ReviewsTechnician Tool Storage

Gates 91030 Micro-V Stretch Fit Installation Tool Black

  • Designed to assist in the installation of Stretch Fit belts on certain applications.
  • Required for proper installation to avoid damaging the belt.
  • Available separately so the technician isn’t forced to buy a tool every time a belt is installed, unlike the OE belt.
  • Installation instructions available online.
Check Stock

Innova 3149 Extension Cable for Ford Code Reader Item 3145

  • Allows for one-person operation of the INNOVA 3145 Ford Code Reader.
  • Includes 6-foot heavy duty cable with connectors for MCU and EEC-IV systems.
  • Allows technician to view their scan tool while inside the car.
  • Helps to do all code reading without the help of another person.
Check Stock

Lisle 37370 Glow Plug Harness Puller Ford , RED

  • Helps prevent damage to the harness and connector rail.
  • It features a thumb tab and a textured highly visible grip that provides a better grip on the tool when removing the harness.
  • The harness is fragile and can break, but with a better grip the technician will have more control when removing the harness.
Check Stock

Uni-Syn Carburetor Synchronizer/Carb Synchronizing/Balancing Tool Weber Su Type

  • A multifunctional tool that allows the technician to perform many tasks on the carburetor during cleaning.
  • Installs Seats, Removes Emulsion Tube, Removes Seats, Removes O-Rings, Pilot Seats, Set Float Height.
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

ToughBuilt - 24" Builder Bag - (TB-77-24)

  • HEAVY DUTY TOOL BAG - Protects your tools with 900D fabric construction..
  • GREAT ORGANIZER - With its 28 pockets, 16 outside and 10 inner pockets. This organizer is a rugged pack for any contractor, plumber, carpenter, lineman, technician, and tradesman and women, capable of handling the toughest construction site..
  • UNIQUE DESIGN FOR ADDED TOUGHNESS - Our unique design stands out at work sites and will keep your tools and equipment safe for years to come. Comes with a lockable main compartment to protect your tools for security and safety. The tool bags come in 12 inch, 15 inch, 18 inch, and 24 inch sizes for all your toolbox needs..
  • BUILT TO LAST - Made from high quality, rugged materials that are built to last for years. This tool bag stands up to the toughest environments and its covered with our limited lifetime warranty to the original purchaser against defects in material or workmanship..
  • USA QUALITY CONTROL - ToughBuilt products are designed, engineered, tested, and inspected in the USA to ensure high quality. You can be sure that you're getting the toughest tools on the....
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment, Sheppard M110 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10389

  • Tiger Tool's 10389 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M110 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment, Sheppard M100 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10385

  • The Tiger Tool 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Tiger Tool Rockwell Automatic Slack Adjuster Puller for Commercial Heavy Duty Transportation Trucks and Equipment, Rockwell Automatic Slack Adjuster Tool for Class 6-8 Trucks, 10407

  • Tiger Tool's 10407 Rockwell Slack Adjuster Puller tool will both safely as well as efficiently remove virtually all Rockwell self-adjusting slack adjusters..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.) Please note that Tiger Tool offers a Low Profile Forcing Screw, part number 10401, that is sold separately to use where space in extremely limited..
  • This Heavy Duty Rockwell Automatic Slack Adjuster tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability..
  • Tiger Tool has made the Slack Adjuster Puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Rockwell Automatic Slack Adjuster Puller for Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Lisle 42810 Plastic Clip Removal Pliers

  • Needle nose pliers design fits into recessed pin locations found on some GM vehicles..
  • Designed to prevent damage to the pin or anchor..
  • Also works on traditional clips. Integrated spring makes tool easier to use..
  • Built-in cutter allows technician to cut off fastener head in stubborn applications..
  • Pliers can also be used to remove automotive fuses from panel. The narrow tip design works great on ATO, Micro, Mini Blade, Maxi, and Pal type fuses.
Check Stock

21pcs Precision Screwdriver Set Magnetic,GangZhiBao Repair Tools Kit for Fix Phone/iphone,Computer/PC,Tablet/Pad,Watch,PS4 - Replace Screen Battery Camera Small Electronics Open Pry Tool Kits Sets DIY

  • ... kit set for different digital products, such as Mobile Phones (iPhone6/6s/7/7plus, Samsung, LG, HUAWEI, Google, HTC), Computer, PC, laptop, desktop (HP, ASUS, Lenovo, Apple Macbook), Table, iPad, SLR cameras, Game Console (PS4, Xbox, Nintendo), game handle/joystick and other electronic devices. A Great GIFT for IT technician, technical engineer, hacker, electronics enthusiast, fixer, hobbyist, DIYer, student, housewife, ect..
  • 【 SUPPLY for you 】: GangZhiBao 21-pcs repair tools kits Set for Most Electronics Devices at home&.
  • 【High-quality Handy MATERIAL 】: Magnetic durable stainless steel tip which is is stable and not easy to stripping and deforming.
  • Anti-static ESD tweezers with strong corrosion resistance are used, the tip is not easy to strip and deform. You will found that it’s so high performance after compared with ifixit tool kit..
  • work with Lifetime WARRANTY and great 7/24 customer service..
  • you needn’t to ask help from friends or wait for repairing technician or look for a repair center. This electronics repair tools kits can not only save your money and time but protects your personal privacy!.
Check Stock