ReviewsTeco Phase Induction Motor

Automatic Electric Wire Stripping Machine, Scrap Cable Stripper for Scrap Copper Recycling, Compact & Portable Aluminum Alloy Construction, Extra Blade Included, 1.5mm-25mm

  • ALUMINUM ALLOY CONSTRUCTION: Constructed from solid aluminum alloy, this wire stripper can withstand rigorous environments and easily endure years of heavy use..
  • EASY OPERATION & WIDE COMPATIBILITY: The electric motor powers drill-driven technology while the adjustable blades and rollers fit all wire sizes with diameters from 0.06” (1.5mm) up to 0.98” (25mm)..
  • THE CROWN OF COPPER CABLE RECYCLERS: This wire stripping machine removes the plastic and rubber insulation from undamaged scrap wire - a must-have for recycling your copper cable..
  • 1/4 HP SINGLE PHASE INDUCTION MOTOR: Motorized to save you time, effort, and money, it creates a fast stripping speed of 50 feet per minute, plus the hands-free design increases safety and convenience..
  • PERFECTLY PORTABLE: Measured at 9.4” x 12.6” x 12.6” and weighing only 33 lb, this cable stripper is portable and convenient to move around your workstation..
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Evaporative Cooler Motor, 115V, Cradle

  • Price For: Each Hz: 60 Motor Service Factor: 1.00 Motor Bearings: Ball Standards: UL, CSA Motor Enclosure Design: Open Dripproof Ring Dia.: 2-1/2" Resilient Ring Dia.: 2-1/2" Ins. Class: B Phase: 1 Max. Ambient Temp.: 40 Degrees C Length Less Shaft: 7-15/16" Motor Sub Application: Evaporator Cooler Motor Application: HVAC/R Ring to Ring Center: 7-7/16".
  • Ambient Temperature: 40C Item: Evaporative Cooler Motor Motor Thermal Protection: Auto Motor Design: Split-Phase Motor Mounting Type: Cradle Base No. of Speeds: 2 Shaft Dia.: 5/8" Frame: 56 Voltage: 115 Shaft Length: 1-7/8" Overall Length: 9-13/16" Nameplate RPM: 1725/1140 HP: 3/4, 1/3 Voltage Compatibility: 115, 120, 115/208-230, 115/230, 120/240 Full Load Amps: 9.8/6.4.
  • Motor Shaft Rotation: CW/CCW Country of Origin (subject to change): China.
Check Stock

DGZZI 2Set 28BYJ-48 DC 5V Geared Stepper Motor + ULN2003 Driver Test Module Board for Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • 5 line 4 phase can be used for ordinary..
  • ULN2003 chip driver, connect to the 2 phase, support the development board, With convenient use, direct docking..
  • Package includes: 2* 28BYJ-48 Stepper Motor + 2* Uln2003 Driver Board.
Check Stock

NSKI Dental Lab High Speed 2800RPM Cutting Polishing Lathe Motor Machine Drilling JT-24B CE

  • The dental cutting lathe can be used in all kinds of cutting and polishing for various pint-sized metal, resin,or plastic work pieces and craftwork.
  • It is designed with integrated drilling bit and motor at the same time,and extending the useful time of the drilling pieces.
  • High rotation speed, fast cutting and griding and low noise.
  • Note: This unit is applied to single phase AC. So there will be some magnetic induction,this is normal. So power supply coming with ground line is requested, if no ground line, pls help to connect the wire underneath with the ground, then power on it..
  • Please choose Purple-violet. We are committed to the spirit of "Pursuit of high quality,customers' satisfaction"..
Check Stock

Hoverboard Morning

  • Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
  • "Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
  • Standard heat sink,onboard speed regulating potentiometer，you can use it when you have power on..
  • DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
  • "Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

Grizzly Industrial G0513X2BF - 17 2 HP Extreme-Series Bandsaw with Cast-Iron Trunnion & Foot Brake Micro-Switch

  • Motor: 2 HP, 220V, single-phase, TEFC capacitor start induction, 60 Hz, prewired to 220V.
  • Table size: 23-5/8" x 17-1/4" x 1-1/2" thick.
  • Cutting capacity/throat: 16-1/4" left of blade.
  • Wheels: fully balanced cast iron with polyurethane tires.
  • Blade guides: ball bearing with full enclosure protection.
Check Stock

Poly Nail Gel Kit with 6W LED Nail Light MYSWEETY 8PCS Nail Extention Gel Nail Enhancement Builder Nail Gel Professional Nail Gel Kit with Top & Base Coat + Slip Solution + Painting Gel + Painting Brushes

  • This is single phase VFD with 1 phase INPUT and 3 phase OUTPUT,the power is 2.2KW, 220V,10A, VFD Dimension: 130 x 103 x 200 mm (L x W x H).....
  • Application: Spindle Motor, Drill Press, CNC, HVAC, Lathe, Milling, Pumps, Conveyors, Mach3, Fan, Cooling, Compressor, Three-phase motor and other....
  • Due to the VFD product is a flexibly configurable device , you are welcomed to consult with our CS make best choice for your exact application..
  • Simple to operate and wire, convenient for you to use. Warranty: 1 Year replace or refund!.
Check Stock

Grizzly Industrial G0449-37\ 10 HP Drum Sander

  • Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM.
Check Stock