ReviewsTerminal Connector

Terminal Removal Tool, 76PCS 52 Sizes Economical Terminal Release Kits for Auto Car Wire Connector, Pin Extractors Key Set for Household Harness, Stainless Steel Rubberized Grips Terminal Ejector Kits

• Wide Applications: This terminal removal tool can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal. Most home appliances, cars, motorcycles and many other electronic devices..
• Easy To Use: No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage..
• Material: Stainless Steel, Plastic. The pins terminals removal tools are made of stainless steel and plastic, the needles are steel and the width between needles can be change on your own if necessary, It has strong flexibility and durability. which can be used repeatedly, the O ring handle make it more safe to operate the terminal pins connectors. With Environmental protection rubberized grips to help with hold and control and not easy to scratch your hands..
• What will you get: There are 76 pieces terminals removal key tools in total, include 25 pieces single pin extractors, 34 pieces double pin extractors, 1 piece three pin extractor and 16 pieces casing tools. 18pcs*2+20pcs+11pcs+3*3pcs, The ....

The TAB Battery Book: An In-Depth Guide to Construction, Design, and Use

• SAE battery connector extension cable is heavy duty 10AWG wire which can reduce power loss, thick and durable. The inner core of the cable is made of high quality copper wire. Length: 60cm/2ft. Rated Voltage: 600V..
• The SAE connector is equipped with a dust cap. When the cable is not in use, the dust cap covers the SAE connector to keep the inside of the connector clean and dry. Waterproof and dustproof. Thus extending the service life of the cable..
• The other end is 0.32"/8mm Tin plated Ring Terminal. Comes with 15A, 20A, 30A fuses for electrical protection to meet your different needs. Heat and corrosion resistance, which can work normally in a wide voltage range of DC 12-24V..
• Specially designed for extending car or motorcycle battery charging terminals, maintaining a trickle charge saves the battery. Not only can it be powered directly from the motorcycle's existing SAE socket, it can also be powered from the battery by connecting to a ring terminal extension cord..
• Package include: 1 Pack SAE to ring terminal extension cable, 3PCS 15A/20A/30A fuses, 1PC SAE to SAE polarity reverse adapter..

2-GAUGE-8FT Hi-amp Universal-Quick-Connect-Wiring-KIT-Winch-Dump Trailer

• Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. If the product you recently received is a two-piece package, please contact us and we will replace it immediately..
• 8x terminal pins. Diameter of the terminal pins: 1/4" / 6.55mm Connector: 3-1/8" x 2-1/8" x 1".
• Easy to install. Insert the wires into the terminal pins, then solder or crimp them. Connector ends are identical, so either end is suitable for connection to the power or load side..
• Instruction: With online installation instruction..
• WHAT YOU GET - HYCLAT Battery Quick Connector - Ideal Gift for Father's Day, Chrismas Day, Perfect for DIY lover..

Spurtar Battery Terminal Connectors 0/4/8/10 Gauge AWG Heavy Duty Top Post AMP Battery Terminal Auto Car Audio Battery Terminal Cable Ends Replacement Positive & Negative with 2 Clear Covers and Shims

• Secure & Stable: Spurtar battery terminals are perfect for car battery terminals to make a tight and secure connection without any hassle with complex installation. It's the perfect tool to help protect the battery terminal ends in daily use..
• 2/4/8/10 AWG Gauge Inputs: Battery terminal connectors have 4 different sizes of a wiring outlet for easy wiring modification. Includes Positive (19mm) Battery Terminal Connector + Negative (17mm) Battery Terminal Connector.
• Quality Material: Battery connectors are made of zinc alloy and copper material for strong electrical conductivity to help reduce current transmission loss. Also, it can protect the battery post against corrosion to prolong the lifespan.
• Universal Fit: Spurtar Car battery terminal clamps is the best solution to organize and connect multiple cables together. Suitable for most models of car Audio battery and it works great to replace the worn out and corroded terminals.
• NOTE: The hole of the Positive Terminal is 19mm while the Negative Terminal is 17mm. The Positive is Bigger than The Negative, please check before purchasing.

