ReviewsTerk Pi B 2

2 Pack Wired USB Controller Gaming Joystick for SNES Game pad for Windows PC MAC Computer Raspberry Pi Sega Genesis emulator

♥ Supported Operating system:for Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
for Linux UBUNTU, for Linux Mint, for Android Linux (via an USB OTG cable).
♥ Supported Device (With USB storage device):for PC, Notebook Computer, Laptop Computer.
for Android Smartphone: connect via an USB OTG cable.
for Raspberry Pi (for RPI, Raspberry pie):for Raspberry Pi 1 Model B, Model A, for Raspberry Pi 1 Model B+, for Raspberry Pi Zero, for Raspberry Pi 2, for Raspberry Pi 3 Model B, for Raspberry Pi 3,for Retro Pie. --- Note: NOT SUPPORT for Android TV BOX..
♥ Buttons: D-pad, Start, Select , A ,B,X,Y.
♥ USB 2.0 port game controllers , plug and play, no addition software..
♥ Package included: 2 X Game Controller Gamepad as images display.

8" 40 Pin Ribbon Cable for Raspberry pi 3B ,Raspberry pi 2 model B,Raspberry pi 1B+, Raspberry pi 1A+,Raspberry pi zero W, Raspberry pi zero.
Pin Pitch: 2.54 mm,Their Diagram as Product image show.
2x40 Pin Male to female IDC 2.54mm pitch ribbon cable flat GPIO Cable.
GPIO 40P 40-pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ and 3.5¡± 5 inch TFT touchscreen LCD display are not including..
SamIdea is a Registered Trademark, can not sold without authorization..

Plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+.

✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
User manual, pls refer to Geekworm WiKi search(X820)..
✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....

This is a no-nonsense protective case for 3.2" TFT LCD for Raspberry Pi 3 Model B.
The case is a three-piece injection-moulded ABS enclosure that snaps together around 3.2" TFT LCD and Raspberry Pi 2.
It provides the best available protection/accessibility for 3.2" TFT LCD and Raspberry Pi 2 Model B.
Wall Mountable. Access to all Pi 2 consumer ports..

【Overview】This C790 Hdmi to CSI module takes the incoming HDMI signal and converts it into a separate CSI signal&I2S audio signal. ( Raspberry Pi 4 and Pi ZeRo only support 2 lan, max 1080P@50fps, and CM4 can support 4 lan, max 1080P@60fps).
【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero/Zero W/Zero 2W, Raspberry Pi CM4/CM3 with IO board..
HDMI Input: supports up to 1080P60Hz on Raspberry Pi.
【Packing List】: ✔1 x HDMI to CSI-2 Module C790 ✔1 x FPC 15pin 1.0mm cable（15cm length） ✔1 x FPC 22pin 0.5mm cable（15cm length） ✔1 x I2S cable (15cm length).
【User manual】Refer to our WiKi search C790..

Compatible with: TERK PI-B KW1107A PIB P1-B Class 2 Transformer Power Cord.
Brand New, High Quality AC Wall Power Supply Adapter Charger, not original but 100% compatible.
Intelligent Switching circuit will recognize a full battery & automatically switches to a save mode Plug never heats or overcharges the battery, Short....
Please don't confuse us with the low quality / low current ones in the market..

Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
With Quiet Cooling Fan, it can drop the temps for your Pi.
Include Raspberry Pi Heatsink, Better Cooling Experience.

Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
Compatible With Current Raspberry Pi's including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
With Quiet Cooling Fan, it can drop the temps for your Pi.
Include Raspberry Pi Heatsink, Better Cooling Experience.

Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.

Aluminum case ,Customize for Raspberry Pi 3/Raspberry Pi 2/ Raspberry Pi B+.
High dimensional accuracy, surface anodic oxidation process. Durable, good heat dissipation.
Good ventilation,easy carrying Simply Clicks Together Enclosure,good heat dissipation.
Smart design，not block the wifi/BT signals.
Access to all Raspberry Pi 3 /Raspberry Pi 2 / Raspberry Pi B+ consumer ports and GSI, camera and GPIO connectors.