ReviewsTeflon Plug Valve

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
  • Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....
Check Stock

Beduan 3 Way Shut Off Ball Valve, 1/2\ Hose Barb 2 Switch Brass Y Shaped Valve

  • This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Package including 1pcs 1/2" male Y valve, 3pcs 1/2" femalex 1/2 barb, 3pcs hose clamps, Teflon Tape..
  • Barbed edges provide positive connection..
  • Y shaped 3-way shut off ball valve has 2 switchs which can control 2 channels respectively, and can also close one of them as a 2 way valve, whatever you want..
  • Can be used in pneumatic system. It is not lead free, so please do not use it on water lines..
Check Stock

TCP Global Commercial 5 Gallon (20 Liters) Spray Paint Pressure Pot Tank with Manual Mixing Agitator

  • 2.5 Gallon Pressure Pot for Casting with Rubber Feet & Handle.
  • Features a Teflon coated steel tank for easy clean up..
  • Internal Dimensions : Wide: 9 ¼” , Deep : 10” with lid assembled.
  • Input connector, regulator, On/Off ball valve and pressure relief valve..
Check Stock

MEANLIN MEASURE 1/4 Inch NPT Air Compressor Regulator with Gauge, 0-150 PSI AR2000 Air Gauge Regulator Inline for Air Compressor and Pneumatic Tools

  • 【Easy to Read】This regulator comes with a 0~150Psi dial gauge, Makes adjusting your pressure values a piece of cake..
  • 【Port Size】The air regulator has 3 holes,Two holes of 1/4" NPT and one Gauge Port 1/8" NPT..
  • 【Adjustment Knob】The air pressure regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings, knob with a lock function, and cannot be turned when the knob is pressed..
  • 【Accurate Measurement】The air compressor pressure regulator Provides accurate gas flow regulation and Accurately measures gases..
  • 【Package included】1 x AR2000(Air Pressure Regulator), 1x Dial gauge for the 1/8" NPT,1 x Valve Shut Off Switch, 2 × 1/4" × 1/4" NPT Male Pipe, 1 × Nickel-plated Iron Air Plug, 1 × Nickel-plated Iron Air Coupler, 1 × Teflon tape..
Check Stock

4Pcs 1/8' NPT Tank Valve, A.I.FORCE Air Compressor Tank Fill Valve with Anti-Corrosion Brass Schrader Valve and Caps, 4Pcs Extra Replacement Valve Stems Cores and Schrader Valve Tool

  • [WHAT YOU GET] – You will get 4Pcs 1/8" NPT Tank Valve with built-in Schrader valves and valve caps, 4Pcs Extra Replacement Valve Stems Cores and 1Pc Schrader Valve Tool..
  • [MAIN FUNCTION] – The air compressor box filling valves can prevent air from leaking out while allowing for air to pass through for inflation. The 4 extra Schrader Valves work for replacement valve core. With Schrader Valve Tool, we can tighten the valve core or replace Schrader Valve if there is a leakage..
  • [WIDE APPLICATION] - The 1/8" Male NPT Tank Valves are used for air compressor tanks to fill vessels with air. Through the Tank valve, we can fill up the vessels with our air compressors in a rapidly speed..
  • [SPECIFICATIONS] – The air tank valves with 1/8'' NPT Male Threads and Schrader Valve. Max working pressure 200psig and Do not Exceed Maximum pressure. Teflon or similar tape can be used during install on the threaded area that screws into the tank etc..
  • [HEAVY DUTY DESIGN] – The 1/8 schrader valves are made of solid brass, which is durable, rustproof and durable. Nickel plating valve stem core can effectively prevent rust and corrosion..
Check Stock

Breezliy 2PCS 1/4' NPT Tank Valve Anti-Corrosion Brass Schrader Valve with Standard Valve Core with 1/4'' NPT Male ,Using with Air Compressor Tanks with Sealing Caps

  • ★For use with air compressor tanks to fill vessels with air.Tank valve prevents air from leaking out while allowing for air to pass through for inflation..
  • ★Max working pressure of 150PSI.Temperatures range from -65 to 250 F..
  • ★Material:100% Anti -Corrosion Solid Brass. 1/4" Male National Pipe Thread with Schrader Valve..
  • ★Comes with a cap, threaded tire core valve and brass body..
  • ★Including: 2PCS 1/4" NPT Tank Valve with 4 caps and 1 teflon tape .And Provide 1 year quality warranty..
Check Stock

