ReviewsTelemetry Radio Module

AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator

... Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
[Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
[Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
[Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
[Feature 2] SHARI PiHat uses a single circuit board which contains installed surface mount (SMD) parts as well as ....

Check Stock

FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver for RC Multirotor FPV Racing Drone

Notes： Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver. Ultra mini size and light weight.
Supports redundancy function Support telemetry and Smart Port enabled.
US-BASED CUSTOMER SERVICE & TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail....

Check Stock

Traxxas T-Maxx 3.3: Powered 4WD Maxx Monster Truck (1/10 Scale), Red

TRX 3.3 racing engine delivers massive power and torque to all 4 wheels to conquer any terrain at speeds up to 45mph.
TQi 2.4GHz Transmitter with Traxxas Link wireless module, factory installed telemetry sensors, and TSM stability control.
Tunable, sealed front and rear differentials and auto-shifting two-speed transmission.
Ready-To-Drive with included NiMH receiver pack and EZ-Start battery, chargers, fuel-filler bottle, spare glow plug, and more!.
Extended chassis, heavy-duty chassis braces, transmission skid plate and 6.3" Maxx all-terrain tires on mirror-chrome 3.8" Hurricane wheels.

Check Stock

Traxxas T-Maxx 3.3: Powered 4WD Maxx Monster Truck (1/10 Scale), Black

TRX 3.3 racing engine delivers massive power and torque to all 4 wheels to conquer any terrain at speeds up to 45mph.
TQi 2.4GHz Transmitter with Traxxas Link wireless module, factory installed telemetry sensors, and TSM stability control.
Tunable, sealed front and rear differentials and auto-shifting two-speed transmission.
Ready-To-Drive with included NiMH receiver pack and EZ-Start battery, chargers, fuel-filler bottle, spare glow plug, and more!.
Extended chassis, heavy-duty chassis braces, transmission skid plate and 6.3″ Maxx all-terrain tires on mirror-chrome 3.8″ Hurricane wheels.

Check Stock

Traxxas 6533 TQi 2.4GHz Micro Receiver with Telemetry & TSM (5-channel)

TSM allows you to experience the power and speed of your Traxxas model by making it easier to control on slippery surfaces.
Braking is dramatically improved as TSM works to keep you arrow straight.
TSM can be fine-tuned (or turned off) for different surfaces by adjusting the multi-function knob on the TQi transmitter.
Five channel receiver accepts sensors to provide real-time telemetry on Traxxax Link app.
Receiver requires a Traxxas TQi radio with internet connectivity via the Traxxas Link mobile app.

Check Stock

FrSky 900MHz R9M 2019 Long Range Module System Compatible R9 Series (ACCST/Access)

● 900MHz/868MHz working mode Compatibility: R9 series (ACCST/ACCESS).
● Long range, low latency and high precision RC system Vin Voltage Range: 6.5V~13V.
● 4 Optional RF power (Non-LBT Version) Vin Voltage Range: 6.5V~13V.
● Telemetry mode（25mW）/non-telemetry mode（200mW / 500mW） (LBT Version).
● Smart Port enabled and support telemetry data transmission Telemetry Interface: Smart Port Upgrade Interface: Smart Port.

Check Stock

Snap Circuits Plastic Pro Electronics Exploration Kit SC-500 & Battery Eliminator AC-SNAP for Age 8+

Build over 500 experiments with 76 parts.
Experiments include: digital voice recorder, AM radio, digitally tuned FM radio, AC generator, screaming fan, whistle switch and much more!.
Parts included: snap wires, slide switches, resistors, an FM radio module, and a 7-segment LED display.
No soldering - no tools - it's a snap! Snap Circuits parts require no tools and and click together to ensure solid electrical connections.
NO BATTERIES needed for Snap Circuits projects.
REPLACES Battery Module for your Snap Circuits projects.
PRODUCES 3 different voltages: 3.0, 5.0, 6.0 volts.
DESIGNED for 110-120 VOLT electrical outlet ~ CAN NOT work on 240V outlets.

Check Stock

BETAFPV LiteRadio 3 RC Radio Transmitter with Nano Module Bay for External TX Module Support Simulator Joystick Calibration Firmware Update for RC Models Multirotor Airplane Drone - Frsky Mode 2

...al】 LiteRadio 3 has a newly designed Joystick Gimbal. With ergonomic stick ends, the stick is detachable, anti-slip, and adjustable in height, it is long longevity up to 120k times rotations. The potentiometer is positioning accuracy and fast response sensitivity, bringing a good experience to your flight.
【Nano Module Bay】LiteRadio 3 reserved a nano bay on the backside, it supports CRSF protocol external TX module. Highly recommend BETAFPV ELRS Nano Module, which is compatible with the LiteRadio 3 radio transmitter and makes CRSF protocol available.
【Long Use Time】Equipped with a built-in 2000 mAh 1S battery and charging module, you can charge by USB and it can work up to 15 hours without an external module. Meanwhile, it designs a Low-Power warning to indicate a low battery. It indicates a low battery and needs to be re-charged if the blue light flashes slowly and the buzzer beeps continuously.
【BETAFPV Configurator Supported】LiteRadio 3 upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter or BETAFPV Configurator. BETAFPV Configurator is a utility designed to simplify updating, configuring, and tuning the radio transmitter. Easy....

Check Stock

Futaba R324SBS R324SBS 2.4GHz RX TFHSS 4CH Telemetry SBus2 RC Radio Receiver

This 4-channel receiver pairs perfectly with Futaba T-FHSS surface transmitters!.
Bi-directional telemetry transmits key data to your radio’s display..
S.Bus2 capability eliminates cable clutter in your system’s set-up..
Automatically detects Normal and High-Speed modes..
Comes with Dual Antenna Diversity for superior reception and a battery fail-safe..

Check Stock

Maisto 1:27 Scale Jeep Wrangler Rubicon Diecast Vehicle (Colors May Vary)

Replica V8 engine, transmission housing and transfer case cover and protect the motor while improving scale appearance.
DIG function lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius.
Spektrum DX3 2.4GHz DSMR radio offers superior range, response, and interference resistance and is Smart technology compatible.
High-quality Spektrum Firma Smart 40A ESC/receiver provides the innovative telemetry capabilities of exclusive Spektrum Smart technology.
Battery and Charger required for completion (accepts both Standard and Shorty LiPo batteries).
Included components: (1) Axial SCX10 III Jeep JL Wrangler 4WD RTR.

Check Stock

EXCELLENT ELITE SPANKER Tactical Universal Radio Holster Pouch Holder Case Bag Molle Adjustable Military Walkie Talkie Holder(Black)

Nylon radio holder molle pouch constructed by high quality and durable 500D Cordura Nylon material, high elastic rubber and high quality UTX Duraflex Buckle. Size:3.5 in*2.2 in*8.3 in(L*W*H)..
The nylon molle radio bag is more-in-one pouch. Side of the high-strength magic sticker panel and elastic rope design is convenient to opening and closing ,this radio molle pouch can help you easy and quickly to put the walkie-talkie in and and take out. Better stabilize the walkie-talkie..
The molle radio bag with molle module system on the back, it can be hung on the equipment with molle module, tactical vest, backpack, belt, etc. Drainage hole at the bottom..
This molle universal radio pouch suitable for camping, tactical sports, hiking, climbing, EDC use and running fitness exercise. Keep your hand tools conveniently on you while you work..
100% Quality Warranty: Your satisfaction is our first priority, we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND with 90days.
If you encounter any problem while using, never hesitate to send email to us and we will make it all right for you..

Check Stock