ReviewsTemperature Compensated Flow Meter

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..

Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

Check Stock

BTMETER Digital Anemometer Barometer Handheld, for Wind Speed Temperature Wind Chill Tester w/Humidity, Altitude, Barometric Pressure Meter for Climbing Drone HVAC CFM BT-100WM

... Point, Barometric Pressure and Altitude. With data log, Tripod hole for mounting, it’s ideal for outdoor activities:Long Range shooting, Hunting, Sailing, Kite flying, Drone Driving, CFM air flow test..
➤【HIGH PRECISION】Digital wind meter for measure wind speed range 0.67 ~ 67.1 mph( +/- 5% accuracy).
Wind temperature range -10~45℃,14℉-113℉(+/-2 ℃/℉).
Wind meter measurement altitude from 0-19685 Ft. Resolution: 0.2 mph, 0.2℉,0.1% RH. So you can be rest assured to get fast and accurate reading..
➤【EASY TO USE】Measures different readings such as Max, Min, Average, Current Wind Speed, display in 5 units: mph, ft/min, km/h, m/s or knots. Temperature (Celsius/Fahrenheit), Elevation(M, Ft), Atmospheric pressure(inHg, hpa mbar). And LCD backlit screen makes it easy to read in day or at night..
➤【LOG THE BAROMETER DATA】This handheld wind speed meter can also log 16 groups of barometric pressure data for record, compare and analyse the relationship between temperature, humidity, and height. It’s compact pocket sized Pro anemometer for weather station, long distance shooting, HVAC testing.
➤【SAVE YOUR BATTERY】Auto shutdown after 10 mins without operation, low battery indicator to remind you change the battery. 1 year warran....

Check Stock

Extech AN100 CFM/CMM Mini Thermo-Anemometer

Large display of airflow or air velocity.
Simultaneous display of air flow or air velocity plus ambient temperature.
Easy to set area dimensions (cm2) are stored in the meter's internal memory for the next power on.
3 percent velocity accuracy via low friction 2.83 Inch D (72mm) ball bearing vane wheel on 3.9 Feet (120cm) cable.

Check Stock

Nuova Simonelli Oscar II Pour-Over Espresso Machine - Red

New material, new design Among the new features of Oscar II is to the extensive use of stainless steel that immediately shows strength and solidity, as well as enhancing the machine..
Compact At only 30 cm, Oscar is able to work in both a home and office setting..
Perfect extractions The brewing unit is temperature compensated giving consistent and quality extractions..
Professional Oscar enables the production of espressos or cappuccinos just like in a café. The thermo-compensated group and steaming system are derived from larger, professional machines..
Versatile Available with a direct water line connection or a 2.3 liter reservoir to brew quality espresso anywhere..

Check Stock

Testo 550i Kit I App Operated Digital Manifold and 2 x 115i Pipe Clamp Thermometer for air Conditioning, Refrigeration Systems and Heat Pumps – with Bluetooth

Dependable: The testo 550i with its rugged housing (IP54) block was specifically created for harsh environments, offering the reliability needed by HVACR technicians.
User-friendly: With its compact design, 2-way valve block and automated probe connection, the HVAC meter provides convenient handling in difficult to access environments.
Smart App: Take advantage of clearly visualized documentation from a smartphone or tablet. Remotely operate service and maintenance tasks and send results directly from the job site.
Efficient: The app-controlled air conditioning meter accurately determines high and low pressure as well as evaporation and condensation temperature.
Includes 115i: With a grip of up to 1.5”, the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return temperature measurements of pipes.

Check Stock

Spectra Precision GL622N Dual-Slope Grade Laser Level Kit with HL760 Laser Meter, C70 Rod Clamp, RC602N Remote Control, 10 Ah NiMH Batteries, Charger, Use for Tiling, Construction, Flooring

The GL622N pro Laser Level tool kit comes with a HL760 Laser meter, C70 rod clamp, RC602 remote control, and is rechargeable with its 10 Ah NiMH batteries and included charger.
Automatic self-leveling rotary laser serves as a detector for measuring fast, easy horizontal level, grade and vertical plumb setup, with a large compensated grade range from 25%.
Whether you are cutting title, concrete or any other construction or welder job, get it right with the first cut, thanks to its temperature and grade measurement, and cross axis compensation.
Digital Grade Match measures and displays the existing grade over unknown ground and eliminates time consuming and error prone calculations.
HL760 digital receiver with clamp provides readout of elevation, exact distance from grade displayed, and anti-strobe sensor to prevent false reading from jobsite strobe lights.

Check Stock

Flow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue

✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....

Check Stock

ANNMETER Pro HVAC Anemometer- Air Flow Velocity Meter AN-826A 0.001~100Mph Wind Speed Gauge,Handheld Wind Tester Measuring Airflow Movement Temp with Max AVG Current

【CFM Anemometer】Built with lightweight vane sensor to ensure sensitivity for accurate air flow measurement, Extendable cable and wand can extend to 79 inches, makes this cfm wind speed meter tester can easily reach to air outlet of AC, Vent..
【Pro Airflow Air Velocity Meter】-Accurately measure wind speed ranging from 0.001~100Mph (+/- 5% of reading), wind temperature from 14~113℉(+/- 1.8℉). 5 wind speed units optional: m/s, Ft/min, Knots, Km/hr, Mph.
【Wide Applications Wind Detector】-Handheld wind indicator not only can be applied in HVAC system installation and checking, dust vent detection, air conditioner maintenance, but also for outdoor activities: hiking, camping, boat sailing, sky surfing, shooting, drone Flying..
【Humanize Designed Anemometer】-For continuous measurement, you can fix the gauge on a tripod with the thread hole at the bottom. Auto/ Manual power off function for battery saving. Backlight LCD provides clear reading in darkness or dim place..
【Must Have One Air Flow Meter】-A solid storage case comes with AN-826A, for easy carrying and protecting damage from transport. Buy with confidence! For product defective or any further problem, ANNMETER provides you unconditional warranty!.

Check Stock

Forney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders

Combination of regulator and flow meter as one single stage piston design unit.
Provides accurate regulation of gas flow.
Impact resistant machined brass body, polycarbonate flow tube and outer cover.
Features regulator and flow meter in one unit.
Provides accurate regulation of gas flow designed for MIG and TIG applications.

Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.

Check Stock