61 Pcs Air Conditioning Schrader Valve Cores for Car Home A/C Accessories R12 R134a Refrigeration Tire Valve Stem Core with Double Head Dual Dismantling Remover Installer Tool Assortment Kit

  • Air conditioning valve core With Teflon Seal for Car Home R12 R134a Refrigeration air-conditioning accessories..
  • Great for mechanic and A/C repair shops,fit for Ford,Chevrolet,Toyota,Honda,Nissan,Peugeot,Volvo,Citroen,Buick,Jetta,Hyundai, and other most cars.All the valve core needed to complete the job..
  • Applies to the replacement refrigerant valve core leak.Suitable for car air conditioning replacement and maintenance, replacement refrigerant valve core leak..
  • Bear the impact,Bear the oil, Watertightness,Bear the corrosion..
  • Quantity:61 Pcs with box (60pcs Valve Cores And 1pcs Remover Tool).
Check Stock

112 Pcs Air Conditioning Schrader Valve Cores for Car Home A/C Accessories R12 R134a Refrigeration Tire Valve Stem Core with Double Head Dual Dismantling Remover Installer Tool Assortment Kit

  • Air conditioning valve core With Teflon Seal for Car Home R12 R134a Refrigeration air-conditioning accessories..
  • Great for mechanic and A/C repair shops,fit for Ford,Chevrolet,Toyota,Honda,Nissan,Peugeot,Volvo,Citroen,Buick,Jetta,Hyundai, and other most cars.All the valve core needed to complete the job..
  • Applies to the replacement refrigerant valve core leak.Suitable for car air conditioning replacement and maintenance, replacement refrigerant valve core leak..
  • Bear the impact,Bear the oil, Watertightness,Bear the corrosion..
  • Quantity:112 Pcs with box (110pcs Valve Cores and 2pcs Core Remover Tool).
Check Stock

A664 Ground Plug Valve 1/8 in 30 Psi

  • Connects Fractional Tube (Interchangable with all major brands i.e..
  • STAINLESS STEEL PLUG VALVE/3K PSI - ONE PIECE - SUPERLOK PLUG VALVE.
Check Stock

Cassius Coleman - Float Like A Butterfly, Sting Like A What You Talkin' Bout Willis?

  • PREMIUM MATERIAL: Spitfire Tube Valve Replacement is made of high dense ABS plastic, this Air Valve is sturdy, and durable..
  • ONE-WAY INFLATION: The Kayak Intex Challenger Plug Replacemnet is a one-way inflation valve, good for quick inflation..
  • Hat DESIGN: The valve hat design ensures anti-leak inflation. Please check size to make sure whether your valve bung fit this plug before purchase.
  • COME IN PAIR: Intex plug comes in pair, fit to most inflatable boat, raft, rubber dinghy, etc..
  • GUARANTEE: If you have any problem with this product, you can just take advantage of our 180 days warranty. We will replace it or give your money back for any reason..
Check Stock

Eastman 1/2 Inch FIP x 3/8 Inch OD Compression Multi-Turn Angle Stop Valve with Brass Stem, Brass Plumbing Fittings, Chrome, 10809LF

  • ANGLE SHUTOFF VALVE: The Eastman multi-turn angled stop valve is designed to control the flow of water in household fixtures such as ice makers, faucets, dishwashers, and toilets, eliminating the need to turn off the water supply to the entire home when maintenance is required.
  • COMPATIBILITY: Quarter turn angle valves are ideal for use with with faucets, toilets, dishwashers, and ice makers.
  • LEAK PROOF: Diverter shut off valve features a leak-proof performance with Teflon seats, and a removable sure-grip metal handle features an oval design for an easy grip.
  • LEAD FREE: Angle stops are composed of durable lead free DZR brass with a sleek chrome finish, and are compliant for potable water drinking applications.
  • SPECS: PEX water shut off valve features a working pressure of 125 PSI, and a working temperature of 40 degrees F to 140 degrees F.
Check Stock