ReviewsTenoning Jig For Table Saw

Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4\ x 3/8\ Miter Slots • Also Works with Many Router Tables and Band Saws

  • Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate..
  • The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence..
  • Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn’t exert spring like pressure against the board. This means it can....
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

HORUSDY 40-piece Metal & Woodworking Jig Saw Blade Set with Storage Case,T-Shank blades, HSS/HCS, Blades Assorted for Wood, Thin Sheet Metal Steel, Aluminum Cutting

  • [High Material]: The jig saw blades are made with premium quality HCS and HSS for enhanced quality and precise cuts..
  • [Fast Cutting]: They provide Curved for efficiency Cuts, Rapid Cuts and Plunge Cuts in Hard and Soft Woods, Thin Sheet Metal Steel, Aluminum and more..
  • [Widely Applicable]: T-shank design fits BOSCH and DEWALT jig saws, Fits most jig saw models.
  • [Wood and Metal ]: 30-Piece Woodworking Jig Saw Blade (T101D, T101BR, T144D) for wood, straight and very fast cuts. 10-Piece Metal Jig Saw Blade (T118A) for Thin Sheet Metal Steel, Aluminum and fast cuts..
  • [Durable box]: Each jig saw blade is put in a separate box, which is very durable.
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to fee....
Check Stock

Monique: Behind Bars

  • Micro-Make Super Value Packages Are An Economical Way To Expand Your Workshop Or Get Involved In A New Hobby..
  • Take our best-selling saw, add some of our most popular accessories for it, and what do you get? A versatile mini woodworking and metal cutting workstation like no other..
  • Package includes: MicroLux Tilt Arbor Table Saw, 40 Tooth Carbide Tip Saw, Taper Jig, Ripping Gauge Set, Featherboard and Fence Set Blade, Angle Setter/Protractor, Ferrous Cut-Off Disk, and Blank Blade Plates.
  • Value if purchased separately is $529.60!.
Check Stock

Jigsaw Puzzles: Best Volume 3

  • Micro-Make Super Value Packages Are An Economical Way To Expand Your Workshop Or Get Involved In A New Hobby..
  • Take our best-selling saw, add some of our most popular accessories for it, and what do you get? A versatile mini woodworking and metal cutting workstation like no other..
  • Package includes: MicroLux Tilt Arbor Table Saw, 40 Tooth Carbide Tip Saw, Taper Jig, Ripping Gauge Set, Featherboard and Fence Set Blade, Angle Setter/Protractor, Ferrous Cut-Off Disk, and Blank Blade Plates.
  • Value if purchased separately is $529.60!.
Check Stock

Jigsaw Blade Set for Wood,Plastic and Metal Cutting with Tool case Storage (18)

  • Great value kit: Assorted professional jig saw blades 21 piece set.
  • High quality: The jig saw blades are made with premium quality HCS/ HSS/ Bi-Metal for enhanced quality and precise cuts.
  • Wide application: jig saw blades 21 piece include 6TPI,10TPI,6TPI,12TPI,21TPI, ideal for application to wood, metal,and wood with nail . Provide general household cutting needs and a variety of materials.
  • Compatible:T-shank design fits most jigsaws such as :KOWOOD,Bosch , DEWALT , BLACK+DECKER , TOOLDO , Makita , SKIL , Ryobi and Rockwell BladeRunner jig saws.
  • Affordable: Direct Sale from Factory, provide the best cost but remain in great quality.
Check Stock

Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Woodworking Tools (300mm/11.81inch)

  • This is a miter bar usually used in table saw woodworking works..
  • Made of high quality aluminium alloy, with strong strength and reliable durability..
  • Easy assembling, makes it very easy to construct that ideal jig..
  • For building various jigs on your table saw. Includes threaded mounting holes and hardware for easy attachment to any application..
  • After-sales service: If you have any questions, please feel free to contact us..
Check Stock

General Tools Woodworking Dovetail Jig - 12 Template Kit for Furniture & Wood Cabinet Making

  • ADJUSTABLE DOVETAIL JIG: The 1-piece aluminum layout ensures both ends of the dovetail joint match up evenly, and the integrated clamping design....
  • JOINT BOX: Our set includes 1 dovetail joiner tool and a single 14-degree, 1/2" dovetail router bit for use with a hand table or table router. The....
  • WOOD MARKER: Professionals and novices can make half-blind or through dovetail joints, including box joints. It has various applications like....
  • DOVETAIL JIGS FOR WOODWORKING: Complete a professional carpentry fixture with our professional-quality saw. You can easily adjust the micro jig....
  • GENERAL TOOLS: We're a recognized leader in developing specialized precision tools dedicated to delivering exceptional customer service. We encourage....
Check Stock

BLACK+DECKER LDX112PK Lithium Drill and Project Kit, 12-volt

  • VERSATILE 4-TOOL SET – Includes a cordless drill/driver, jig saw, sander, and LED flashlight for a wide range of applications..
  • CORDLESS DRILL/DRIVER – Includes a built-in LED work light to illuminate your worksurface and dark areas..
  • 11-POSITION CLUTCH – Drill/driver designed to prevent stripping and overdriving screws for added control..
  • CORDLESS JIG SAW – Equipped with tool-free blade release mechanism for fast and easy blade changes..
  • BUILT-IN BLADE STORAGE – For added convenience when using the jig saw..
Check Stock

POWERTEC 71614 Miter T Locking Bolts Improved Flange Bolt & T-Bolt Accessory for 3/4 x 3/8 Miter Gauge Slots on Table Saws Router Table & Unisaw to Mount Feather Boards and Jigs 10PK

  • FUNCTION: When utilized with t-slotted miter slots, these woodworking tools hold workstock in place for positioning and fixturing for a wide range of applications or any type of jig to your table saw, router table, or any tool with a standard 3/4" x 3/8" miter gauge slot.
  • CLAMP ACTION: Clamping action is greatly improved over competitive miter track slot fixture hardware kits. Locking hardware seamlessly slides into and secures with its oversized t-slot mount and allows you to put clamping pressure anywhere along the flush-mounted T-slot or T-track on Table saw.
  • PRECISION and COMPATIBILITY: Allows t-slot stops to be made quickly from both ¾” and 1-1/2” stock – Ideal for hold downs, glue ups and jig fixture assembly.
  • DIMENSIONS: Length 2-inch | Threaded 1/4”-20 | Isolation Mount Oval Shaped Head .971” long by .882” wide by .106” thickness.
Check Stock