ReviewsTelecommunication Ic

LVYUAN Variable Transformer Variable Voltage Regulator 0-130V Output 110V-120V Input 500VA

- Adjustable transformer, Max.500VA, Input Voltage: AC 110V/60Hz, Output Voltage(Variable): AC 0-130V/60Hz.
- Replaceable 5A Fuses (Extra 4 for replacement), Overload Protection, with Output Voltmeter.
- Built-in copper coil, material quality, more secure and durable. The Core Components of the Transformer Are Made of Environmentally Friendly....
- What You Get: A 500VA Variable Transformer with U.S. Standard Plug, 4 Extern Replaceable 5A Fuses, A Manual..
- Suit for Motor Speed control, Label Printing Machine, EE Labs, Test for Railroad Switching, Power Supplies, Satellite, Equipment, Telecommunication....

【ADVANTAGES】Light weight, good flexibility, high temperature resistance, moisture resistance, corrosion resistance..
【APPLICATION】Antenna systems, communication systems, audio and video transmission systems, security data signal transmission, etc..
【FEATURES】High frequency and low transmission loss, low voltage standing wave ratio, physical foaming flame-retardant, good weather resistance, durable use indoors and outdoors..
RG142 coaxial cable is used for interconnection between telecommunication equipment and is widely used in commercial wireless applications. Can be used directly and can maintain good shielding effect when complex underground connections are realized..

- Enclosed, non-isolated, Adjustable transformer, with Output Volt Meter.On/Off Power Switch(Lighted),5A fuse & power cord..
- Over-voltage protection, the use of more security.Contact voltage transformer, wide voltage range (0-130V).
- Built-in copper coil, material quality, more secure and durable.High efficiency and with no waveform distortion..
- Suit for home coffee roasting,Motor Speed control,Label Printing Machine,EE Labs,Test for Railroad Switching, Power Supplies, Satellite,Equipment,Telecommunication Equipment..
Please note that most device have surge (when first turn on) much higher than operating amp rating. E.g, motor with 5 amp rating may have over 10 amp surge, and you will need 10 amp transformer..

Fit FT-450D FT-950 FT-891 FT-991 FTDX-1200 FTDX-3000 etc with 4 pin power socket.
Fit TS-590SG TS-890s TS-480 TS-480HX TS-480SAT TK-90 TK-790 TK-890 TK-690 etc.
Fit IC-7000 IC-7100 IC-7200 IC-7300 IC-7600 IC-7610 IC-9700 IC-910H IC-F9511HT etc.
Fit DX-SR9T DX-SR8T VX-1400 VX-1700 VX-6000 and other radio transceiver use 4pin power canble plug.

HIGH QUALITY:These SMA male RF coaxial terminators are made of high quality brass for durability..
EXCELLENT PERFORMANCE:They have good reliability, excellent performance and long service life.q.
IMPEDANCE AND FREQUENCY:The impedance is 50 ohm, and frequency is wide between 0 to 6Ghz..
WIDELY USED:Widely used for antennas, GPS system, base station application, cable assembly, electrical components, instruments, wireless communication system, telecommunication system, etc..
TOTAL TEN PIECES:There are total ten pieces of connectors in this set that you may use for many projects..

Juno trim series 27 is designed for a 6-inch juno housing and has an aperature of 5.75 inches. Perfect when paired with incandescent and LED juno housings.
Airtight and energy Star when paired with select housings - see spec sheet for complete List.
Compatible with IC22, IC22 W, IC22S, IC22R incandescent housings with 5W PAR30, 75 PAR30L or 65W BR30 light bulbs.
Compatible with IC2, TC2, TC2R housings and can be used with 50W PAR30, 75 PAR30L or 65W BR30 Light bulbs.
Compatible with IC22LED, IC22RLED and TC22LED LED housings.

As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Easily convert Nano SIM card into Micro SIM or Standard SIM card, and Micro SIM card into Standard SIM card..
Allows you to switch between different phones, tablets and devices - No SIM cutter or other tools required..
Tested and approved by Telecommunication companies worldwide..
Compatible with Mobile phones, Tablets and other SIM enabled devices..
Retail package includes: Micro to Regular, Nano to Regular, Nano to Micro, Polish Chip, and Eject Needle..

Up to 200W power per channel or 380W on one channel for fast charging.
Charges AND balances Smart G2 batteries with one simple IC3 or IC5 connection — no separate balance lead needed.
Auto Charge recognizes Smart battery charging parameters and begins safe, accurate charging automatically when connected.
Smart software tracks and stores numerous smart battery data.
Includes IC3 and IC5 charging output ports — eliminating the need for a separate IC3 or IC5 adapter to charge Spektrum Smart batteries.

Package includes: U Type IC Chip Extractor x 1 + PLCC IC Chip extractor x 1..
The U-shaped IC extractor is used to pull out the IC chip on the circuit board. It is easy to use and simple. It is an ideal tool for families and students to do experiments..
PLCC IC chip extractor is a spring-assisted extraction tool, specially designed to remove PLCC..
The body is made of stainless steel, and there is a PVC insulation package outside to prevent static electricity from damaging the IC components..
It is very suitable for professional maintenance personnel, such as TV/DVD/PC maintenance personnel or IC workers..

Row to Row Distance(Approx):15.24mm/ 0.6".
As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.