ReviewsTemperature Sensor Replacement

BBQGO Barbecue Oven Grill Thermometer Probe and Clip Replacement for Maverick ET732 ET733 Ivation IVA-WLTHERM IVAWT738 with 6ft Stainless Steel Cable

Replacement or additional probe compatible for Maverick ET732, ET733 & Ivation IVA-WLTHERM & IVAWT738.
High Temperature Rated: Up to 700 °F (380°C).
6ft Braided Stainless Steel Cable and Sensor: 15.2cm. Clip Hole size: – 0.16in/4mm, 0.18in/4.5mm, 0.25in/6.35mmThree Different hole size are matched....
If it shows"---" in your thermometer, please unplug the sensor, try again and make sure you insert it fully..
Do not put the sensor/the steel cable in the fire or place it in which temperature is higher than 700 °F (380°C), or it will broken the sensor and....

Check Stock

Jovitec Refrigerator Defrost Replacements WR51X10055 Defrost Heater WR55X10025 Temperature Sensor WR50x10068 Defrost Thermostat Compatible with GE

You will receive: 1 x refrigerator defrost heater WR51X10055, 1 x refrigerator temperature sensor WR55X10025, 1 x refrigerator defrost thermostat....
WR51X10055 defrost heater: it can replace for No. WR51X10030, AP3183311, PS303781, 914088, AH303781, EA303781, PS303781, WR51X10030.
WR55X10025 temperature sensor: it can replace for No. 914093, AP3185407, WR50x10027, WR50x10034, WR50x10055, WR50x10067, WR55X10025, WR55X10026,....
WR50x10068 defrost thermostat: it can replace for No. PS1017716, 1170024, AP3884317, WR50x10015, WR50x10017, WR50x10018, WR50x10028, WR50x10051,....
General replacement: refrigerator replacement parts made of durable material that ensures a long life using, compatible with refrigerator of GE,....

Check Stock

Replacement RTD Temperature Sensor Probe Compatible with Louisiana Pellet Grill& Country Smoker Grills Replace Part 50151

COMPATIBILITY - Temperature sensor replacement for Louisiana Grill Series& Country Smoker Series (TIP: Please check spade connector style).
REPLACE OEM PART - Smoker tempe sensor replace original accessories 50151, comes with 1pc screw and nut..
GRILL THERMAL SENSOR SIZE - 2" Internal Grill Sensor, 36" stainless steel wire allows use with the control board..
USEFUL TIPS - To avoid temp probe damaged, do not place probe in water, wires rolled up in a large, loose coil during storage..
FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger..

Check Stock

Dorman 926-041 Engine Oil Pressure Sensor Compatible with Select Models

Ideal replacement - this oil pressure sensor directly replaces the original sensor on specified vehicles and applications.
Durable construction - this sensor is specifically designed to withstand pressure and temperature extremes for reliable performance and accurate....
Cost-effective solution - offers original equipment fit and function at a competitive price.
Trustworthy quality - backed by a team of designers and engineers in the United States.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Check Stock

W10181986 Oven Temperature Sensor Probe Compatible With Whirlpool Kenmore - Repalces AP6016450 8273902 W10131826 W10181986 WPW10181986VP

✅ MODEL NUMBER: W10181986 Oven Temperature Sensor Probe - Replaces part number: AP6016450, 8273902, W10131826, W10181986, WPW10181986VP.
✅ EASY TO INSTALL: It is made exactly fit for different brands Whirlpool, May-tag, Kenmore, Amana Fits models: [Whirlpool]:....
✅ PRODUCT SPECIFICATIONS: W10181986 Oven Temperature Sensor Probe measures and regulates oven temperature in conjunction with the oven control....
✅ HIGH-QUALITY PART: The replacement part is made from durable high quality material and well-tested by the manufacturer - Ensure long-lasting and....
✅ MONEY-BACK GUARANTEE: Please check the model number carefully before ordering. If you are unsure about the compatibility, you can send us your....

Check Stock

Dorman 926-397 Engine Oil Pressure Sensor Compatible with Select Models

Ideal replacement - this oil pressure sensor directly replaces the original sensor on specified vehicles and applications.
Durable construction - this sensor is specifically designed to withstand pressure and temperature extremes for reliable performance and accurate measurement.
Cost-effective solution - offers original equipment fit and function at a competitive price.
Trustworthy quality - backed by a team of designers and engineers in the United States.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Check Stock

Acuity Brands Lighting - NCM PDT 10 RJB - Low Voltage Ceiling Mount Sensor, Passive Dual Technology, Large Motion/Extended Range 360deg Lens, Rear RJ-45 Ports, SKU - 230CEP

