ReviewsTerminal Block Lug

EZSync HDMI to Terminal Block Adapter Kit, 2X Pack, Solderless Breakout Board, Plastic, EZSync912

  • The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
  • Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
  • Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
  • Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
  • If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.
Check Stock

CZH-LABS Screw Terminal Block Breakout Module Board for Arduino MKR.

  • DIN Rail Mount Pluggable 8x3 Position 10A / 300V Screw Terminal Block Distribution Module..
  • Input terminal: Screw terminal block, pitch 5.0mm/0.197.
Check Stock

150Pcs Copper Wire Terminal Connectors, AWG 2 4 6 8 10 12 Ring Lug Kit with Heat Shrink, IBosins 70pcs Battery Cable Lugs with 80pcs Heat Shrink Tubing

  • 150Pcs Copper lugs Set: 150Pcs ring teminal connectors kits, including 70pcs AWG 8 6 4 2 10 12 copper lugs and 80 red and black heat shrink tubes in different sizes, they were packed in a plastic box with 12 grids.
  • Quality Material: The copper wire terminals is made of high-quality annealed copper, and the surface is tin-plated to protect the copper from corrosion, which has good electrical conductivity, heat resistance and corrosion resistance.The heat shrink tubing is made of polyolefin material, which is non-toxic and flame retardant.
  • Reliable Design: The copper wire lug is in accordance with the universal size of the American standard, and the well-designed high-standard flared opening for wire insertion easier. In addition, we have carefully designed a inspection window to help you work better, and each copper lug has a specification mark so that you can quickly find the right terminal.
  • Applications: This ring lug kit are suitable for terminal wiring of professional equipment such as distribution boxes, batteries, cables, etc., and can also be used for boats, motorcycles, automobiles, home appliances, toys and so on.
  • Instruction: There may be slight bumps in the copper lug during long-distance transportation. If you have any problems concerning our ....
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...able (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
Check Stock

Battery Cable Wire Lug Crimping Tool Kit with 170pcs Copper Wire Lugs, Wire Crimping Tool for AWG 10-1/0 Electrical Lug Crimper, with Cable Cutter, 210pcs Dual Wall Adhesive Heat Shrink Tubing

  • 【Package Includes】- You will get a battery cable wire lug crimping tool, a cable cutter, 170pcs copper ring terminal block, 210pcs heat shrinkable tube, the size and quantity are complete to meet your various needs..
  • 【Rotary Crimping Mold】- Professional cable terminal crimping tools are 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (similar to AWG 10, 8, 5, 3, 2, 0). It uses high-precision jaws to ensure a tight connection after crimping..
  • 【High-quality Material】- All ring terminals are made of electrolytic grade copper to achieve maximum conductivity. The heat shrinkable tube is made of high-quality polyethylene material, which is thick and durable..
  • 【Ergonomic Design】- The handle of the crimping device is up to 10" long and is wrapped with soft rubber. The ergonomic lever structure design can increase friction and make you more labor-saving when crimping..
  • 【Wide Application】- These lugs are very suitable for distribution boxes, ships, golf carts, solar panels, household applications, etc. It is also widely used in vehicles, motorcycles, boats, and DIY wires..
Check Stock

SOLEILLUNE Battery Cable Lug Crimping Tool for AWG 10, 8, 6, 4, 2, 1 Terminals with 60Pcs 8Specs Copper Ring Cable Lugs Kit Heavy Duty Wire Terminal Crimper for Electrical Connectors

  • ... handle of the Wire Crimper tool is made of high-quality 6061-T6 aluminum alloy, with a lighter weight of only 2.35 pounds, which makes the crimping tool more convenient to carry and use. The head of the wire crimping tool is made of high-quality carbon steel with longer service life. The long handle of the battery terminal crimper wrapped with non-slip soft vinyl help you use less effort when crimping..
  • 【ROTATE CRIMP DIES】The professional cable terminal crimping tools are available in 6 crimping sizes, 10, 8, 6, 4, 2, 1 AWG (Corresponding to 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²), and use a hexagonal rotating crimp die which is retained in place with a spring loaded locking pin. Thanks to processed by Wire EDM Cutting, the crimp die is more accurate than the ordinary casting die or stamped die..
  • 【EASY OPERATION】Open the handle of the crimper, then press the Lockpin and rotate the crimp jaw to the size you need, place the cable and lug, then pull strongly on the ratcheting wire terminal crimper to make a great crimp on the cable lugs. Finally, rotate the connector 90 degrees to another direction and repeat the previous step for secondary crimping. Crimping twice is more secure..
  • 【APPLICATION AND COMPATIBLE】Compatible with copper, aluminum....
Check Stock

Tnisesm/60pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03G

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 40pcs x 2 Pin Screw Terminal Block Connector.
  • 20pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

Tnisesm/70pcs 2 Pin & 3 Pin 5mm/0.2inch Pitch PCB Mount Screw Terminal Block Connector (Can be Spliced) TN-T03B

  • Product Type: Boxed 2 pin & 3 pin Screw Terminal Block Connector, with a phillips screwdriver..
  • Package include: 60pcs x 2 Pin Screw Terminal Block Connector.
  • 10pcs x 3 Pin Screw Terminal Block Connector.
  • 1pcs x phillips screwdriver. All packed in a plastic container for easy use..
Check Stock

UNO Screw Terminal Block Breakout Module with Aluminum Enclosure for UNO R3.

  • UNO Screw Terminal Block Breakout Module with Aluminum Enclosure. With the adapter module you can easily extend UNO projects to industrial control....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. Standard IDC40 pitch....
  • Support for Desktop, Panel mount, Wall-mount or DIN rail mount. DIN rail mount supports vertical or horizontal place mounting. Can support width 35mm....
  • Enclosure: High quality aluminum enclosure, thickness 1.5mm/0.06", with attractive and extremely durable powder coat painting and clear laser marking....
  • Packing list: 1x Terminal Block Board(assembled standoffs and screws), 1x Aluminum enclosure(top and bottom covers), 5x M3x4mm Flat head screws(for....
Check Stock

Blue Sea Systems 5035 / Blue Sea 5035 ST Blade Fuse Block w/Cover - 6 Circuit Independent w/o Negative Bus

  • DIN Rail Mount 20 Position Screw Terminal Block Distribution Module with 10 Channel Fuses..
  • Terminal postion 01 to 01, 02 to 02 ......, 10 to 10 direct connected, rated current 30Amp for per channel..
  • Terminal postion F1 to F1', F2 to F2' ......, F10 to F10' connect via fuses, rated current 10Amp for per channel. Replaceable fuses with easy to operate fuse holders, fuse holders for D5mm x L20mm tube fuse, factory-installed fuses Slow Blow 10Amp..
Check Stock

Glarks 315Pcs Quick Splice 2.8mm 4.8mm 6.3mm Male and Female Wire Spade Connector Wire Crimp Terminal Block with Insulating Sleeve Assortment Kit

  • Product Type: High quality wire crimp terminal block with insulating sleeve assortment kit.
  • Product Meterial: The terminal block are made of tin-plated red copper and the insulating sleeves are made of nylon, high conductivity, anti-oxidation, durable enough for your use.
  • Package Include: In this kit, it include 2.8mm/4.8mm/6.3mm male and female crimp terminal connector block 210pcs and 105pcs insulating sleeves total 315pcs packed in a plastic box.
  • Easy to Use: You just need to connect the male and female terminals at both ends, and then the male and female terminals docked to complete the wiring easily.
  • Application: These spade terminal can be widely used to home appliances, auto, audio system for battery or rocker switch quick connecting/disconnecting.
Check Stock