming..
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340C with OV2640 2MP Camera Module Dual Mode for Arduino

  • The ESP32-CAM-MB module is a small camera module with a size of 39.8MM*27MM.
  • ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
  • ESP32-CAM-MB module can work independently as the smallest system.
  • WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz.
  • Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

AITRIP 5pcs ESP32-CAM-MB WiFi Bluetooth Development Board OV2640 Camera Module Micro USB Interface CH340G USB to Serial Port auto Download for Arduino

  • HK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions..
  • it is new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz.
  • Application: Home smart device image transmission.
  • Wireless positioning system signal and so on..
  • Low power consumption: deep sleep current is as low as 6mA.
  • It is a small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
  • 5PCS ESP32-CAM WiFi Bluetooth Board ESP32-CAM-MB Micro USB to Serial Port CH340G with OV2640 2MP Camera Module.
Check Stock

Stemedu ESP32-CAM ESP32 Camera Module WiFi + Bluetooth Dual Cores Development Board for Arduino with 2.4GHz Antenna, Built-in 520 KB SRAM, External 4M PSRAM

  • Authentic ESP32-CAM from Ai-Thinker. Tutorial link is Document link https://randomnerdtutorials(DOT)com/?s=ESP32-CAM.
  • ESP32 only needs a few peripheral devices to achieve powerful processing performance, reliable security performance, and WiFi Bluetooth function. It is an ideal solution for IoT applications.
  • Support OV2640 and OV7670 cameras, built-in flash. Support TF card, max capacity is 4G.
  • Applications : ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications..
  • How to email us? Please click ¡°Stemedu¡±(you can find "Sold by Stemedu" under Buy Now button), in the new page, click ¡°Ask a question¡± to email us.
Check Stock

3D Printer Control Board Back EMF Protection Powerful 520Kb RAM USB Update Firmware ESP32 3D Printer Motherboard with WiFi for Serial Screen

  • SUPPORT VARIOUS SCREEN: This is a 3D printer main control board with onboard ESP32 wifi, supports for Marlin2.0 firmware, in addition to ordinary....
  • 32 BIT MICROPROCESSOR: Built in ESP32 DOWD V3 chip, for Xtensa dual core 32 bit LX6 microprocessor, supporting clock frequency up to 240MHz.
  • POWERFUL AND VERSATILE: The main board adopt ESP32 WROOM 32U module, embedded dual core 32 bit high speed MCU, the clock is up to 240MHz. And....
  • 8M BYTE CHIP: In addition, the module has a built in 8M byte Flash memory chip, which provides effective protection for more application scenarios.
  • BACK EMF PROTECTION: VEXP has designed a protection circuit for the back EMF generated by the stepper motor, which greatly reduces the damage to the....
Check Stock