Frienda 12 Pieces Red 6-10 Gauge Battery Quick Connector 50A 12-36V Battery Quick Disconnect Wire Harness Plug Kit for Motor Recovery Winch Trailer

• Suitable for: the battery quick connector provides simple and convenient method for connect or disconnect power to a winch or other electrical device such as remote battery chargers, power inverter, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
• What you receive: the package comes with 12 sets 6-10 gauge battery quick connectors, including 12 pieces connectors, 24 pieces terminal pins and 12 pieces caps, enough quantity to meet your different needs or replacement.
• Durable to use: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, durable and reliable to use, not easy to break, have long service time.
• Convenient installation: you can install these battery quick connector or disconnect plug quickly, just insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
• Stable function: there are 24 terminal pins made of red copper coated with silver in the package, which possess strong electrical conductivity and can reduce the resistance to ensure stable voltage and current.

EZSync HDMI to Terminal Block Adapter Kit, 2X Pack, Solderless Breakout Board, Plastic, EZSync912

• The EZSync912 HDMI to terminal block adapter connects all 20 signals(including shielding) from a HDMI connector to two 10-position terminal block connector. The two 10-pin terminal blocks support screw-type wiring with enclosure and cable strain relief suitable for heavy duty industrial wiring applications..
• Plastic case. Solderless terminal block. Compatible with HDMI 2.0, 1.4 and 1.3. Distance will be depending on cable quality..
• Each package contains 2x sets of adapter kit. Size: Body-50mm x 23mm x 18mm.
• Wiring diagram provided in image is for typical installation. The actual wiring could be different depending on your equipment..
• If you don't know the wiring order on the other end of the cable, you need to ohm it out if you have a meter or cut the other end and re-wire both ends.

Peplink Automatic Failover 4G LTE Mobile Router

• 1 x 10/100/1000M Ethernet WAN Port | 1 x 10/100/1000M Ethernet LAN Port.
• 802.11ac/a/b/g/n 2x2 MIMO, Simultaneous Dual-Band, Wi-Fi WAN & AP, Redundant SIM Slots 100Mbps Router Throughput.
• 2x SMA Cellular Antenna Connectors, 1x SMA GPS Antenna Connector, 2x RP-SMA Wi-Fi Connectors, 1 x 10V- 30V DC Terminal Block, 1 x 10V-30V DC Connector.
• Package Content: 1 x MAX BR1 MK2, 12V2A Power Supply, 2x Wi-Fi Dual Band Antenna, 1x GPS Antenna, 2x LTE Antennas, 4pin Terminal Block Connector.

Kat5 Terminals 8015 Multi-Connection Battery Terminals Top Post for use in Marine Power Sports RV’s Automotive Applications – 5 Gang

• Universal Positive + Negative Top Post Copper Battery Terminal Set with 2 M8 Nuts Compatible with Many Vehicles.
• This Battery Terminal Set is Approved on almost 50 different Compatible Models including: Camry Corolla Prius Sienna Tacoma Tundra Sequoia ES GS IS LS....
• Also This battery connectors are widely compatible with Altima, Maxima, Sentra, Murano, Pathfinder, Quest, Titan, Armada, Versa etc. part #....
• The battery terminals Are made of Quality Copper, and has galvanized surface, which is rust-proof and durable. Also comes with Red and Black Plastic....
• This battery terminal connector has positive and negative terminal components.
• Each battery connector is equipped with an M8 nut for easy....

Standard Motor Products S81 Pigtail/Socket

uxcell 20 Pcs 6.3mm Female Cable Crimp Terminal Connector

• Product Name: Female Spade Terminal Connector.
• Package Content: 20 Pcs x Female Spade Terminal Connector.
• Dimension: 19 x 7.7 x 5mm / 0.73" x 0.3" x 0.2"(L*W*H).

AUVIO S-Video Cable 12-ft. 15-229

• Size:(28CM/11inch) Colour:(Black) Package Quantity:(1pack) Material: PVC plastic Features: S-Video 4Pin Mini DIN Male to 2 S-Video 4Pin Mini DIN Female Video Y Splitter Extension Cable.
• Connector A: 1*4 Pin Mini DIN S-Video Male adapter ，Connector B: 2* 4 Pin Mini DIN S-Video female Y splitter cable..
• Could be used to split a DVD output to two TVs with S-video inputs. Will display the same source..
• Ideal for monitors, TV's, projectors, camcorders, VCRs, DVRs/PVRs, DVD players, and other video devices Video Y splitter signal transmission..
• Note: The S-terminal line is a standard 4-pin thread for 4- and 7-hole S-terminal holes. (9-hole S-terminal hole is not available).