ReviewsTension Lever

UTG Recon 360 TL Bipod, 8"-12" Center Height, Picatinny, Black

  • 3 Position Folding Legs And Lockable Leg Extensions Equipped With Nonslip Rubberized Foot Pads.
  • Fine-Tunable Tension Adjustment Lever Applies The User Desired Amount Of Tension To The Bipod'S 360° Panning & 15° Tilt.
  • Low Profile Offset Picatinny Mount With Knurled Thumb Nut And Reinforced Steel Cross Bolt.
  • Durable Aircraft Aluminum Construction Finished In A Matte Black Anodization.
Check Stock

UTG Recon 360 TL Bipod, 8"-12" Center Height, M-LOK, Black

  • 3 Position Folding Legs And Lockable Leg Extensions Equipped With Nonslip Rubberized Foot Pads.
  • Fine-Tunable Tension Adjustment Lever Applies The User Desired Amount Of Tension To The Bipod'S 360° Panning & 15° Tilt.
  • Durable Aircraft Aluminum Construction Finished In A Matte Black Anodization.
Check Stock

8629 Wheel Hub Removal Tool & 6007 Lower Control Arm Prying Tool & Brake Caliper Hooks

  • The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
  • After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
  • The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
  • The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
  • With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
Check Stock

UTG Recon 360 TL Bipod, 5.5'-7.0' Center Height, M-LOK, Black

  • 3 Position Folding Legs and Lockable Leg Extensions Equipped with Nonslip Rubberized Foot Pads.
  • Fine-tunable Tension Adjustment Lever Applies the User Desired Amount of Tension to the Bipod's 360° Panning & 15° Tilt.
  • Durable Aircraft Aluminum Construction Finished in a Matte Black Anodization.
  • UTG The Best Never Rest Lifetime Warranty - Simply put, your purchase is covered by our lifetime warranty.
Check Stock

Jiayouy 1/4 Ratchet Wrench Drill Bit Drum Key Set for Jazz Drum Tuning Key - Type A

  • Made of Plastic and zinc alloy materials,durable and sturdy..
  • Perfect for all drums with standard 1/4" socket square tension rods..
  • Makes changing top and bottom drumheads a breeze..
  • Quick-flip reversing lever permits instant ratchet reversal. Lever to change rotation direction..
  • Drill Bit Key fits conviently into Ratchet or drill for super-fast tuning..
Check Stock

4Pack Heavy Duty Toggle Latch Clamp 1320lbs 4003 Latch-Style Toggle Clamp with Lock Hook Pull Action Latch with Catch Plate Metal Quick Release Draw Latch for Trunk Jig Smoker Door Tool Boxes

  • ...bon steel with black coated, heavy duty construction and rust-resistant.
  • 1320lbs holding capacity, stronger than normal 4003 style latch clamp.
  • Adjustable Latch Buckle: The pull latch clamp is designed with an adjustable lever handle that has a locking range of 5-7/8 to 6-1/2inches.
  • easy to install, just twist the tension hook for maximum sealing effect.
  • Comfortable Grip with Plastic Cover: The metal quick draw latch has the plastic handle cover for quick and comfortable operation.
  • the oil and stain resistant handle is very suitable for indoor and outdoor use, especially for smoker door.
  • Unique Lever Handle Toggle Catch Latch: Package includes 4pcs 4003 style Heavy Duty toggle latch, highly durable construction and hardened steel pivot points for durability and versatility.
  • mount the draw arm over a latch plate and pull the handle to clamp.
  • Wide Applications: Toggle latches and pull clamps have a knee joint and operate as a knee lever, which close items such as tension devices, opening stops and various parts.
  • metal toggle latches have a wide variety of uses and are quick locking tool for smoker lid, tool boxes, trailer tailgates, cabinet door, truck, jig, flight case and so on.
Check Stock

Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6\ x 10.2\ Mounting Holes - S2979-HD

  • Heavy duty replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern.
  • Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders.
  • Tilt control - push lever in to lock tilt, pull out to unlock.
  • Twist hand wheel to tighten or loosen (adjust) backward tilt tension.
Check Stock

