ReviewsTee Connector

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

  • Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
  • Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
  • High Quality Material: The connector made of high quality plastic and stainless steel.
  • corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
  • Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
  • Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..
Check Stock

Feelers 1/2" Garden Soaker Hose 15 Ft with Soaker Hose Fittings, Round Rubber Garden Drip Hose 70% Saving Hose for Garden Beds,Lawn and Plants

  • ...aterial, which optimizes the pressure resistance of the hose and makes it difficult for the hose to burst. Its operating pressures range from 30psi to 60psi, with an inside diameter of 1/2"(12mm) and an outside diameter of 5/8"(16mm). Water can slowly seep out of the hose to provide the plants with proper moisture..
  • Connector: The soaker hose comes with a 3/4" NPT threaded connector. The gasket inside the connector adds many small holes to reduce the water pressure and prevent the connector from leaking water. In addition, the clamp we are equipped with can be used to replace the brass ring and prolong the service life of the hose..
  • Water saving: The hose is arranged along the direction of the plant, and the water slowly exudes from the pipe wall, extending the time that the water stays at the root of the plant. This reduces over irrigation and saves up to 70% of water..
  • Versatile usage: The soaker hose connector can be connected to other hoses, and it can be above ground or buried underground. Suitable for lawn, garden, flower bed and other places, especially for fine irrigation of rows of plants..
  • Package included: 1/2" x 15ft(4.5m) soaker hose, clamps x2, 3/4" male x1, 3/4" female x1,coupling x2, elbow x2, Tee x2, gasket x2, plug x2..
Check Stock

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio (Dongle Only)

  • Includes 1x RTL-SDR Blog brand R820T2 RTL2832U 1PPM TCXO HF Bias Tee SMA Dongle (V3) (Dongle Only).
  • Several improvements over other brands including use of the R820T2 tuner, improved component tolerances, a 1 PPM temperature compensated oscillator (TCXO), SMA F connector, aluminium shielded case with thermal pad for passive cooling, activatable bias tee circuit and a much improved antenna set..
  • Can tune from 500 kHz to 1.7 GHz and has up to 3.2 MHz of instantaneous bandwidth (2.4 MHz stable). (HF reception below 24 MHz in direct sampling mode with reduced performance). Please note RTL-SDR dongles are RX only..
Check Stock

Vent Systems 4 Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting

  • The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent....
  • Made out of high quallity Metal it is a material with high strength, good toughness..
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally,....
Check Stock

Vent Systems 4 Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting

  • The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent....
  • Made out of high quallity Metal it is a material with high strength, good toughness..
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally,....
Check Stock

Vent Systems 4 Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting

  • The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent....
  • Made of high quality Galvanised steel, it is a material with high strength, good toughness and easy processing..
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally,....
Check Stock

Vent Systems 4 Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan - Duct Hose Dryer Vent T Connector - 4 Inch 3 Way Fitting Metal

  • The duct connector is a three-hole - 3 way connector with two branches. With the dryer vent hose it can be connected to exhaust fans, dryer vent....
  • It can be used outdoors and indoors, even if it is exposed to the sun and rain..
  • The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air....
  • The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Don't worry about leaking air after installation. It is small in....
  • It is suitable for hoses of 100 mm (4 Inch). Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. Finally,....
Check Stock

FireFlex Flexible Chimney Liner Tee Kit - 6 Inch x 15 Foot

  • Your FireFlex Chimney Liner Kit will include a FireFlex 316 .006 thick stainless steel liner 13" x 13" top plate with rain cap and Tee connector with 10" snout clean out cap for horizontal connections..
Check Stock

mistcooling Patio Misting Accessory Kit

  • 1 – 2 Way “Y” Hose Connector | 3 Nozzle Plugs 10/24 Thread Size | 1 - Inline on/off Valve for 1/4'' OD tube | 3 Way Coupling Tee – ¼ Inch OD Tube.
  • Push Lock Fittings for Easy Installation.
  • Residential Misting, Commercial Restaurant Cooling, Industrial Misting System, Sports Misting Mosquito, Misting AC pre-cooling, Agriculture Cooling, Garage Misting, Greenhouse Misting, Humidification, Outdoor Cooling.
Check Stock

Kaytee CritterTrail Fun-nel Twist & Turn Small Animal Habitat Tubes

  • Allows for expansion of CritterTrail habitats.
  • Includes: 2 - Tee Tubes, 1 - U-Turn Tube, 2 - Elbow Tubes, 6 - Connector Rings.
  • 2.25" diameter and a variety of shapes and lengths.
Check Stock

Petutu Misting Cooling System 32.8ft(10M) Misting Line + 10 Brass Mist Nozzles + a Faucet Connector (3/4\) Fan Misting Kit Outdoor Mister for Patio Garden Greenhouse Trampoline for waterpark

  • 【VALUE PACKAGE & EASY TO INSTALL】Package includes: 32.8ft misting line, 10 brass mister nozzles, 10 tee joints, 1 faucet connector(3/4"), 2 end plugs, 1 teflon tape, 10 cable ties, 10 saddle clamps, 5 barbed tee fittings. Our misting cooling system kit provides all the accessories you need, so you can easily assemble misting cooling system in ten minutes..
  • 【COOLING THE HEAT】The misting system produce water mist, which absorb the heat from the outdoor surrounding in hot summer, and provides a cooling outdoor areas, cools the surrounding air temperatures up to 20℃ or 68℉. Sprays a nice fine mist to keep people cool without soaking..
  • 【SAVING ENERGY AND WATER】Misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save water compared with traditional watering. Compared with air humidifiers, it works faster and more efficiently..
  • 【PREMIUM QUALITY】Uses professional quality drip hose which made of low-density polyethylene, flexible and durable, suits in any weather. No matter heavy cold or hot! Brass nozzles have good corrosion resistance which is 2 times the life of similar nozzles, good sealing tubing connector. All these premium composition accessories are used to made the ....
Check Stock