ReviewsTerminal Block Lever Awg

1769-OA16 Compact I/O 16 Point Output Module 1769OA16 1 Year Warranty

  • Pitch 3.81mm/0.15" screw terminal block..
  • Terminal block: wire range 26-16AWG, strip length 5mm, Metric M2 slotted screw..
  • FR-4 fiber glass PCB, dual copper layers..
  • Module Dimensions: 83mm x 87mm x 45mm (W x L x H)..
Check Stock

UOHGDPY DIN Rail Terminal Blocks,Universal Compact Wire Wiring Connector (40 pcs connectors+4 pcs Article in Parallel+4 pcs Digital Identification+2 pcs Fixed clamp+40 pcs Screw)

  • 【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time..
  • 【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box..
  • 【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc..
  • 【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail..
Check Stock

LuoQiuFa10 Set 6-Pin 5.08mm Pitch Male Female PCB Screw Terminal Block

  • Dimensions:Pin Distance 5.08 mm/0.2 inches.
  • Total dimensions: about 31 x 22 x 15 mm (length * width * height).
  • Package Content : 10 Set x PCB Terminal Block.
Check Stock

3V 1Amp Power Adapter Supply 100-240 AC to DC 3Volt 1000mA 2.1mm X 5.5mm Plug 3V 1A AC/DC Power Supply Transformer

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....
Check Stock

Power Wheel Adapter for Ridgid AEG 18V Hyper Lithium Battery Secure Battery Adapter with Fuse & Wire Terminal,14 Gauge Wire Power Convertor for DIY RC Trucks RC Toys Robotics Work Lights

  • Our power wheel adapter can install and lock your battery easily. Compatible with Ridgid AEG 18V Lithium-Ion battery. Power wheels adapter has 13....
  • 212 push-type quick terminal block, just lift up the lever, insert the stripped wire, and press the lever closed, holds tight and makes a solid....
  • There are six fixing screw holes on the adapter, you can fix it in any position of the DIY product. Only need to move the battery into the groove of....
  • This is design from mould injection, not 3D printed. High-quality ABS Plastic, safe and durable, corrosion resistance and moisture resistance perfect....
  • Package includes: 1x Battery Adapter with a Heat-resistance 14 AWG wire, 1pack inline fuse holder and 3 pack 30A fuse replacements,1 pack 212....
Check Stock

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

  • Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
  • Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
Check Stock

TEMCo 4ga-750mcm HYDRAULIC LUG CRIMPER TOOL TH0034 - Electrical Battery Terminal Cable Wire

  • ❀【HIGH PRECISION JAW DESIGN】 Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has....
  • ❀【ROTATE CRIMP DIES】The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG....
  • ❀【EASY OPERATION】 Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper....
  • ❀【ERGONOMIC DESIGN】The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can....
  • ❀【12PCS LUGS TUBULAR RING TERMINAL CONNECTORS】The crimper set contains 12PCS ring terminal connectors, save your time and money to buy other....
Check Stock

UK5-HESI DIN Rail Fuse Holder Disconnect Terminal Blocks Screw Clamp UK5RD (Without LED indicated, Grey, 10)

  • ✯ Category: Fuse Holder Terminal Block.
  • Type: UK5-HESI. Suitable for various sizes of fuse tubes, such as: 5x20, 5x25, 6x30, etc..
  • ✯ Material: Nylon PA66 Housing, Fire retardant, Flame retardant..
  • ✯ Installation Method: DIN Rail Mounted, universal mounting foot to easily mount onto DIN rail..
  • ✯ Fuse terminal block for cartridge fuse inserts without indication. The lever-actuated fuse holder makes fuse insertion and extraction safe and easy..
  • ✯ Compact Fuse holder Terminal Block used in control circuit applications..
Check Stock

Blue Sea Systems ST-Blade Water-Resistant 4 Circuit Fuse Block, 5056

  • Voltage Max. Operating: 32V DC, Amperage Max. Operating: 80A per block / 25A per circuit, Fuse Type ATO or ATC fuses & circuit breakers, Input Wire Size: (1) 8 AWG to 4 AWG, Load Wire Size: (4) 16 AWG to 10 AWG, Bus Material: Tin-Plated Copper C11000, Mounting Thru-hole: Accepts 1/4" (6mm) screws, Screw terminal: 4x #8-32 Screws with captive star lock washer, Stud terminal: 1 x #10-32.
  • Water-resistant design with standard ring or spade type terminals allows for simple wiring with standard tools.
  • Accepts a wide range of wire sizes, ATO and ATC fast-acting blade fuses, and ATO/ATC-Style Low Profile Circuit Breakers.
  • Includes 3 wire plugs to maintain water resistant rating if less than 4 loads are required and 4 write-on circuit labels.
  • Nests with other ST-Blade Water-Resistant Fuse Blocks and Water-Resistant 100A Bus Bars to reduce wire.
  • Fuses and circuit breakers sold separately. Storeage for spare fuse and fastener in cover.
  • Not ABYC compliant, not intended for marine applications, use PN 5056100 for marine use.
Check Stock

CZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.

  • Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • GPIO status LED and power 5V / 3.3V indication..
  • GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
  • Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
  • Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
Check Stock