... low profile allows this sensor to blend seamlessly into your ceiling..
| SUPERIOR THAN PIR | Our microwave sensor emits microwave signals to detect moving object, the same way a radar speed detector works. It is more accurate and consistently outperforms a PIR motion sensor, which tends to be less sensitive in high temperature and over sensitive in low temperature..
| BETTER DETECTION | Features 360-degree detection with 30-ft diameter detection range. Radar waves are capable of penetrating glass, paper, plastic and thin walls. Compared with a PIR motion sensor, a radar motion detector is less likely to be limited by place of installation and could detect objects before they see the sensor..
| PHOTOCELL ENABLED | With built in photocell operated by switch for daylight (24/7 mode) or night mode (only trigger after dark), making the sensor a perfect replacement of PIR sensors..
| SAFE TO USE | This sensor emits microwave power at 10 milliwatt, which is 1/100 of a normal cell phone (typically 1-2 watts of power). Suggested install height is 8-12 ft., compared to a cellphone which is normally used within 3 ft. You can use this radar motion detector safely and with peace of mind..

Check Stock

Engine Knock Sensor Wire Harness Kit - Replaces 12601822 917-033 - Compatible with Chevy GMC Cadillac - Suburban Silverado Tahoe Sierra Yukon Avalanche 4.8 5.3 6.0

Replacement Knock Sensor Wire Harness - connects to the knock sensors on your engine and receives signals from both sensors. These signals taken from....
Replaces Part# 12601822, 917-033, 317 033, 917033 - While this is not a genuine OEM part it is a direct replacement for the factory wire harness and....
Compatible Replacement for Chevrolet, GMC, Cadillac, Buick, Isuzu, Hummer & Pontiac Vehicles - 1999 - 2006 Silverado including 1500 & 2500 HD models |....
OEM Fit, Quality, Finish - This knock sensor wiring harness is constructed from durable, high temperature wire to avoid melting, chaffing, and....
Lifetime Warranty - This knock sensor wiring harness features a lifetime warranty. If the harness or any parts ever breaks, frays, or otherwise fails....

Check Stock

K-Swap Coolant Temperature Sender Sensor Adapter K20 K24 Engine Swap Fit for Honda Civic with Fittings Adaptor 3/8-1/8NPT

FUNCTION: To make sure that your cluster still keeps you informed of the Temperature of your engine you need to install this Adapter..
APPLICATION: This K-Swap Coolant Temperature sender Sensor Adapter Fit for Any k-swap engine k20 k24，Acura integra，Honda civic，Honda Crv，Accord，Crx，MR2..
FEATURES: This adapter replaces the OEM idle air assist vale (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into..
PACKAGE INCLUDE: 1x Fitting Adaptor，1x Universal Coolant Temp Sender Sensor..
FREE RETURN AND WARRANTY: We accept free return and replacement if it is not the correct one. And Guarantee with One Year Limited Warranty..

Check Stock

Automatic Sensor Touchless Bathroom Sink Faucet,Chrome Vanity Faucets,Hands Free Bathroom Water Tap with Control Box and Temperature Mixer,Easy Installation

...le to turn off after washing your hands. Super convenient and clean. Better keep it for a good looking..
【Save Water】Free faucet supplies water as soon as hands are within sensing range, and stops when you move away your hands, reducing overall water usage without sacrificing water pressure..
【Premium Materials&Temperature Adjustable】 The core material of this automatic sensor faucet is industrial-grade brass, which is made of solid brass made of chromium. Smooth touch, rust and corrosion resistance, which increase the durability and reliability of the structure.You can adjust water temperature with the temperature mixer according to your preference. Hot and cold hose, temperature mixer are included..
【Easy Installation】: This hands free sink faucet with Instruction (Diagram) Included. Comes with all necessary accessories for installation. Includes faucet mounting hardware, US standard thread fitting and cold/hot hoses. All the the parts for installing are included. No need to buy extra parts..
【Warranty & Customer Service 】: Sanimi lifetime limited warranty for touchless sink faucets and we offer 24 X7 E-mail Support,90 Days Money Back,free replacement,12 months warranty Guarantee!Buy with confidence,please!.

Check Stock

NUHFUFA HSU-07 Humidity Module Humidity Sensor Module Dehumidifier Replacement Accessories Part

Humidity Sensor Module Temperature Sensor Fit for many kinds of dehumidifiers. Please confirm the model number of the module before purchase, you can refer to the picture on this page..
Good anti-interference ability and stable performance, improving machine working efficiency. Replacement is the original disassembled accessory, please do not place an order if you mind..
Fit for household, warehousing, tobacco, pharmaceutical and other industries..
Universal suitable for temperature and humidity meters, humidification equipment, dehumidification equipment, high-end air conditioners and other products..
If you have any problems with the accessory, please let us know if we can be of any other help and we will give you satisfied answer..

Check Stock