ReviewsTekton Torque Wrench

Rear Axle 36MM Wrench Rear Wheel Axle Torque Wrench Hand Tools Similar to HD-47925

  • 1. Used for simple adjustment of drive belt tension or rear wheel alignment.No need to remove any exhaust components..
  • 2. Heavy duty enabling the use of great force and striking.Similar to HD-47925.
  • 3. Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier..
  • 4. Feature: This 36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque.Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque..
  • 5. Package included: -- 1x 36mm Rear Axle Wrench.
Check Stock

TEKTON Angle Head Open End Wrench Set, 11-Piece (3/8-1 in.) - Holder | WAE91102

  • Includes 11-pc. angle head wrenches: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
  • UNMATCHED ACCESS: Tekton’s 30/60 angle head wrenches save you precious time because you can continue work without disconnecting or dismantling equipment to access tight spots..
  • OPTIMIZED BEAM POSITION: The wrench beam is shifted out of your way to allow the greatest range of motion..
  • LEAN OUTSIDE JAW: We put steel exactly where needed to withstand the forces generated throughout the jaw, resulting in the leanest possible shape..
  • STRONG INSIDE JAW: By drawing the largest possible inside corner radius, we reduced the effects of concentrated stress..
Check Stock

TAGVIT 1/2 Inch Drive Digital Torque Wrench, 7.38-147.5 ft-lbs./10-200Nm Angle Digital Torque Wrench, Electronic Torque Wrench with Buzzer and LED Flash Notification, ±2% Accuracy

  • Four Torque Measurement Units: This digital torque wrench can measure from 7.38-147.5 ft-lbs./10-200Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your dif....
Check Stock

ANPUDS 1/4 Inch Drive Click Torque Wrench, 20-240 in.lb/5-25 Nm, Small Bike Torque Wrench, Lightweight 72-Tooth Dual-Direction Inch Pound Torque Wrench, MTB Mountain Road Bicycle Maintenance Tool

  • 【High Accuracy】This 1/4 inch torque wrench features precise scales of 20-240 in.lb with micro-adjustments to 2 in-lb. The torque wrench body is made of lightweight aluminum material, more accurate than ordinary chrome vanadium steel. It tests for accuracy to industry standards within ±3%..
  • 【Lightweight and Durable】The bike torque wrench head is made of chrome-molybdenum alloy, the body and handle is made of 6061 aviation aluminum within compression resistance and oxidation resistance. The torque wrench weight is only 390g. It is lighter and higher hardness than chrome-vanadium steel. Easier to use it to tighten nuts and bolts..
  • 【Easy to Use 】The inch pound torque wrench is simple to use. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value. You will feel the vibrating handle or hear a ‘click’ from the wrench when the preset torque value is reached to remind you not to apply any more force..
  • 【Dual-Direction with 72 Tooth】The inch pound torque wrench has a 72-tooth quick release reversible ratchet h....
Check Stock

TAGVIT Digital Torque Wrench (12.54-250.8 ft-lbs./17-340Nm), 1/2 Inch Drive Electronic Torque Wrench with Angle, ±2% CW Torque Accuracy with Buzzer and LED Flash Notification for Bike Motorcycle Car

  • Four Torque Measurement Units: This digital torque wrench can measure from 12.54-250.8 ft-lbs./17-340Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your different needs and usage habits..
  • Two Way Use: By adjusting the direction button on the head of the electronic....
Check Stock

EZRAC 1/2 Inch Drive Click Torque Wrench 25-250 Ft-Lb Car Torque Wrench for Tires Wheels Lug Nuts Dual Direction Adjustable Inch Pound Torque Wrench With High Reading Accuracy and Clear Scale to Read

  • 【Clear Audible Sound to Avoid over Torque】 - Our click car torque wrench features a spring-loaded lever which is adjusted by twisting the handle to the right setting. When the required torque level is achieved, the lever breaks which creates a clear audible clicking sound and vibration to sense, helping you avoid loose nuts or or cause the bolt to crack and break..
  • 【High and Stable Reading Accuracy 】 - EZARC 1/2 inch drive torque wrench has high reading accuracy ±3%. Every torque wrench for car operates within a given accuracy range, such as ±2-4%. Depending on usage, accuracy of all torque wrench in the market lasts generally every 12 months or 5,000 cycle to fall out. And This doesn't mean there's anything wrong with lug nut torque and a simple re-calibration will return the tool to delivering an accurate performance.
  • 【1/2 Inch Drive Wide Applications】 - Dual Direction Adjustable 250ft-lb torque wrench for vehicle with 22.8 inch long can generate force 25-250 Ft-Lb, which is best tools if you are working with lug nuts or anywhere on the vehicle suspension. It is suitable for large bolts and nuts like those in engine mounts. Any tightening task for both transmission and suspension, including motorcycles, daily maintenance of car, mo....
Check Stock

Vibrelli Bike Torque Wrench Set - 1/4 Inch Drive - 2 to 20nm, 0.1 Nm Micro - Essential MTB & Bicycle Torque Wrench Tools. Hex/Allen 2-10, Torx 10-30, 100mm Extension Socket, Storage Case