Yaheetech Mesh Executive Chair, Wine Red Ergonomic Office Chair with Wheels/Lumbar Support for Office Lady

  • Robust construction: Our mid-back office chair is constructed of hard-wearing nylon mesh, durable star base, solid rolling casters and SGS-certified pneumatic cylinder, which is capable of holding up to 125kg/275lb..
  • Claw base & 360 degrees wheels: Twisting and turning about is integral within the office. So we adopt a reliable claw base and equip it with 5pcs 360-degree swivel wheels, ensuring fluent and quick movement and keeping up your quick pace of work..
  • Office recliner: By simply pushing or pulling the lever, this mesh office chair can be tilted and leaned backward or locked in place for various sitting positions. A tilt tension control knob under the seat is provided to adjust the recliner tension..
  • Pneumatic seat-height adjustment: The seat height of this computer mesh chair can be simply adjusted from 36.5cm/14.4'' to 46.5cm/18.3'' by a little push-up/press down at the lever under the seat according to your needs..
  • Breathable mid-back design: This mesh office chair features densely knitted mesh backrest, which allows better airflow and breathability, accelerates heat and moisture dissipation. Curved mid-back design supports your spine's natural curve and protects your lower and middle back as it prompts you to sit straight..
Check Stock

Yaheetech 2 Pack Mesh Office Desk Chairs, Ergonomic Height Adjustable Computer Chairs, Executive Chair Rolling Chair for Girls, Boys Black

  • Robust construction: Our mid-back office chairs are constructed of hard-wearing nylon mesh, durable star base, solid rolling casters and SGS-certified pneumatic cylinder, which is capable of holding up to 125kg/275lb..
  • Claw base & 360 degrees casters: Twisting and turning about is integral within the office. So we adopt a reliable claw base and equip it with 5pcs 360-degree swivel casters, ensuring fluent and quick movement and keeping up your quick pace of work..
  • Ergonomic backrest: Curved backrest perfectly lines up with the human body line and supports your spine’s natural curve. The lumbar support system resembles a pair of hands, pushing up and holding your low back..
  • Office recliner: By simply pushing the lever or pulling it out, our mesh office chairs can be tilted and leaned backward or locked in place for various sitting positions. A tilt tension control knob under the seat is provided to adjust the recliner tension..
  • Pneumatic seat-height adjustment: The seat height of this computer mesh chair can be simply adjusted from 36.5cm/14.4'' to 46.5cm/18.3'' by a little push-up/press down at the lever under the seat according to your needs..
Check Stock

WOLTIS Rifle Bipod Outdoors CNC QD Tactical Picatinny Rail 4.75-9 inch Bipod Flat Adjustable Black

  • 4.75" to 9.0" height adjustment, T6061 aluminum, hard anodized technique, rubber feet for stability.
  • Mounts to 20mm Picatinny rail via included ADM 170-S Lever.
  • Locks securely in 4 different positions: stowed back, 90 degrees straight down, 45 degrees forward and stowed forward.
  • 15° +/- of preloaded Pan, 15° +/- of preloaded Cant.
  • QD locking level, adjustable tension - just push up on the lock lever (when not mounted) and the nut rises up out of the recess allowing you to finger....
Check Stock

WOLTIS Adjustable Keymod Rifle Bipod - 4.75 to 9 Inch Bipod for Both Keymod/Picatinny Rail System

  • 4.75 to 9.0 inch height adjustment rifle bipod, mounts to both keymod rail system and picatinny rail via included ADM 170-S Lever..
  • Locks securely in 4 different positions: stowed back, 90 degrees straight down, 45 degrees forward and stowed forward..
  • 15° +/- of preloaded Pan, 15° +/- of preloaded Cant..
  • QD locking level, adjustable tension - just push up on the lock lever (when not mounted) and the nut rises up out of the recess allowing you to finger....
  • Packaged with 1 piece bipod, 1 piece 3 slot keymod picatinny rail with mounting adapters..
Check Stock