ReviewsTemperature Ball Valve

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
Check Stock

Showerhead Shut Off Valve with Stainless Handle 304 Stainless Steel Mini Ball Valve 1/2 Female X Male NPT Thread Water Flow Control Valve Regulator Chrome Shower Head Flow Control Valve 1

  • FITMENTS: 1/2'' standard connections, NPT- female and male, compatible with the most common showerhead connectors in the North America..
  • FUNCTIONS: This stainless steel ball valve use as showerhead shut off valve, RV shower shut off valve or water saving adjustable valve, which also widely used at home, bathroom, kitchen, RV, Motorhome, etc..
  • RELIABLE & LEAKPROOF: This shower shut off made by one piece construction and has a blow-out proof stem to reduce leakage and valve damage. The maximum operating temperature of this shower on off valve is 325 degrees F..
  • DURABLE MATERIAL: This shower head shut off valve made of 304 stainless steel body and ball with much higher performance (high heat-resistance, high corrosion resistance and pressure-resistance), more durable and harder than the ordinary Brass and Plastic one. Stainless steel valve cartridge can be operated up to 250 000 times switching cycles..
  • EASY TO USE: A long stainless handle and on/ off switch with quarter are designed on this shower shut off valve, which made the nozzle easy to turn and control the water flow easily!.
Check Stock

Float Valve for Water Tank Stainless Steel Float Ball Valve 3/4 Inch DN20 Floating Ball Valve Switch Automatic Brass Toilet Valve Float Valves for Stock Tank Pool Water Level Control (2)

  • Work Well: the metal float valve consists mainly of a curved arm and floating ball, well made and useful, nice for cutting, distributing and changing the direction of medium flow, and you can use it to control the level of water in a water tower or pool.
  • Long Service Life: this floating ball valve is made of brass and stainless steel, sturdy and solid, reliable and serviceable to use, not easy to break, deform or bend, with nice corrosion resistance, able to be applied for a long time.
  • Where to Apply: these float water valve have a wide range of applications, practical to use, suitable for water tanks, water towers, boiler machines, rice steamers, water pumps and other places you want.
  • Well Sealed: the water tank float switch features a rubber seal, with nice flexibility, not easy to tear or wear, high temperature resistant, playing a fine sealing role.
  • Meanwhile, its float rod can be adjusted, simple to use.
  • Enough to Use: this package provides you with 6 pieces of float ball valves, whose model is DN20, thread is about 3/ 4 inch, applicable medium is water, able to withstand temperature of 0-50 degrees, sensitive and flexible, enough for you to use and replace.
Check Stock

Cash Acme Water Heater Tank Booster Pro, Thermostatic Mixing Valve 3/4

  • COMFORT:Thermostatic mixing valve increases usable hot water on existing water heaters and new NAECA compliant water heaters.
  • PROTECTION: Controls hot water to prevent injury from scalding when showering, bathing or washing by ensuring water is delivered at a safe temperature to all fixtures.
  • SAFETY: Reduces the risk of Legionella bacteria growth by enabling hot water to be stored at a germ killing 140°F (60°C), while ensuring that water is delivered at a safe temperature to outlets.
  • COST EFFECTIVE: Adding a Tank Booster Pro thermostatic mixing valve to an existing water heater allows water to be stored at a higher temperature.
  • SHARKBITE: use with SharkBite Flexible Water Heater Connectors and Ball Valves for easy installation in systems using copper, CPVC or PEX tubing.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female....
Check Stock

1/2 Brass 12V DC Electric Solenoid Valve Normally Open Air Water NBR

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/2 Brass Electric Solenoid Valve 110V AC NBR Seal N.O Air Gas,Fuel

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/2" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

1/4 Brass 12V DC Electric Solenoid Valve NPT NBR Seal Normally Open Air Water

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with diesel fuel, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • 1/4" Brass direct acting with NBR gasket..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, U.S. SOLID will gladly replace it..
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1/2 Stainless Steel Electric Solenoid Valve 12V DC Normally Closed

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes....
Check Stock