  • The Vibrelli Torque Wrench is a 1/4 inch, click drive torque wrench that allows you to set to the desired torque requirement for each component, preventing over tightening and striping bolts..
  • Torque range is 2 to 20nm, with 0.1nm locking micro-adjustment. Torque wrench is made in Taiwan, Certified to DIN-ISO-6789, and comes with a Calibration Certificate..
  • The Tools You Need - Comes with Allen/Hex: H2, H2.5, H3, H4, H5, H6, H8, H10. Torx: T10, T25, T30. 100mm extension bar, in a protective hard case. The perfect road bike and mtb torque wrench for seat posts, handlebars, stems, derailleurs, brakes..
  • Comfort meets Style - Anti-slip textured handle and a slim design that make it easy to use in even difficult spaces. Easy to read spring-locking micro-adjustment collar makes setting the correct torque easy. IMPORTANT: Do not over tighten. Listen/Feel for the “Click” when the correct torque is reached. Read and Watch our instructions on how to use this precision nm torque wrench correctly..
  • Ironclad Warranty: This bike torque wrench set comes with a Lifetime Manufacturer's refund/replacement warranty..
Check Stock

Chicago Pneumatic CP77786 1-In. Drive Impact Wrench - Pneumatic Tool with Efficient 6 Vane Motor. Corded Impact Wrenches

  • Durable and Easy-to-Use Tool: Torque wrench features a high-performance clutch for longer life and durability. Impact wrench is equipped with an angle down exhaust and nose cone bumper guard..
  • Heavy-Duty Applications: High torque wrench is ergonomically designed to perform reliably in maintenance activities such as equipment repair, heavy-duty automotive work, etc..
  • Adjustable Hand Tool: Pneumatic tool is built with an integrated forward/reverse 3-position power settings regulator and directional control. Adjustable torque wrench is light in weight and easy to operate..
  • Powerful Motor: Pneumatic torque wrench features a 1-in. impact with 6-in. anvil extended for efficient repair work. Air wrench works efficiently using a 6 vane-motor with a free speed of 5000 RPM..
  • Specifications: Air wrench provides the maximum torque of 1450 ft. lbs. in reverse. Pneumatic tool produces minimal noise when in use and works with an average air consumption of 8.75 CFM. Impact wrench measures 24 x 12 x 12 in..
Check Stock

Klein Tools 57060 Master Electricians Torque Wrench Set with 2 Adjustable Torque Screwdrivers, Micro-Adjustable for Accuracy, 25-Piece

  • One 7/16-Inch internal hex drive micrometer-adjustable torque wrench. Torque range: 200-1200 inch-pound (22.6-135.6 Nm) with 10 inch-pound incremements (1.1 Nm).
  • One 7/16-Inch internal hex drive micrometer-adjustable torque wrench. Torque range: 40-200 inch-pound (4.5-22.6 Nm) in 2 inch-pound (0.2 Nm) increments.
  • Ten 7/16-Inch wrench bits. Sizes: 1/8-Inch, 5/32-Inch, 3/16-Inch, 7/32-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch, 9/16-Inch, hex to square.
  • Two 7/16-Inch hex-wrench extensions. Sizes: 4-Inch (102 mm).
  • 7-Inch (178 mm) and one 7/16-Inch female hex-wrench adapter (coupler) that couples wrench bit to extension.
  • One 1/4-Inch (6 mm) adapter for screwdrivers.
  • Adjustable torque screwdriver. Torque range: 2-36 Inch-pound (0.2-4 Nm) in 2 Inch-pound (0.2 Nm increments). Accepts 1/4-Inch bits.
Check Stock

MichaelPro MP001002 Click Through Torque Wrench - 1/2 Inch Dr with 3 Sockets (11/16\

  • 【1/2 Inch Drive Click Torque Wrench】This professional click torque wrench has a highly robust ratchet mechanism for clockwise direction ideal of industrial use. Be at the forefront with your new high-grade click torque wrench, very easy torque value setting with external knob and scale-reading, visible even in low light situations. We can all agree that this is a must-have click torque wrench..
  • 【Carefully engineered industrial-grade】 Chrome Vanadium (Cr-V) steel, stay confident that your 1/2 click torque wrench will be a lifetime companion through your toughest jobs. Perfect mechanic tools set for the shop..
  • 【Made in Taiwan】With high endurance and quality, Range of work - 70 – 170 Nm ( 50 – 130 FT/LBS ).
  • 【Accuracy】 Ships pre-calibrated to +/- 4% accuracy and ready to use.
  • 【Accessory】 3 Regular Sockets 17-19-21mm included.
Check Stock

1/4'' Torque Wrench 5-25N.m Drive Click Ratchet Socket Spanner Adjustable Preset Torque Hand Tool with Storage Box Durable Handheld Cycling Bicycle Maintenance Kit for Car Bike(Blue and silver)

  • [After-sales] If you have any questions, please get in touch with us, our service team will provide you with a professional and satisfactory service..
  • [Practical Repair Tool] Every bolt on the car has a torque setting, and the torque wrench can accurately determine how tight the bolt is. This is a very practical tool for car repair..
  • [High Precision] 1/4'' torque wrench range 5-25 (N.m), industrial grade torque wrench, accurate to ±3%. Suitable for all 1/4" drive sockets, ideal for small vehicles/bikes etc..
  • [Durable and Non-Slip] The torque wrench is made of chrome vanadium alloy steel for strength and durability. The non-slip handle is comfortable to grip and easy to use..
  • [Adjustable Torque Wrench] Fully adjustable torque wrench with ratchet head, set to ensure proper tension and load setting on nuts and bolts. Smooth action mechanism provides precise torque setting every time..
Check Stock